Group Publications
The Materials and Manufacturing Research Group has had a steady increase of high quality publications over the previous 20+ years in journals including Acta Materialia, the Journal of Mechanics of Physics and Solids, the International Journal of Solids and Structures, Advances in Materials Science and Engineering, Composite Structures and many more including in numerous conference proceedings. Our published research now covers a vast range of topics thanks to our collaborations with other research groups and colleagues from all over the world.
Navigate to year
2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 1999 | 1998 | 1997
2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 1999 | 1998 | 1997
Filter by research group author
D. Barbera | S. Bin Jaber | I. Campbell | D. K. Do | M. Docherty | A. Feeney | M. Fotouhi | S. Fotouhi | E. Frutos-Myro | P. Grassl | E. Grustan-Gutiérrez | A. Hamilton | P. Harrison | S. Kumar | J. Lee | P. Li | S. Liu | Y. Liu | A. McBride | G. Min | D. Mulvihill | J. Perris | J. Schneider | S. Sneddon | A. Tabatabaeian | C. Triantafyllou | C. Unluer | E. Wielewski | R. Williams | L. Yusuf
D. Barbera | S. Bin Jaber | I. Campbell | D. K. Do | M. Docherty | A. Feeney | M. Fotouhi | S. Fotouhi | E. Frutos-Myro | P. Grassl | E. Grustan-Gutiérrez | A. Hamilton | P. Harrison | S. Kumar | J. Lee | P. Li | S. Liu | Y. Liu | A. McBride | G. Min | D. Mulvihill | J. Perris | J. Schneider | S. Sneddon | A. Tabatabaeian | C. Triantafyllou | C. Unluer | E. Wielewski | R. Williams | L. Yusuf
2022
Feeney, A. , Kang, L. and Dixon, S. (2022) Higher order modal dynamics of the flexural ultrasonic transducer. Journal of Physics D: Applied Physics, 55(7), 07LT01. (doi: 10.1088/1361-6463/ac3352)
Dixit, T., Al-Hajri, E., Paul, M. C. , Nithiarasu, P. and Kumar, S. (2022) High performance, microarchitected, compact heat exchanger enabled by 3D printing.Applied Thermal Engineering, 210, 118339. (doi: 10.1016/j.applthermaleng.2022.118339)
Andrew, J. J., Schneider, J., Schiffer, A., Hafeez, F. and Kumar, S. (2022) Dynamic crushing of tailored honeycombs realized via additive manufacturing.International Journal of Mechanical Sciences, 219, 107126. (doi: 10.1016/j.ijmecsci.2022.107126)
Kazaz, O., Karimi, N. , Kumar, S. , Paul, M. C. and Falcone, G. (2022) Effects of nanofluid’s base fluid on a volumetric solar collector. In: 11th International Conference on Renewable Power Generation, London, UK, 22 - 23 Sep 2022, (Accepted for Publication)
Verma, P., Ubaid, J., Varadarajan, K. M., Wardle, B. L. and Kumar, S. (2022) Synthesis and characterization of carbon nanotube-doped thermoplastic nanocomposites for the additive manufacturing of self-sensing piezoresistive materials. ACS Applied Materials and Interfaces, 14(6), pp. 8361-8372. (doi: 10.1021/acsami.1c20491) (PMID:35119271)
Logakannan, K. P., Rengaswamy, J., Kumar, S. , Ramachandran, V. and Ruan, D. (2022) Mechanical response of a novel hybrid tube composed of an auxetic outer layer. Thin-Walled Structures, 171, 108649. (doi: 10.1016/j.tws.2021.108649)
Kazaz, O., Karimi, N. , Kumar, S. , Paul, M. C. and Falcone, G. (2022) Effects of Combined Radiation and Forced Convection on a Directly Capturing Solar Energy System. 17th UK Heat Transfer Conference, Manchester, UK, 03-05 Apr 2022. (Accepted for Publication)
Choudhry, N. K., Panda, B. and Kumar, S. (2022) In-plane energy absorption characteristics of a modified re-entrant auxetic structure fabricated via 3D printing. Composites Part B: Engineering, 228, 109437. (doi: 10.1016/j.compositesb.2021.109437)
Tabatabaeian, A., Ghasemi, A. R., Shokrieh, M. M., Marzbanrad, B., Baraheni, M. and Fotouhi, M. (2022) Residual stress in engineering materials: a review. Advanced Engineering Materials, 24(3), 2100786. (doi: 10.1002/adem.202100786)
Triantafyllou, C. , Pagan, D. C. and McBride, A. (2022) Quantifying the effect of macrozones on the cold-dwell fatigue response of UD-Rolled Ti-6Al-4V using high-energy X-ray diffraction. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 834, 142498 (doi: 10.1016/j.msea.2021.142498)
Dixit, T., Al-Hajri, E., Paul, M. C. , Nithiarasu, P. and Kumar, S. (2022) High performance, microarchitected, compact heat exchanger enabled by 3D printing.Applied Thermal Engineering, 210, 118339. (doi: 10.1016/j.applthermaleng.2022.118339)
Andrew, J. J., Schneider, J., Schiffer, A., Hafeez, F. and Kumar, S. (2022) Dynamic crushing of tailored honeycombs realized via additive manufacturing.International Journal of Mechanical Sciences, 219, 107126. (doi: 10.1016/j.ijmecsci.2022.107126)
Kazaz, O., Karimi, N. , Kumar, S. , Paul, M. C. and Falcone, G. (2022) Effects of nanofluid’s base fluid on a volumetric solar collector. In: 11th International Conference on Renewable Power Generation, London, UK, 22 - 23 Sep 2022, (Accepted for Publication)
Verma, P., Ubaid, J., Varadarajan, K. M., Wardle, B. L. and Kumar, S. (2022) Synthesis and characterization of carbon nanotube-doped thermoplastic nanocomposites for the additive manufacturing of self-sensing piezoresistive materials. ACS Applied Materials and Interfaces, 14(6), pp. 8361-8372. (doi: 10.1021/acsami.1c20491) (PMID:35119271)
Logakannan, K. P., Rengaswamy, J., Kumar, S. , Ramachandran, V. and Ruan, D. (2022) Mechanical response of a novel hybrid tube composed of an auxetic outer layer. Thin-Walled Structures, 171, 108649. (doi: 10.1016/j.tws.2021.108649)
Kazaz, O., Karimi, N. , Kumar, S. , Paul, M. C. and Falcone, G. (2022) Effects of Combined Radiation and Forced Convection on a Directly Capturing Solar Energy System. 17th UK Heat Transfer Conference, Manchester, UK, 03-05 Apr 2022. (Accepted for Publication)
Choudhry, N. K., Panda, B. and Kumar, S. (2022) In-plane energy absorption characteristics of a modified re-entrant auxetic structure fabricated via 3D printing. Composites Part B: Engineering, 228, 109437. (doi: 10.1016/j.compositesb.2021.109437)
Tabatabaeian, A., Ghasemi, A. R., Shokrieh, M. M., Marzbanrad, B., Baraheni, M. and Fotouhi, M. (2022) Residual stress in engineering materials: a review. Advanced Engineering Materials, 24(3), 2100786. (doi: 10.1002/adem.202100786)
Triantafyllou, C. , Pagan, D. C. and McBride, A. (2022) Quantifying the effect of macrozones on the cold-dwell fatigue response of UD-Rolled Ti-6Al-4V using high-energy X-ray diffraction. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 834, 142498 (doi: 10.1016/j.msea.2021.142498)
2021
Bin Jaber, S., Hamilton, A., Xu, Y. , Kartal, M. E., Gadegaard, N. and Mulvihill, D. M. (2021) Friction of flat and micropatterned interfaces with nanoscale roughness. Tribology International, 153, 106563. (doi: 10.1016/j.triboint.2020.106563)
Somerset, W. E., Feeney, A. , Kang, L., Li, Z. and Dixon, S. (2021) Oil Filled Flexural Ultrasonic Transducers for Resilience in Environments of Elevated Pressure. In: 2021 IEEE International Ultrasonics Symposium (IUS), Xi'an, China, 11-16 September 2021, ISBN 9781665403559 (doi: 10.1109/IUS52206.2021.9593697)
Feeney, A. (2021) The medtech revolution and future healthcare delivery. [Website]
Feeney, A. (2021) The future of healthcare: the proliferation of data. Healthcare Global, 02 Oct.
Somerset, W., Dixon, S., Kang, L. and Feeney, A. (2021) Practical Application of Active Damping for Measurement with Narrowband Ultrasonic Transducers. 2021 IEEE International Ultrasonics Symposium, 12-16 Sep 2021. (Unpublished)
Liu, Y., Khanbareh, H., Halim, M. A., Feeney, A. , Zhang, X., Heidari, H. and Ghannam, R. (2021) Piezoelectric energy harvesting for self-powered wearable upper limb applications. Nano Select, 2(8), pp. 1459-1479. (doi: 10.1002/nano.202000242)
Gardiner, A., Daly, P., Domingo-Roca, R., Windmill, J. F.C., Feeney, A. and Jackson-Camargo, J. C. (2021) Additive manufacture of small-scale metamaterial structures for acoustic and ultrasonic applications. Micromachines, 12(6), 634. (doi: 10.3390/mi12060634)
Somerset, W., Dixon, S., Kang, L. and Feeney, A. (2021) Active Damping of Ultrasonic Receiving Sensors through Engineered Pressure Waves. 49th Ultrasonics Industry Association Symposium, 26-28 April 2021. (Unpublished)
Dixon, S., Kang, L., Feeney, A. and Somerset, W. E. (2021) Active damping of ultrasonic receiving sensors through engineered pressure waves. Journal of Physics D: Applied Physics, 54(13), 13LT01. (doi: 10.1088/1361-6463/abd582)
Cormack, J., Fotouhi, M. , Adams, G. and Pipe, T. (2021) Comparison of Concentrated and Distributed Compliant Elements in a 3D Printed Gripper. In: Towards Autonomous Robotic Systems (TAROS 2021), Lincoln, United Kingdom, 08-10 Sep 2021, pp. 193-197. ISBN 9783030891763 (doi: 10.1007/978-3-030-89177-0_20)
Fotouhi, S. , Khayatzadeh, S., Pui, W. X., Damghani, M. and Fotouhi, M. (2021) Detection of barely visible impact damage in polymeric laminated composites using a biomimetic tactile whisker. Polymers, 13(20), 3587. (doi: 10.3390/polym13203587)(PMCID:PMC8536986)
Ahmadi, M., Fotouhi, M. , Hosseini-Toudeshky, H. and Sadighi, M. (2021) Damage behavior analysis of Al/TiC particulate composite by acoustic emission monitoring and peridynamic modeling. Composites Part C: Open Access, 6, 100206. (doi: 10.1016/j.jcomc.2021.100206)
Cormack, J., Fotouhi, M. , Adams, G. and Pipe, T. (2021) Automated extraction of 3D printed parts from unfused PA12 powder using a one-shot 3D printed compliant gripper. IEEE Robotics and Automation Letters, 6(4), pp. 8655-8662. (doi: 10.1109/LRA.2021.3113383)
Kazemi, M.E., Bodaghi, M., Shanmugam, L., Fotouhi, M. , Yang, L., Zhang, W. and Yang, J. (2021) Developing thermoplastic hybrid titanium composite laminates (HTCLS) at room temperature: low-velocity impact analyses. Composites Part A: Applied Science and Manufacturing, 149, 106552. (doi: 10.1016/j.compositesa.2021.106552)
Idarraga, G., Jalalvand, M., Fotouhi, M. , Meza, J. and Wisnom, M. R. (2021) Gradual failure in high-performance unidirectional thin-ply carbon/glass hybrid composites under bending. Composite Structures, 271, 114128. (doi: 10.1016/j.compstruct.2021.114128)
Ali, H. T., Alghtani, A. H., Felemban, B. F., Abd El-Aziz, K., Saber, D., Ahmed, E. M., Megahed, M. and Fotouhi, M. (2021) Multivariable analysis for selection of natural fibers as fillers for a sustainable food packaging industry. Materials Research Express, 8(9), 095504. (doi: 10.1088/2053-1591/ac17a9)
Fotouhi, S., Khoshravan Azar, M.R. and Fotouhi, M. (2021) Achieving robust acoustic emission-based damage characterisation of scaled laminated composites under indentation. eXPRESS Polymer Letters, 15(9), pp. 839-852. (doi: 10.3144/expresspolymlett.2021.67)
Fotouhi, S., Pashmforoush, F., Bodaghi, M. and Fotouhi, M. (2021) Autonomous damage recognition in visual inspection of laminated composite structures using deep learning. Composite Structures, 268, 113960. (doi: 10.1016/j.compstruct.2021.113960)
Fotouhi, S., Tabatabaeian, A., Zuo, S., Liu, S., Heidari, H. and Fotouhi, M. (2021) Application of Electrical Resistance Change Method for Impact Damage Monitoring in Quasi-isotropic Hybrid Composites. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021.
Ali, H. T., Akrami, R., Fotouhi, S., Bodaghi, M., Saeedifar, M., Yusuff, M. and Fotouhi, M. (2021) Fiber reinforced polymer composites in bridge industry. Structures, 30, pp. 774-785. (doi: 10.1016/j.istruc.2020.12.092)
Tabatabaeian, A., Fotouhi, M. and Harrison, P. (2021) Design, Analysis and Manufacturing of a Smart Composite Skateboard with Self-sensing Capability. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021.
Delbariani-Nejad, A., Farrokhabadi, A., Haddad Khodaparast, H. and Fotouhi, M. (2021) Finite Element Reliability Analysis of Edge Delamination Onset Due to the Interlaminar Stresses in General Composite Laminates. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021. (Accepted for Publication)
Fotouhi, M. , Pui, W. X., Fotouhi, S., Jalalvand, M. and Wisnom, M. R. (2021) Detection of Barely Visible Impact Damage Using a Smart Hybrid Composite Surface Layer. In: Twenty-Third International Conference on Composite Materials (ICCM23), Belfast, Northern Ireland, 30 Jul - 4 Aug 2023, (Accepted for Publication)
Cormack, J., Fotouhi, M. , Adams, G. and Pipe, A. (2021) One-shot 3D Printed Underactuated Gripper. In: 21st Towards Autonomous Robotic Systems Conference, Nottingham, UK, 16 Sep 2020, pp. 400-404. ISBN 9783030634858 (doi: 10.1007/978-3-030-63486-5_41)
de Castro, B. D., Fotouhi, M. , Vieira, L. M. G., de Faria, P. E. and Campos Rubio, J. C. (2021) Mechanical behaviour of a green composite from biopolymers reinforced with sisal fibres. Journal of Polymers and the Environment, 29(2), pp. 429-440. (doi: 10.1007/s10924-020-01875-9)
Akrami, R., Anjum, S., Fotouhi, S., Boaretto, J., Vannucchi de Camargo, F. and Fotouhi, M. (2021) Investigating the effect of interface morphology in adhesively bonded composite wavy-lap joints. Journal of Composites Science, 5(1), 32. (doi: 10.3390/jcs5010032)
Boaretto, J., Fotouhi, M. , Tende, E., Aver, G. F., Marcon, V. R. R., Cordeiro, G. L., Bergmann, C. P. and Vannucchi de Camargo, F. (2021) Biomimetics and composite materials toward efficient mobility: a review. Journal of Composites Science, 5, 22. (doi: 10.3390/jcs5010022)
Hamilton, A., Perris, J., Convery, N., Mulvihill, D. M. and Gadegaard, N. (2021) Flexible inserts for injection molding of complex micro-structured polymer components. Macromolecular Materials and Engineering, 306(9), 2100223. (doi: 10.1002/mame.202100223)
Hamilton, A., Xu, Y. , Kartal, M. E., Gadegaard, N. and Mulvihill, D. M. (2021) Enhancing strength and toughness of adhesive joints via micro-structured mechanical interlocking. International Journal of Adhesion and Adhesives, 105, 102775. (doi: 10.1016/j.ijadhadh.2020.102775)
Xiao, Z. and Harrison, P. (2021) Fabric steering technology for variable stiffness panels: manufacture and mechanical testing. Composites Part B: Engineering, 223, 109105. (doi: 10.1016/j.compositesb.2021.109105)
Nwanoro, K., Harrison, P. and Lennard, F. (2021) Investigating the accuracy of digital image correlation in monitoring strain fields across historical tapestries. Strain, (doi: 10.1111/str.12401) (Early Online Publication)
Harrison, P. and Gonzalez Camacho, L. F. (2021) Deep draw induced wrinkling of engineering fabrics. International Journal of Solids and Structures, 212, pp. 220-236. (doi: 10.1016/j.ijsolstr.2020.12.003)
Xiao, Z. and Harrison, P. (2021) Design of buckling and damage resistant steered fibre composite laminates using trellis shear kinematics. Composite Structures, 260, 113526. (doi: 10.1016/j.compstruct.2020.113526)
Lennard, F. , Costantini, R. and Harrison, P. (2021) Investigating Tapestry Conservation and Display with Digital Image Correlation. In: Spring Forum of the ICON Textile Group, 15-20 Apr 2021, pp. 122-132. (Accepted for Publication)
Lennard, F. , Costantini, R. and Harrison, P. (2021) Understanding the role of friction and adhesion in the display of tapestries on slanted supports. Studies in Conservation, 66(1), pp. 32-43. (doi: 10.1080/00393630.2020.1761184)
Kazaz, O., Karimi, N. , Falcone, G. , Kumar, S. and Paul, M. C. (2021) Effect of Radiative Heat Transfer in Nanofluid for Volumetric Solar Collector. In: 13th International Conference on Applied Energy (ICAE2021), 29 Nov - 2 Dec 2021, (Accepted for Publication)
Kavitha, T. and Kumar, S. (2021) Multifunctionalities enabled by the synergistic effects of mesoporous carbon dots and ZnO nanorods. Materials Research Express, 8(11), 115504. (doi: 10.1088/2053-1591/abe36f)
Andrew, J. J., Alhashmi, H., Schiffer, A., Kumar, S. and Deshpande, V. S. (2021) Energy absorption and self-sensing performance of 3D printed CF/PEEK cellular composites. Materials and Design, 208, 109863. (doi: 10.1016/j.matdes.2021.109863)
Alam, F., Verma, P., Mohammad, W., Teo, J., Varadarajan, K.M. and Kumar, S. (2021) Architected poly(lactic acid)/poly(ε-caprolactone)/halloysite nanotube composite scaffolds enabled by 3D printing for biomedical applications. Journal of Materials Science, 56(25), pp. 14070-14083. (doi: 10.1007/s10853-021-06145-0)
Gupta, V., Alam, F., Verma, P., Kannan, A.M. and Kumar, S. (2021) Additive manufacturing enabled, microarchitected, hierarchically porous polylactic-acid/Lithium iron phosphate/carbon nanotube nanocomposite electrodes for high performance Li-Ion batteries. Journal of Power Sources, 494, 229625. (doi: 10.1016/j.jpowsour.2021.229625)
Verma, P., Bansala, T., Chauhan, S. S., Kumar, D., Deveci, S. and Kumar, S. (2021) Electromagnetic interference shielding performance of carbon nanostructure reinforced, 3D printed polymer composites. Journal of Materials Science, 56, pp. 11769-11788.(doi: 10.1007/s10853-021-05985-0)
Jefferson Andrew, J., Verma, P. and Kumar, S. (2021) Impact behavior of nanoengineered, 3D printed plate-lattices. Materials and Design, 202, 109516. (doi: 10.1016/j.matdes.2021.109516)
J, J. A., Schneider, J., Ubaid, J., Velmurugan, R., Gupta, N.K. and Kumar, S. (2021) Energy absorption characteristics of additively manufactured plate-lattices under low- velocity impact loading. International Journal of Impact Engineering, 149, 103768.(doi: 10.1016/j.ijimpeng.2020.103768)
Verma, P., Ubaid, J., Schiffer, A., Jain, A., Martínez-Pañeda, E. and Kumar, S. (2021) Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing. International Journal of Advanced Manufacturing Technology, 113(3-4), pp. 771-784. (doi: 10.1007/s00170-020-06580-4)
Dixit, T., Nithiarasu, P. and Kumar, S. (2021) Numerical evaluation of additively manufactured lattice architectures for heat sink applications. International Journal of Thermal Sciences, 159, 106607. (doi: 10.1016/j.ijthermalsci.2020.106607)
Verma, P., Schiffer, A. and Kumar, S. (2021) Thermo-resistive and thermo-piezoresistive sensitivity of carbon nanostructure engineered thermoplastic composites processed via additive manufacturing. Polymer Testing, 93, 106961. (doi: 10.1016/j.polymertesting.2020.106961)
Budarapu, P.R., Thakur, S., Kumar, S. and Paggi, M. (2021) Micromechanics of engineered interphases in nacre-like composite structures. Mechanics of Advanced Materials and Structures, 28(22), pp. 2327-2342. (doi: 10.1080/15376494.2020.1733714)
Damiati, L. A. et al. (2021) Materials-driven fibronectin assembly on nanoscale topography enhances mesenchymal stem cell adhesion, protecting cells from bacterial virulence factors and preventing biofilm formation. Biomaterials, (doi: 10.1016/j.biomaterials.2021.121263) (In Press)
Povall, T.M., Govender, I. and McBride, A.T. (2021) Dense granular flows in rotating drums: a computational investigation of constitutive equations. Powder Technology, 393, pp. 238-249. (doi: 10.1016/j.powtec.2021.07.051)
Steinmann, P. , Smith, A., Birang, E., McBride, A. and Javili, A. (2021) Atomistic two-, three- and four-body potentials. Spatial and material settings. Journal of the Mechanics and Physics of Solids, 154, 104507. (doi: 10.1016/j.jmps.2021.104507)
Javili, A., McBride, A.T. , Mergheim, J. and Steinmann, P. (2021) Towards elasto-plastic continuum-kinematics-inspired peridynamics. Computer Methods in Applied Mechanics and Engineering, 380, 113809. (doi: 10.1016/j.cma.2021.113809)
Liu, Z. , McBride, A. , Sharma, B. L., Steinmann, P. and Saxena, P. (2021) Coupled electro-elastic deformation and instabilities of a toroidal membrane. Journal of the Mechanics and Physics of Solids, 151, 104221. (doi: 10.1016/j.jmps.2020.104221)
Javili, A., McBride, A. T. and Steinmann, P. (2021) A geometrically exact formulation of peridynamics. Theoretical and Applied Fracture Mechanics, 111, 102850. (doi: 10.1016/j.tafmec.2020.102850)
Min, G., Pullanchiyodan, A., Dahiya, A. S., Hosseini, E. S., Xu, Y. , Mulvihill, D. M. and Dahiya, R. (2021) Ferroelectric-assisted high-performance triboelectric nanogenerators based on electrospun P(VDF-TrFE) composite nanofibers with barium titanate nanofillers. Nano Energy, 90(Part A), 106600. (doi: 10.1016/j.nanoen.2021.106600)
Perris, J., Xu, Y. , Kartal, M. E., Gadegaard, N. and Mulvihill, D. M. (2021) Tailorable and repeatable normal contact stiffness via micropatterned interfaces. Tribology Letters, 69, 106. (doi: 10.1007/s11249-021-01473-3)
Min, G., Xu, Y. , Cochran, P., Gadegaard, N. , Mulvihill, D. M. and Dahiya, R. (2021) Origin of the contact force-dependent response of triboelectric nanogenerators. Nano Energy, 83, 105829. (doi: 10.1016/j.nanoen.2021.105829)
Sneddon, S., Xu, Y. , Dixon, M., Rugg, D., Li, P. and Mulvihill, D. M. (2021) Sensitivity of material failure to surface roughness: a study on titanium alloys Ti64 and Ti407. Materials and Design, 200, 109438. (doi: 10.1016/j.matdes.2020.109438)
Sneddon, S., Mulvihill, D. M. , Wielewski, E. , Dixon, M., Rugg, D. and Li, P. (2021) Deformation and failure behaviour of a titanium alloy Ti-407 with reduced aluminium content: a comparison with Ti-6Al-4V in tension and compression. Materials Characterization, 172, 110901. (doi: 10.1016/j.matchar.2021.110901)
Ghasemi, A. R., Heidari-Rarani, M., Heidari-Sheibani, B. and Tabatabaeian, A. (2021) Free transverse vibration analysis of laminated composite beams with arbitrary number of concentrated masses. Archive of Applied Mechanics, 91(6), pp. 2393-2402. (doi: 10.1007/s00419-021-01924-2)
Muthu, M., Yang, E.-H. and Unluer, C. (2021) Effect of graphene oxide on the deterioration of cement pastes exposed to citric and sulfuric acids. Cement and Concrete Composites, 124, 104252. (doi: 10.1016/j.cemconcomp.2021.104252)
Peng, Y., Ma, K., Unluer, C. , Li, W., Li, S., Shi, J. and Long, G. (2021) Method for calculating dynamic yield stress of fresh cement pastes using a coaxial cylinder system. Journal of the American Ceramic Society, 104(11), pp. 5557-5570. (doi: 10.1111/jace.17979)
Peng, Y. M., Unluer, C. and Shi, J.Y. (2021) Rheo-viscoelastic behavior and viscosity prediction of calcium sulphoaluminate modified Portland cement pastes. Powder Technology, 391, pp. 344-352. (doi: 10.1016/j.powtec.2021.06.023)
Dung, N.T. and Unluer, C. (2021) Advances in the hydration of reactive MgO cement blends incorporating different magnesium carbonates. Construction and Building Materials, 294, 123573. (doi: 10.1016/j.conbuildmat.2021.123573)
Hay, R., Dung, N.T., Lesimple, A., Unluer, C. and Celik, K. (2021) Mechanical and microstructural changes in reactive magnesium oxide cement-based concrete mixes subjected to high temperatures. Cement and Concrete Composites, 118, 103955. (doi: 10.1016/j.cemconcomp.2021.103955)
Sonat, C., He, S., Li, J., Unluer, C. and Yang, E.-H. (2021) Strain hardening magnesium-silicate-hydrate composites (SHMSHC) reinforced with short and randomly oriented polyvinyl alcohol microfibers. Cement and Concrete Research, 142, 106354. (doi: 10.1016/j.cemconres.2021.106354)
Yang, Y., Ruan, S., Wu, S., Chu, J., Unluer, C. , Liu, H. and Cheng, L. (2021) Biocarbonation of reactive magnesia for soil improvement. Acta Geotechnica, 16(4), pp. 1113-1125. (doi: 10.1007/s11440-020-01093-6)
Muthu, M., Yang, E.-H. and Unluer, C. (2021) Resistance of graphene oxide-modified cement pastes to hydrochloric acid attack. Construction and Building Materials, 273, 121990. (doi: 10.1016/j.conbuildmat.2020.121990)
Panda, B., Sonat, C., Yang, E.-H., Tan, M. J. and Unluer, C. (2021) Use of magnesium-silicate-hydrate (M-S-H) cement mixes in 3D printing applications. Cement and Concrete Composites, 117, 103901. (doi: 10.1016/j.cemconcomp.2020.103901)
Yu, H., Yi, Y. and Unluer, C. (2021) Heat of hydration, bleeding, viscosity, setting of Ca(OH)2-GGBS and MgO-GGBS grouts. Construction and Building Materials, 270, 121839. (doi: 10.1016/j.conbuildmat.2020.121839)
Ruan, S., Qiu, J., Yang, E.-H. and Unluer, C. (2021) Influence of crack width on the stiffness recovery and self-healing of reactive magnesia-based binders under CO2-H2O conditioning. Construction and Building Materials, 269, 121360. (doi: 10.1016/j.conbuildmat.2020.121360)
Ruan, S., Yang, E.-H. and Unluer, C. (2021) Production of reactive magnesia from desalination reject brine and its use as a binder. Journal of CO2 Utilization, 44, 101383. (doi: 10.1016/j.jcou.2020.101383)
Xiao, X., Goh, L. X., Unluer, C. and Yang, E.-H. (2021) Bacteria-induced internal carbonation of reactive magnesia cement. Construction and Building Materials, 267, 121748. (doi: 10.1016/j.conbuildmat.2020.121748)
Dung, N.T., Hay, R., Lesimple, A., Celik, K. and Unluer, C. (2021) Influence of CO2 concentration on the performance of MgO cement mixes. Cement and Concrete Composites, 115, 103826. (doi: 10.1016/j.cemconcomp.2020.103826)
Dung, N.T., Hooper, T.J.N. and Unluer, C. (2021) Improving the carbonation resistance of Na2CO3-activated slag mixes via the use of reactive MgO and nucleation seeding. Cement and Concrete Composites, 115, 103832. (doi: 10.1016/j.cemconcomp.2020.103832)
Maier, M., Salazar, B., Unluer, C. , Taylor, H. K. and Ostertag, C. P. (2021) Thermal and mechanical performance of a novel 3D printed macro-encapsulation method for phase change materials. Journal of Building Engineering, 43, 103124. (doi: 10.1016/j.jobe.2021.103124)
Priyadarshi, A., Khavari, M., Bin Shahrani, S., Subroto, T., Yusuf, L. A., Conte, M., Prentice, P. , Pericleous, K., Eskin, D. and Tzanakis, I. (2021) In-situ observations and acoustic measurements upon fragmentation of free-floating intermetallics under ultrasonic cavitation in water. Ultrasonics Sonochemistry, 80, 105820. (doi: 10.1016/j.ultsonch.2021.105820)
Yusuf, L., Symes, M. D. and Prentice, P. (2021) Characterising the cavitation activity generated by an ultrasonic horn at varying tip-vibration amplitudes. Ultrasonics Sonochemistry, 70, 105273. (doi: 10.1016/j.ultsonch.2020.105273) (PMID:32795929)
Somerset, W. E., Feeney, A. , Kang, L., Li, Z. and Dixon, S. (2021) Oil Filled Flexural Ultrasonic Transducers for Resilience in Environments of Elevated Pressure. In: 2021 IEEE International Ultrasonics Symposium (IUS), Xi'an, China, 11-16 September 2021, ISBN 9781665403559 (doi: 10.1109/IUS52206.2021.9593697)
Feeney, A. (2021) The medtech revolution and future healthcare delivery. [Website]
Feeney, A. (2021) The future of healthcare: the proliferation of data. Healthcare Global, 02 Oct.
Somerset, W., Dixon, S., Kang, L. and Feeney, A. (2021) Practical Application of Active Damping for Measurement with Narrowband Ultrasonic Transducers. 2021 IEEE International Ultrasonics Symposium, 12-16 Sep 2021. (Unpublished)
Liu, Y., Khanbareh, H., Halim, M. A., Feeney, A. , Zhang, X., Heidari, H. and Ghannam, R. (2021) Piezoelectric energy harvesting for self-powered wearable upper limb applications. Nano Select, 2(8), pp. 1459-1479. (doi: 10.1002/nano.202000242)
Gardiner, A., Daly, P., Domingo-Roca, R., Windmill, J. F.C., Feeney, A. and Jackson-Camargo, J. C. (2021) Additive manufacture of small-scale metamaterial structures for acoustic and ultrasonic applications. Micromachines, 12(6), 634. (doi: 10.3390/mi12060634)
Somerset, W., Dixon, S., Kang, L. and Feeney, A. (2021) Active Damping of Ultrasonic Receiving Sensors through Engineered Pressure Waves. 49th Ultrasonics Industry Association Symposium, 26-28 April 2021. (Unpublished)
Dixon, S., Kang, L., Feeney, A. and Somerset, W. E. (2021) Active damping of ultrasonic receiving sensors through engineered pressure waves. Journal of Physics D: Applied Physics, 54(13), 13LT01. (doi: 10.1088/1361-6463/abd582)
Cormack, J., Fotouhi, M. , Adams, G. and Pipe, T. (2021) Comparison of Concentrated and Distributed Compliant Elements in a 3D Printed Gripper. In: Towards Autonomous Robotic Systems (TAROS 2021), Lincoln, United Kingdom, 08-10 Sep 2021, pp. 193-197. ISBN 9783030891763 (doi: 10.1007/978-3-030-89177-0_20)
Fotouhi, S. , Khayatzadeh, S., Pui, W. X., Damghani, M. and Fotouhi, M. (2021) Detection of barely visible impact damage in polymeric laminated composites using a biomimetic tactile whisker. Polymers, 13(20), 3587. (doi: 10.3390/polym13203587)(PMCID:PMC8536986)
Ahmadi, M., Fotouhi, M. , Hosseini-Toudeshky, H. and Sadighi, M. (2021) Damage behavior analysis of Al/TiC particulate composite by acoustic emission monitoring and peridynamic modeling. Composites Part C: Open Access, 6, 100206. (doi: 10.1016/j.jcomc.2021.100206)
Cormack, J., Fotouhi, M. , Adams, G. and Pipe, T. (2021) Automated extraction of 3D printed parts from unfused PA12 powder using a one-shot 3D printed compliant gripper. IEEE Robotics and Automation Letters, 6(4), pp. 8655-8662. (doi: 10.1109/LRA.2021.3113383)
Kazemi, M.E., Bodaghi, M., Shanmugam, L., Fotouhi, M. , Yang, L., Zhang, W. and Yang, J. (2021) Developing thermoplastic hybrid titanium composite laminates (HTCLS) at room temperature: low-velocity impact analyses. Composites Part A: Applied Science and Manufacturing, 149, 106552. (doi: 10.1016/j.compositesa.2021.106552)
Idarraga, G., Jalalvand, M., Fotouhi, M. , Meza, J. and Wisnom, M. R. (2021) Gradual failure in high-performance unidirectional thin-ply carbon/glass hybrid composites under bending. Composite Structures, 271, 114128. (doi: 10.1016/j.compstruct.2021.114128)
Ali, H. T., Alghtani, A. H., Felemban, B. F., Abd El-Aziz, K., Saber, D., Ahmed, E. M., Megahed, M. and Fotouhi, M. (2021) Multivariable analysis for selection of natural fibers as fillers for a sustainable food packaging industry. Materials Research Express, 8(9), 095504. (doi: 10.1088/2053-1591/ac17a9)
Fotouhi, S., Khoshravan Azar, M.R. and Fotouhi, M. (2021) Achieving robust acoustic emission-based damage characterisation of scaled laminated composites under indentation. eXPRESS Polymer Letters, 15(9), pp. 839-852. (doi: 10.3144/expresspolymlett.2021.67)
Fotouhi, S., Pashmforoush, F., Bodaghi, M. and Fotouhi, M. (2021) Autonomous damage recognition in visual inspection of laminated composite structures using deep learning. Composite Structures, 268, 113960. (doi: 10.1016/j.compstruct.2021.113960)
Fotouhi, S., Tabatabaeian, A., Zuo, S., Liu, S., Heidari, H. and Fotouhi, M. (2021) Application of Electrical Resistance Change Method for Impact Damage Monitoring in Quasi-isotropic Hybrid Composites. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021.
Ali, H. T., Akrami, R., Fotouhi, S., Bodaghi, M., Saeedifar, M., Yusuff, M. and Fotouhi, M. (2021) Fiber reinforced polymer composites in bridge industry. Structures, 30, pp. 774-785. (doi: 10.1016/j.istruc.2020.12.092)
Tabatabaeian, A., Fotouhi, M. and Harrison, P. (2021) Design, Analysis and Manufacturing of a Smart Composite Skateboard with Self-sensing Capability. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021.
Delbariani-Nejad, A., Farrokhabadi, A., Haddad Khodaparast, H. and Fotouhi, M. (2021) Finite Element Reliability Analysis of Edge Delamination Onset Due to the Interlaminar Stresses in General Composite Laminates. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021. (Accepted for Publication)
Fotouhi, M. , Pui, W. X., Fotouhi, S., Jalalvand, M. and Wisnom, M. R. (2021) Detection of Barely Visible Impact Damage Using a Smart Hybrid Composite Surface Layer. In: Twenty-Third International Conference on Composite Materials (ICCM23), Belfast, Northern Ireland, 30 Jul - 4 Aug 2023, (Accepted for Publication)
Cormack, J., Fotouhi, M. , Adams, G. and Pipe, A. (2021) One-shot 3D Printed Underactuated Gripper. In: 21st Towards Autonomous Robotic Systems Conference, Nottingham, UK, 16 Sep 2020, pp. 400-404. ISBN 9783030634858 (doi: 10.1007/978-3-030-63486-5_41)
de Castro, B. D., Fotouhi, M. , Vieira, L. M. G., de Faria, P. E. and Campos Rubio, J. C. (2021) Mechanical behaviour of a green composite from biopolymers reinforced with sisal fibres. Journal of Polymers and the Environment, 29(2), pp. 429-440. (doi: 10.1007/s10924-020-01875-9)
Akrami, R., Anjum, S., Fotouhi, S., Boaretto, J., Vannucchi de Camargo, F. and Fotouhi, M. (2021) Investigating the effect of interface morphology in adhesively bonded composite wavy-lap joints. Journal of Composites Science, 5(1), 32. (doi: 10.3390/jcs5010032)
Boaretto, J., Fotouhi, M. , Tende, E., Aver, G. F., Marcon, V. R. R., Cordeiro, G. L., Bergmann, C. P. and Vannucchi de Camargo, F. (2021) Biomimetics and composite materials toward efficient mobility: a review. Journal of Composites Science, 5, 22. (doi: 10.3390/jcs5010022)
Hamilton, A., Perris, J., Convery, N., Mulvihill, D. M. and Gadegaard, N. (2021) Flexible inserts for injection molding of complex micro-structured polymer components. Macromolecular Materials and Engineering, 306(9), 2100223. (doi: 10.1002/mame.202100223)
Hamilton, A., Xu, Y. , Kartal, M. E., Gadegaard, N. and Mulvihill, D. M. (2021) Enhancing strength and toughness of adhesive joints via micro-structured mechanical interlocking. International Journal of Adhesion and Adhesives, 105, 102775. (doi: 10.1016/j.ijadhadh.2020.102775)
Xiao, Z. and Harrison, P. (2021) Fabric steering technology for variable stiffness panels: manufacture and mechanical testing. Composites Part B: Engineering, 223, 109105. (doi: 10.1016/j.compositesb.2021.109105)
Nwanoro, K., Harrison, P. and Lennard, F. (2021) Investigating the accuracy of digital image correlation in monitoring strain fields across historical tapestries. Strain, (doi: 10.1111/str.12401) (Early Online Publication)
Harrison, P. and Gonzalez Camacho, L. F. (2021) Deep draw induced wrinkling of engineering fabrics. International Journal of Solids and Structures, 212, pp. 220-236. (doi: 10.1016/j.ijsolstr.2020.12.003)
Xiao, Z. and Harrison, P. (2021) Design of buckling and damage resistant steered fibre composite laminates using trellis shear kinematics. Composite Structures, 260, 113526. (doi: 10.1016/j.compstruct.2020.113526)
Lennard, F. , Costantini, R. and Harrison, P. (2021) Investigating Tapestry Conservation and Display with Digital Image Correlation. In: Spring Forum of the ICON Textile Group, 15-20 Apr 2021, pp. 122-132. (Accepted for Publication)
Lennard, F. , Costantini, R. and Harrison, P. (2021) Understanding the role of friction and adhesion in the display of tapestries on slanted supports. Studies in Conservation, 66(1), pp. 32-43. (doi: 10.1080/00393630.2020.1761184)
Kazaz, O., Karimi, N. , Falcone, G. , Kumar, S. and Paul, M. C. (2021) Effect of Radiative Heat Transfer in Nanofluid for Volumetric Solar Collector. In: 13th International Conference on Applied Energy (ICAE2021), 29 Nov - 2 Dec 2021, (Accepted for Publication)
Kavitha, T. and Kumar, S. (2021) Multifunctionalities enabled by the synergistic effects of mesoporous carbon dots and ZnO nanorods. Materials Research Express, 8(11), 115504. (doi: 10.1088/2053-1591/abe36f)
Andrew, J. J., Alhashmi, H., Schiffer, A., Kumar, S. and Deshpande, V. S. (2021) Energy absorption and self-sensing performance of 3D printed CF/PEEK cellular composites. Materials and Design, 208, 109863. (doi: 10.1016/j.matdes.2021.109863)
Alam, F., Verma, P., Mohammad, W., Teo, J., Varadarajan, K.M. and Kumar, S. (2021) Architected poly(lactic acid)/poly(ε-caprolactone)/halloysite nanotube composite scaffolds enabled by 3D printing for biomedical applications. Journal of Materials Science, 56(25), pp. 14070-14083. (doi: 10.1007/s10853-021-06145-0)
Gupta, V., Alam, F., Verma, P., Kannan, A.M. and Kumar, S. (2021) Additive manufacturing enabled, microarchitected, hierarchically porous polylactic-acid/Lithium iron phosphate/carbon nanotube nanocomposite electrodes for high performance Li-Ion batteries. Journal of Power Sources, 494, 229625. (doi: 10.1016/j.jpowsour.2021.229625)
Verma, P., Bansala, T., Chauhan, S. S., Kumar, D., Deveci, S. and Kumar, S. (2021) Electromagnetic interference shielding performance of carbon nanostructure reinforced, 3D printed polymer composites. Journal of Materials Science, 56, pp. 11769-11788.(doi: 10.1007/s10853-021-05985-0)
Jefferson Andrew, J., Verma, P. and Kumar, S. (2021) Impact behavior of nanoengineered, 3D printed plate-lattices. Materials and Design, 202, 109516. (doi: 10.1016/j.matdes.2021.109516)
J, J. A., Schneider, J., Ubaid, J., Velmurugan, R., Gupta, N.K. and Kumar, S. (2021) Energy absorption characteristics of additively manufactured plate-lattices under low- velocity impact loading. International Journal of Impact Engineering, 149, 103768.(doi: 10.1016/j.ijimpeng.2020.103768)
Verma, P., Ubaid, J., Schiffer, A., Jain, A., Martínez-Pañeda, E. and Kumar, S. (2021) Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing. International Journal of Advanced Manufacturing Technology, 113(3-4), pp. 771-784. (doi: 10.1007/s00170-020-06580-4)
Dixit, T., Nithiarasu, P. and Kumar, S. (2021) Numerical evaluation of additively manufactured lattice architectures for heat sink applications. International Journal of Thermal Sciences, 159, 106607. (doi: 10.1016/j.ijthermalsci.2020.106607)
Verma, P., Schiffer, A. and Kumar, S. (2021) Thermo-resistive and thermo-piezoresistive sensitivity of carbon nanostructure engineered thermoplastic composites processed via additive manufacturing. Polymer Testing, 93, 106961. (doi: 10.1016/j.polymertesting.2020.106961)
Budarapu, P.R., Thakur, S., Kumar, S. and Paggi, M. (2021) Micromechanics of engineered interphases in nacre-like composite structures. Mechanics of Advanced Materials and Structures, 28(22), pp. 2327-2342. (doi: 10.1080/15376494.2020.1733714)
Damiati, L. A. et al. (2021) Materials-driven fibronectin assembly on nanoscale topography enhances mesenchymal stem cell adhesion, protecting cells from bacterial virulence factors and preventing biofilm formation. Biomaterials, (doi: 10.1016/j.biomaterials.2021.121263) (In Press)
Povall, T.M., Govender, I. and McBride, A.T. (2021) Dense granular flows in rotating drums: a computational investigation of constitutive equations. Powder Technology, 393, pp. 238-249. (doi: 10.1016/j.powtec.2021.07.051)
Steinmann, P. , Smith, A., Birang, E., McBride, A. and Javili, A. (2021) Atomistic two-, three- and four-body potentials. Spatial and material settings. Journal of the Mechanics and Physics of Solids, 154, 104507. (doi: 10.1016/j.jmps.2021.104507)
Javili, A., McBride, A.T. , Mergheim, J. and Steinmann, P. (2021) Towards elasto-plastic continuum-kinematics-inspired peridynamics. Computer Methods in Applied Mechanics and Engineering, 380, 113809. (doi: 10.1016/j.cma.2021.113809)
Liu, Z. , McBride, A. , Sharma, B. L., Steinmann, P. and Saxena, P. (2021) Coupled electro-elastic deformation and instabilities of a toroidal membrane. Journal of the Mechanics and Physics of Solids, 151, 104221. (doi: 10.1016/j.jmps.2020.104221)
Javili, A., McBride, A. T. and Steinmann, P. (2021) A geometrically exact formulation of peridynamics. Theoretical and Applied Fracture Mechanics, 111, 102850. (doi: 10.1016/j.tafmec.2020.102850)
Min, G., Pullanchiyodan, A., Dahiya, A. S., Hosseini, E. S., Xu, Y. , Mulvihill, D. M. and Dahiya, R. (2021) Ferroelectric-assisted high-performance triboelectric nanogenerators based on electrospun P(VDF-TrFE) composite nanofibers with barium titanate nanofillers. Nano Energy, 90(Part A), 106600. (doi: 10.1016/j.nanoen.2021.106600)
Perris, J., Xu, Y. , Kartal, M. E., Gadegaard, N. and Mulvihill, D. M. (2021) Tailorable and repeatable normal contact stiffness via micropatterned interfaces. Tribology Letters, 69, 106. (doi: 10.1007/s11249-021-01473-3)
Min, G., Xu, Y. , Cochran, P., Gadegaard, N. , Mulvihill, D. M. and Dahiya, R. (2021) Origin of the contact force-dependent response of triboelectric nanogenerators. Nano Energy, 83, 105829. (doi: 10.1016/j.nanoen.2021.105829)
Sneddon, S., Xu, Y. , Dixon, M., Rugg, D., Li, P. and Mulvihill, D. M. (2021) Sensitivity of material failure to surface roughness: a study on titanium alloys Ti64 and Ti407. Materials and Design, 200, 109438. (doi: 10.1016/j.matdes.2020.109438)
Sneddon, S., Mulvihill, D. M. , Wielewski, E. , Dixon, M., Rugg, D. and Li, P. (2021) Deformation and failure behaviour of a titanium alloy Ti-407 with reduced aluminium content: a comparison with Ti-6Al-4V in tension and compression. Materials Characterization, 172, 110901. (doi: 10.1016/j.matchar.2021.110901)
Ghasemi, A. R., Heidari-Rarani, M., Heidari-Sheibani, B. and Tabatabaeian, A. (2021) Free transverse vibration analysis of laminated composite beams with arbitrary number of concentrated masses. Archive of Applied Mechanics, 91(6), pp. 2393-2402. (doi: 10.1007/s00419-021-01924-2)
Muthu, M., Yang, E.-H. and Unluer, C. (2021) Effect of graphene oxide on the deterioration of cement pastes exposed to citric and sulfuric acids. Cement and Concrete Composites, 124, 104252. (doi: 10.1016/j.cemconcomp.2021.104252)
Peng, Y., Ma, K., Unluer, C. , Li, W., Li, S., Shi, J. and Long, G. (2021) Method for calculating dynamic yield stress of fresh cement pastes using a coaxial cylinder system. Journal of the American Ceramic Society, 104(11), pp. 5557-5570. (doi: 10.1111/jace.17979)
Peng, Y. M., Unluer, C. and Shi, J.Y. (2021) Rheo-viscoelastic behavior and viscosity prediction of calcium sulphoaluminate modified Portland cement pastes. Powder Technology, 391, pp. 344-352. (doi: 10.1016/j.powtec.2021.06.023)
Dung, N.T. and Unluer, C. (2021) Advances in the hydration of reactive MgO cement blends incorporating different magnesium carbonates. Construction and Building Materials, 294, 123573. (doi: 10.1016/j.conbuildmat.2021.123573)
Hay, R., Dung, N.T., Lesimple, A., Unluer, C. and Celik, K. (2021) Mechanical and microstructural changes in reactive magnesium oxide cement-based concrete mixes subjected to high temperatures. Cement and Concrete Composites, 118, 103955. (doi: 10.1016/j.cemconcomp.2021.103955)
Sonat, C., He, S., Li, J., Unluer, C. and Yang, E.-H. (2021) Strain hardening magnesium-silicate-hydrate composites (SHMSHC) reinforced with short and randomly oriented polyvinyl alcohol microfibers. Cement and Concrete Research, 142, 106354. (doi: 10.1016/j.cemconres.2021.106354)
Yang, Y., Ruan, S., Wu, S., Chu, J., Unluer, C. , Liu, H. and Cheng, L. (2021) Biocarbonation of reactive magnesia for soil improvement. Acta Geotechnica, 16(4), pp. 1113-1125. (doi: 10.1007/s11440-020-01093-6)
Muthu, M., Yang, E.-H. and Unluer, C. (2021) Resistance of graphene oxide-modified cement pastes to hydrochloric acid attack. Construction and Building Materials, 273, 121990. (doi: 10.1016/j.conbuildmat.2020.121990)
Panda, B., Sonat, C., Yang, E.-H., Tan, M. J. and Unluer, C. (2021) Use of magnesium-silicate-hydrate (M-S-H) cement mixes in 3D printing applications. Cement and Concrete Composites, 117, 103901. (doi: 10.1016/j.cemconcomp.2020.103901)
Yu, H., Yi, Y. and Unluer, C. (2021) Heat of hydration, bleeding, viscosity, setting of Ca(OH)2-GGBS and MgO-GGBS grouts. Construction and Building Materials, 270, 121839. (doi: 10.1016/j.conbuildmat.2020.121839)
Ruan, S., Qiu, J., Yang, E.-H. and Unluer, C. (2021) Influence of crack width on the stiffness recovery and self-healing of reactive magnesia-based binders under CO2-H2O conditioning. Construction and Building Materials, 269, 121360. (doi: 10.1016/j.conbuildmat.2020.121360)
Ruan, S., Yang, E.-H. and Unluer, C. (2021) Production of reactive magnesia from desalination reject brine and its use as a binder. Journal of CO2 Utilization, 44, 101383. (doi: 10.1016/j.jcou.2020.101383)
Xiao, X., Goh, L. X., Unluer, C. and Yang, E.-H. (2021) Bacteria-induced internal carbonation of reactive magnesia cement. Construction and Building Materials, 267, 121748. (doi: 10.1016/j.conbuildmat.2020.121748)
Dung, N.T., Hay, R., Lesimple, A., Celik, K. and Unluer, C. (2021) Influence of CO2 concentration on the performance of MgO cement mixes. Cement and Concrete Composites, 115, 103826. (doi: 10.1016/j.cemconcomp.2020.103826)
Dung, N.T., Hooper, T.J.N. and Unluer, C. (2021) Improving the carbonation resistance of Na2CO3-activated slag mixes via the use of reactive MgO and nucleation seeding. Cement and Concrete Composites, 115, 103832. (doi: 10.1016/j.cemconcomp.2020.103832)
Maier, M., Salazar, B., Unluer, C. , Taylor, H. K. and Ostertag, C. P. (2021) Thermal and mechanical performance of a novel 3D printed macro-encapsulation method for phase change materials. Journal of Building Engineering, 43, 103124. (doi: 10.1016/j.jobe.2021.103124)
Priyadarshi, A., Khavari, M., Bin Shahrani, S., Subroto, T., Yusuf, L. A., Conte, M., Prentice, P. , Pericleous, K., Eskin, D. and Tzanakis, I. (2021) In-situ observations and acoustic measurements upon fragmentation of free-floating intermetallics under ultrasonic cavitation in water. Ultrasonics Sonochemistry, 80, 105820. (doi: 10.1016/j.ultsonch.2021.105820)
Yusuf, L., Symes, M. D. and Prentice, P. (2021) Characterising the cavitation activity generated by an ultrasonic horn at varying tip-vibration amplitudes. Ultrasonics Sonochemistry, 70, 105273. (doi: 10.1016/j.ultsonch.2020.105273) (PMID:32795929)
2020
Barbera, D. and Haofeng, C. (2020) On the plastic strain accumulation in notched bars during high-temperature creep dwell. Journal of Mechanics, 36(2), pp. 167-176. (doi: 10.1017/jmech.2019.56)
Kang, L., Feeney, A. and Dixon, S. (2020) The high frequency flexural ultrasonic transducer for transmitting and receiving ultrasound in air. IEEE Sensors Journal, 20(14), pp. 7653-7660. (doi: 10.1109/JSEN.2020.2981667)
Feeney, A. , Kang, L., Somerset, W. E. and Dixon, S. (2020) Venting in the comparative study of flexural ultrasonic transducers to improve resilience at elevated environmental pressure levels. IEEE Sensors Journal, 20(11), pp. 5776-5784. (doi: 10.1109/jsen.2020.2974547)
Ali, H. T., Akrami, R., Fotouhi, S., Bodaghi, M., Saeedifar, M., Yusuff, M. and Fotouhi, M. (2020) Fiber reinforced polymer composites in bridge industry: a review. Structures, (Accepted for Publication)
Fotouhi, S., Khoshravan Azar, M. R. and Fotouhi, M. (2020) Damage Characterization of Scaled Laminated Composites under Indentation by Acoustic Emission. ICCS24 - 24th International Conference on Composite Structures, Porto, Portugal, 14-18 Jun 2021. (Accepted for Publication)
de Castro, B. D., Fotouhi, M. , Vieira, L. M. G., de Faria, P. E. and Campos Rubio, J. C. (2020) Mechanical behaviour of a green composite from biopolymers reinforced with sisal fibres. Journal of Polymers and the Environment, (doi: 10.1007/s10924-020-01875-9) (Early Online Publication)
Pozegic, T. R., Fotouhi, M. , Wu, X., Hartley, J. W., Wisnom, M. R. and Hamerton, I. (2020) Pseudo-ductile behaviour in fibre reinforced thermoplastic angle-ply composites. Composites Science and Technology, 197, 108261. (doi: 10.1016/j.compscitech.2020.108261)
Fotouhi, M. , Jalalvand, M., Saeedifar, M., Xiao, B. and Wisnom, M. R. (2020) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour loaded off-axis. Composite Structures, 247, 112444.
Fotouhi, M. , Damghani, M., Leong, M. C., Fotouhi, S., Jalalvand, M. and Wisnom, M. R. (2020) A comparative study on glass and carbon fibre reinforced laminated composites in scaled quasi-static indentation tests. Composite Structures, 245, 112327. (doi: 10.1016/j.compstruct.2020.112327)
Amir, B., Fotouhi, M. and William, M. (2020) A new design for friction stir spot joining of Al alloys and carbon fibre reinforced composites. Journal of Materials Engineering and Performance, 29, pp. 4913-4921. (doi: 10.1007/s11665-020-04998-1)
Fotouhi, M. , Abazari, A.-M., Ajaj, A. M., Akrami, R., Fotouhi, S. and Ali, H. T. (2020) Topology Optimisation of a Wing Box Rib Using Ansys. 28th Annual International Conference of the Iranian Society of Mechanical Engineers (ISME2020), Tehran, Iran, 27-29 May 2020.
Bodaghi, M., Serjouei, A., Zolfagharian, A., Fotouhi, M. , Hafizur, R. and Durand, D. (2020) Reversible energy absorbing meta-sandwiches by 4D FDM printing. International Journal of Mechanical Sciences, 173, 105451. (doi: 10.1016/j.ijmecsci.2020.105451)
Noroozi, R., Bodaghi, M., Jafari, H., Zolfagharian, A. and Fotouhi, M. (2020) Shape-adaptive metastructures with variable bandgap regions by 4D printing. Polymers, 12(3), 519. (doi: 10.3390/polym12030519)
Ali, H. T., Fotouhi, S., Akrami, R., Pashmforoush, F., Pavlovic, A. and Fotouhi, M. (2020) Effect of ply thickness on damage mechanisms of composite laminates under repeated loading. FME Transactions, 48(2), pp. 287-293. (doi: 10.5937/fme2002287T)
Abazari, A. M., Fotouhi, M. , Tavakkoli, H. and Rezazadeh, G. (2020) An experimental study for characterization of size-dependence in microstructures via electrostatic pull-in instability technique. Applied Physics Letters, 116, 244102. (doi: 10.1063/5.0011335)
Ali, H. T., Akrami, R., Fotouhi, S., Pashmforoush, F., Fragassa, C. and Fotouhi, M. (2020) Effect of the stacking sequence on the impact response of carbon-glass/epoxy hybrid composites. Facta Universitatis, Series: Mechanical Engineering, 18(1), pp. 69-77.(doi: 10.22190/FUME191119010A)
MacLaren, I. et al. (2020) A comparison of a direct electron detector and a high-speed video camera for a scanning precession electron diffraction phase and orientation mapping. Microscopy and Microanalysis, 26(6), pp. 1110-1116. (doi: 10.1017/S1431927620024411) (PMID:32867871)
Leppänen, J., Johansson, M. and Grassl, P. (2020) On the dynamic response of reinforced concrete beams subjected to drop weight impact. Finite Elements in Analysis and Design, 180, 103438. (doi: 10.1016/j.finel.2020.103438)
Sciegaj, A., Grassl, P. , Larsson, F., Runesson, K. and Lundgren, K. (2020) Upscaling of three-dimensional reinforced concrete representative volume elements to effective beam and plate models. International Journal of Solids and Structures, 202, pp. 835-853. (doi: 10.1016/j.ijsolstr.2020.07.006)
Harrison, P. , Campbell, I., Guliyev, E., McLelland, B., Gomes, R., Curado-Correia, N., McGookin, E. and Mulvihill, D.M. (2020) Induction melt thermoforming of advanced multi-axial thermoplastic composite laminates. Journal of Manufacturing Processes, 60, pp. 673-683. (doi: 10.1016/j.jmapro.2020.10.026)
Costantini, R., Lennard, F. , Alsayednoor, J. and Harrison, P. (2020) Investigating mechanical damage mechanisms of tapestries displayed at different angles using 2D DIC. European Physical Journal Plus, 135, 515. (doi: 10.1140/epjp/s13360-020-00520-7)
Verma, P., Schiffer, A. and Kumar, S. (2020) Thermo-resistive and thermo-piezoresistive sensitivity of carbon nanostructure engineered thermoplastic composites processed via additive manufacturing. Polymer Testing, (doi: 10.1016/j.polymertesting.2020.106961) (In Press)
Alam, F., Varadarajan, K. M., Koo, J. H., Wardle, B. L. and Kumar, S. (2020) Additively manufactured polyetheretherketone (PEEK) with carbon nanostructure reinforcement for biomedical structural applications. Advanced Engineering Materials, 22(10), 2000483. (doi: 10.1002/adem.202000483)
Saab, R., Polychronopoulou, K., Zheng, L., Kumar, S. and Schiffer, A. (2020) Synthesis and performance evaluation of hydrocracking catalysts: a review. Journal of Industrial and Engineering Chemistry, 89, pp. 83-103. (doi: 10.1016/j.jiec.2020.06.022)
Gupta, V., Kannan, A.M. and Kumar, S. (2020) Graphene Foam (GF)/Manganese Oxide (MnO2) nanocomposites for high performance supercapacitors. Journal of Energy Storage, 30, 101575. (doi: 10.1016/j.est.2020.101575)
Ubaid, J., Wardle, B. L. and Kumar, S. (2020) Bioinspired compliance grading motif of mortar in nacreous materials. ACS Applied Materials and Interfaces, 12(29), pp. 33256-33266. (doi: 10.1021/acsami.0c08181)
Budarapu, P.R., Thakur, S., Kumar, S. and Paggi, M. (2020) Micromechanics of engineered interphases in nacre-like composite structures. Mechanics of Advanced Materials and Structures, (doi: 10.1080/15376494.2020.1733714) (Early Online Publication)
Arif, M.F., Alhashmi, H., Varadarajan, K.M., Koo, J. H., Hart, A.J. and Kumar, S. (2020) Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing. Composites Part B: Engineering, 184, 107625. (doi:
10.1016/j.compositesb.2019.107625)
Alam, F., Shukla, V. R., Varadarajan, K.M. and Kumar, S. (2020) Microarchitected 3D printed polylactic acid (PLA) nanocomposite scaffolds for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials, 103, 103576. (doi: 10.1016/j.jmbbm.2019.103576) (PMID:32090905)
Upadhyaya, P., Kumar, S., Reddy, J. and Lacy Jr., T. E. (2020) Multiscale modeling of strength and failure behavior of carbon nanostructure reinforced epoxy composite adhesives in bonded systems. European Journal of Mechanics - A/Solids, 80, 103932.(doi: 10.1016/j.euromechsol.2019.103932)
Mora, A., Verma, P. and Kumar, S. (2020) Electrical conductivity of CNT/polymer composites: 3D printing, measurements and modeling. Composites Part B: Engineering, 183, 107600. (doi: 10.1016/j.compositesb.2019.107600)
Alam, F., Varadarajan, K.M. and Kumar, S. (2020) 3D printed polylactic acid nanocomposite scaffolds for tissue engineering applications. Polymer Testing, 81, 106203. (doi: 10.1016/j.polymertesting.2019.106203)
Kumar, S. (2020) Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing. International Journal of Advanced Manufacturing Technology, (Accepted for Publication)
Lee, H.S. J. and York, C. B. (2020) Compression and shear buckling performance of finite length plates with bending-twisting coupling. Composite Structures, 241, 112069. (doi: 10.1016/j.compstruct.2020.112069)
Liu, G., Song, W. and Li, P. (2020) Compressive mechanical properties of metal fiber sintered sheets at different strain rates. Composite Structures, 233, 111703. (doi:10.1016/j.compstruct.2019.111703)
Wang, Z. and Li, P. (2020) Visco‐elasto‐plastic constitutive model of adhesives under uniaxial compression in a range of strain rates. Journal of Applied Polymer Science, (doi:10.1002/app.48962) (Early Online Publication)
Wang, Z. and Li, P. (2020) A model incorporating damage evolution to predict the penetration behaviour of a ceramic target subjected to the long projectile impact. International Journal of Impact Engineering, 135, 103393.(doi:10.1016/j.ijimpeng.2019.103393)
Yang, J. and Liu, Y. (2020) Energy, time and material consumption modelling for fused deposition modelling process. Procedia CIRP, 90, pp. 510-515. (doi: 10.1016/j.procir.2020.02.130)
McBride, A. , Davydov, D. and Steinmann, P. (2020) Modelling the flexoelectric effect in solids: a micromorphic approach. Computer Methods in Applied Mechanics and Engineering, 371, 113320. (doi: 10.1016/j.cma.2020.113320)
Grieshaber, B. J., McBride, A. T. and Reddy, B. D. (2020) Convergence in the incompressible limit of new discontinuous Galerkin methods with general quadrilateral and hexahedral elements. Computer Methods in Applied Mechanics and Engineering, 370, 113233. (doi: 10.1016/j.cma.2020.113233)
Javilia, A., Firooza, S., McBride, A.T. and Steinmann, P. (2020) The computational framework for continuum-kinematics-inspired peridynamics. Computational Mechanics, 66(4), pp. 795-824. (doi: 10.1007/s00466-020-01885-3)
Liu, Z. , McBride, A. , Saxena, P. and Steinmann, P. (2020) Assessment of an isogeometric approach with Catmull-Clark subdivision surfaces using the Laplace-Beltrami problems. Computational Mechanics, 66, pp. 851-876. (doi: 10.1007/s00466-020-01877-3)
Xu, Y. , Min, G., Gadegaard, N. , Dahiya, R. and Mulvihill, D. M. (2020) A unified contact force-dependent model for triboelectric nanogenerators accounting for surface roughness. Nano Energy, 76, 105067. (doi: 10.1016/j.nanoen.2020.105067)
Min, G., Manjakkal, L. , Mulvihill, D. M. and Dahiya, R. S. (2020) Triboelectric nanogenerator with enhanced performance via an optimized low permittivity substrate. IEEE Sensors Journal, 20(13), pp. 6856-6862. (doi: 10.1109/JSEN.2019.2938605)
Hastie, J. C., Kartal, M. E., Carter, L. N., Attallah, M. M. and Mulvihill, D. (2020) Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: influence of processing parameters and heat treatment. Materials Characterization, 163, 110225. (doi: 10.1016/j.matchar.2020.110225)
Schneider, J. and Kumar, S. (2020) Multiscale characterization and constitutive parameters identification of polyamide (PA12) processed via selective laser sintering. Polymer Testing, 86, 106357. (doi: 10.1016/j.polymertesting.2020.106357)
Dung, N.T., Hooper, T.J.N. and Unluer, C. (2020) Enhancing the performance of MgO-activated slag-fly ash mixes by accelerated carbonation. Journal of CO2 Utilization, 42, 101356. (doi: 10.1016/j.jcou.2020.101356)
Ruan, S., Zhu, W., Yang, E.-H., Weng, Y. and Unluer, C. (2020) Improvement of the performance and microstructural development of alkali-activated slag blends. Construction and Building Materials, 261, 120017. (doi: 10.1016/j.conbuildmat.2020.120017)
Pu, L. and Unluer, C. (2020) Effect of preconditioning on carbonated reactive MgO-based concrete samples. Journal of Materials in Civil Engineering, 32(11), 04020314. (doi: 10.1061/(ASCE)MT.1943-5533.0003416)
Soderbreg Yibirin, C. and Unluer, C. (2020) 3D Printed Carbon Cladding. AIA/ACSA Intersections Research Conference 2020, Virtual Conference, 30 Sept - 2 Oct 2020. (Accepted for Publication)
Maier, M., Javadian, A., Saeidi, N., Unluer, C. , Taylor, H. K. and Ostertag, C. P. (2020) Mechanical properties and flexural behavior of sustainable bamboo fiber-reinforced mortar. Applied Sciences, 10(18), 6587. (doi: 10.3390/app10186587)
Panda, B., Ruan, S., Unluer, C. and Tan, M. J. (2020) Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing. Composites Part B: Engineering, 186, 107826. (doi: 10.1016/j.compositesb.2020.107826)
Dung, N. T. and Unluer, C. (2020) Influence of accelerated hydration and carbonation on the performance of reactive magnesium oxide concrete. Advances in Cement Research, 32(2), pp. 78-90. (doi: 10.1680/jadcr.17.00186)
Muthu, M., Kumar, E.-H., Yang, C. and Unluer, C. (2020) Degradation of carbonated reactive MgO-based concrete exposed to nitric acid. Journal of CO2 Utilization, 36, pp. 210-219. (doi: 10.1016/j.jcou.2019.11.006)
Kumar, S., Sonat, C., Yang, E.-H. and Unluer, C. (2020) Performance of reactive magnesia cement formulations containing fly ash and ground granulated blast-furnace slag. Construction and Building Materials, 232, 117275. (doi: 10.1016/j.conbuildmat.2019.117275)
Bhagath Singh, G.V.P., Sonat, C., Yang, E.H. and Unluer, C. (2020) Performance of MgO and MgO–SiO2 systems containing seeds under different curing conditions. Cement and Concrete Composites, 108, 103543. (doi: 10.1016/j.cemconcomp.2020.103543)
Kang, L., Feeney, A. and Dixon, S. (2020) The high frequency flexural ultrasonic transducer for transmitting and receiving ultrasound in air. IEEE Sensors Journal, 20(14), pp. 7653-7660. (doi: 10.1109/JSEN.2020.2981667)
Feeney, A. , Kang, L., Somerset, W. E. and Dixon, S. (2020) Venting in the comparative study of flexural ultrasonic transducers to improve resilience at elevated environmental pressure levels. IEEE Sensors Journal, 20(11), pp. 5776-5784. (doi: 10.1109/jsen.2020.2974547)
Ali, H. T., Akrami, R., Fotouhi, S., Bodaghi, M., Saeedifar, M., Yusuff, M. and Fotouhi, M. (2020) Fiber reinforced polymer composites in bridge industry: a review. Structures, (Accepted for Publication)
Fotouhi, S., Khoshravan Azar, M. R. and Fotouhi, M. (2020) Damage Characterization of Scaled Laminated Composites under Indentation by Acoustic Emission. ICCS24 - 24th International Conference on Composite Structures, Porto, Portugal, 14-18 Jun 2021. (Accepted for Publication)
de Castro, B. D., Fotouhi, M. , Vieira, L. M. G., de Faria, P. E. and Campos Rubio, J. C. (2020) Mechanical behaviour of a green composite from biopolymers reinforced with sisal fibres. Journal of Polymers and the Environment, (doi: 10.1007/s10924-020-01875-9) (Early Online Publication)
Pozegic, T. R., Fotouhi, M. , Wu, X., Hartley, J. W., Wisnom, M. R. and Hamerton, I. (2020) Pseudo-ductile behaviour in fibre reinforced thermoplastic angle-ply composites. Composites Science and Technology, 197, 108261. (doi: 10.1016/j.compscitech.2020.108261)
Fotouhi, M. , Jalalvand, M., Saeedifar, M., Xiao, B. and Wisnom, M. R. (2020) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour loaded off-axis. Composite Structures, 247, 112444.
Fotouhi, M. , Damghani, M., Leong, M. C., Fotouhi, S., Jalalvand, M. and Wisnom, M. R. (2020) A comparative study on glass and carbon fibre reinforced laminated composites in scaled quasi-static indentation tests. Composite Structures, 245, 112327. (doi: 10.1016/j.compstruct.2020.112327)
Amir, B., Fotouhi, M. and William, M. (2020) A new design for friction stir spot joining of Al alloys and carbon fibre reinforced composites. Journal of Materials Engineering and Performance, 29, pp. 4913-4921. (doi: 10.1007/s11665-020-04998-1)
Fotouhi, M. , Abazari, A.-M., Ajaj, A. M., Akrami, R., Fotouhi, S. and Ali, H. T. (2020) Topology Optimisation of a Wing Box Rib Using Ansys. 28th Annual International Conference of the Iranian Society of Mechanical Engineers (ISME2020), Tehran, Iran, 27-29 May 2020.
Bodaghi, M., Serjouei, A., Zolfagharian, A., Fotouhi, M. , Hafizur, R. and Durand, D. (2020) Reversible energy absorbing meta-sandwiches by 4D FDM printing. International Journal of Mechanical Sciences, 173, 105451. (doi: 10.1016/j.ijmecsci.2020.105451)
Noroozi, R., Bodaghi, M., Jafari, H., Zolfagharian, A. and Fotouhi, M. (2020) Shape-adaptive metastructures with variable bandgap regions by 4D printing. Polymers, 12(3), 519. (doi: 10.3390/polym12030519)
Ali, H. T., Fotouhi, S., Akrami, R., Pashmforoush, F., Pavlovic, A. and Fotouhi, M. (2020) Effect of ply thickness on damage mechanisms of composite laminates under repeated loading. FME Transactions, 48(2), pp. 287-293. (doi: 10.5937/fme2002287T)
Abazari, A. M., Fotouhi, M. , Tavakkoli, H. and Rezazadeh, G. (2020) An experimental study for characterization of size-dependence in microstructures via electrostatic pull-in instability technique. Applied Physics Letters, 116, 244102. (doi: 10.1063/5.0011335)
Ali, H. T., Akrami, R., Fotouhi, S., Pashmforoush, F., Fragassa, C. and Fotouhi, M. (2020) Effect of the stacking sequence on the impact response of carbon-glass/epoxy hybrid composites. Facta Universitatis, Series: Mechanical Engineering, 18(1), pp. 69-77.(doi: 10.22190/FUME191119010A)
MacLaren, I. et al. (2020) A comparison of a direct electron detector and a high-speed video camera for a scanning precession electron diffraction phase and orientation mapping. Microscopy and Microanalysis, 26(6), pp. 1110-1116. (doi: 10.1017/S1431927620024411) (PMID:32867871)
Leppänen, J., Johansson, M. and Grassl, P. (2020) On the dynamic response of reinforced concrete beams subjected to drop weight impact. Finite Elements in Analysis and Design, 180, 103438. (doi: 10.1016/j.finel.2020.103438)
Sciegaj, A., Grassl, P. , Larsson, F., Runesson, K. and Lundgren, K. (2020) Upscaling of three-dimensional reinforced concrete representative volume elements to effective beam and plate models. International Journal of Solids and Structures, 202, pp. 835-853. (doi: 10.1016/j.ijsolstr.2020.07.006)
Harrison, P. , Campbell, I., Guliyev, E., McLelland, B., Gomes, R., Curado-Correia, N., McGookin, E. and Mulvihill, D.M. (2020) Induction melt thermoforming of advanced multi-axial thermoplastic composite laminates. Journal of Manufacturing Processes, 60, pp. 673-683. (doi: 10.1016/j.jmapro.2020.10.026)
Costantini, R., Lennard, F. , Alsayednoor, J. and Harrison, P. (2020) Investigating mechanical damage mechanisms of tapestries displayed at different angles using 2D DIC. European Physical Journal Plus, 135, 515. (doi: 10.1140/epjp/s13360-020-00520-7)
Verma, P., Schiffer, A. and Kumar, S. (2020) Thermo-resistive and thermo-piezoresistive sensitivity of carbon nanostructure engineered thermoplastic composites processed via additive manufacturing. Polymer Testing, (doi: 10.1016/j.polymertesting.2020.106961) (In Press)
Alam, F., Varadarajan, K. M., Koo, J. H., Wardle, B. L. and Kumar, S. (2020) Additively manufactured polyetheretherketone (PEEK) with carbon nanostructure reinforcement for biomedical structural applications. Advanced Engineering Materials, 22(10), 2000483. (doi: 10.1002/adem.202000483)
Saab, R., Polychronopoulou, K., Zheng, L., Kumar, S. and Schiffer, A. (2020) Synthesis and performance evaluation of hydrocracking catalysts: a review. Journal of Industrial and Engineering Chemistry, 89, pp. 83-103. (doi: 10.1016/j.jiec.2020.06.022)
Gupta, V., Kannan, A.M. and Kumar, S. (2020) Graphene Foam (GF)/Manganese Oxide (MnO2) nanocomposites for high performance supercapacitors. Journal of Energy Storage, 30, 101575. (doi: 10.1016/j.est.2020.101575)
Ubaid, J., Wardle, B. L. and Kumar, S. (2020) Bioinspired compliance grading motif of mortar in nacreous materials. ACS Applied Materials and Interfaces, 12(29), pp. 33256-33266. (doi: 10.1021/acsami.0c08181)
Budarapu, P.R., Thakur, S., Kumar, S. and Paggi, M. (2020) Micromechanics of engineered interphases in nacre-like composite structures. Mechanics of Advanced Materials and Structures, (doi: 10.1080/15376494.2020.1733714) (Early Online Publication)
Arif, M.F., Alhashmi, H., Varadarajan, K.M., Koo, J. H., Hart, A.J. and Kumar, S. (2020) Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing. Composites Part B: Engineering, 184, 107625. (doi:
10.1016/j.compositesb.2019.107625)
Alam, F., Shukla, V. R., Varadarajan, K.M. and Kumar, S. (2020) Microarchitected 3D printed polylactic acid (PLA) nanocomposite scaffolds for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials, 103, 103576. (doi: 10.1016/j.jmbbm.2019.103576) (PMID:32090905)
Upadhyaya, P., Kumar, S., Reddy, J. and Lacy Jr., T. E. (2020) Multiscale modeling of strength and failure behavior of carbon nanostructure reinforced epoxy composite adhesives in bonded systems. European Journal of Mechanics - A/Solids, 80, 103932.(doi: 10.1016/j.euromechsol.2019.103932)
Mora, A., Verma, P. and Kumar, S. (2020) Electrical conductivity of CNT/polymer composites: 3D printing, measurements and modeling. Composites Part B: Engineering, 183, 107600. (doi: 10.1016/j.compositesb.2019.107600)
Alam, F., Varadarajan, K.M. and Kumar, S. (2020) 3D printed polylactic acid nanocomposite scaffolds for tissue engineering applications. Polymer Testing, 81, 106203. (doi: 10.1016/j.polymertesting.2019.106203)
Kumar, S. (2020) Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing. International Journal of Advanced Manufacturing Technology, (Accepted for Publication)
Lee, H.S. J. and York, C. B. (2020) Compression and shear buckling performance of finite length plates with bending-twisting coupling. Composite Structures, 241, 112069. (doi: 10.1016/j.compstruct.2020.112069)
Liu, G., Song, W. and Li, P. (2020) Compressive mechanical properties of metal fiber sintered sheets at different strain rates. Composite Structures, 233, 111703. (doi:10.1016/j.compstruct.2019.111703)
Wang, Z. and Li, P. (2020) Visco‐elasto‐plastic constitutive model of adhesives under uniaxial compression in a range of strain rates. Journal of Applied Polymer Science, (doi:10.1002/app.48962) (Early Online Publication)
Wang, Z. and Li, P. (2020) A model incorporating damage evolution to predict the penetration behaviour of a ceramic target subjected to the long projectile impact. International Journal of Impact Engineering, 135, 103393.(doi:10.1016/j.ijimpeng.2019.103393)
Yang, J. and Liu, Y. (2020) Energy, time and material consumption modelling for fused deposition modelling process. Procedia CIRP, 90, pp. 510-515. (doi: 10.1016/j.procir.2020.02.130)
McBride, A. , Davydov, D. and Steinmann, P. (2020) Modelling the flexoelectric effect in solids: a micromorphic approach. Computer Methods in Applied Mechanics and Engineering, 371, 113320. (doi: 10.1016/j.cma.2020.113320)
Grieshaber, B. J., McBride, A. T. and Reddy, B. D. (2020) Convergence in the incompressible limit of new discontinuous Galerkin methods with general quadrilateral and hexahedral elements. Computer Methods in Applied Mechanics and Engineering, 370, 113233. (doi: 10.1016/j.cma.2020.113233)
Javilia, A., Firooza, S., McBride, A.T. and Steinmann, P. (2020) The computational framework for continuum-kinematics-inspired peridynamics. Computational Mechanics, 66(4), pp. 795-824. (doi: 10.1007/s00466-020-01885-3)
Liu, Z. , McBride, A. , Saxena, P. and Steinmann, P. (2020) Assessment of an isogeometric approach with Catmull-Clark subdivision surfaces using the Laplace-Beltrami problems. Computational Mechanics, 66, pp. 851-876. (doi: 10.1007/s00466-020-01877-3)
Xu, Y. , Min, G., Gadegaard, N. , Dahiya, R. and Mulvihill, D. M. (2020) A unified contact force-dependent model for triboelectric nanogenerators accounting for surface roughness. Nano Energy, 76, 105067. (doi: 10.1016/j.nanoen.2020.105067)
Min, G., Manjakkal, L. , Mulvihill, D. M. and Dahiya, R. S. (2020) Triboelectric nanogenerator with enhanced performance via an optimized low permittivity substrate. IEEE Sensors Journal, 20(13), pp. 6856-6862. (doi: 10.1109/JSEN.2019.2938605)
Hastie, J. C., Kartal, M. E., Carter, L. N., Attallah, M. M. and Mulvihill, D. (2020) Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: influence of processing parameters and heat treatment. Materials Characterization, 163, 110225. (doi: 10.1016/j.matchar.2020.110225)
Schneider, J. and Kumar, S. (2020) Multiscale characterization and constitutive parameters identification of polyamide (PA12) processed via selective laser sintering. Polymer Testing, 86, 106357. (doi: 10.1016/j.polymertesting.2020.106357)
Dung, N.T., Hooper, T.J.N. and Unluer, C. (2020) Enhancing the performance of MgO-activated slag-fly ash mixes by accelerated carbonation. Journal of CO2 Utilization, 42, 101356. (doi: 10.1016/j.jcou.2020.101356)
Ruan, S., Zhu, W., Yang, E.-H., Weng, Y. and Unluer, C. (2020) Improvement of the performance and microstructural development of alkali-activated slag blends. Construction and Building Materials, 261, 120017. (doi: 10.1016/j.conbuildmat.2020.120017)
Pu, L. and Unluer, C. (2020) Effect of preconditioning on carbonated reactive MgO-based concrete samples. Journal of Materials in Civil Engineering, 32(11), 04020314. (doi: 10.1061/(ASCE)MT.1943-5533.0003416)
Soderbreg Yibirin, C. and Unluer, C. (2020) 3D Printed Carbon Cladding. AIA/ACSA Intersections Research Conference 2020, Virtual Conference, 30 Sept - 2 Oct 2020. (Accepted for Publication)
Maier, M., Javadian, A., Saeidi, N., Unluer, C. , Taylor, H. K. and Ostertag, C. P. (2020) Mechanical properties and flexural behavior of sustainable bamboo fiber-reinforced mortar. Applied Sciences, 10(18), 6587. (doi: 10.3390/app10186587)
Panda, B., Ruan, S., Unluer, C. and Tan, M. J. (2020) Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing. Composites Part B: Engineering, 186, 107826. (doi: 10.1016/j.compositesb.2020.107826)
Dung, N. T. and Unluer, C. (2020) Influence of accelerated hydration and carbonation on the performance of reactive magnesium oxide concrete. Advances in Cement Research, 32(2), pp. 78-90. (doi: 10.1680/jadcr.17.00186)
Muthu, M., Kumar, E.-H., Yang, C. and Unluer, C. (2020) Degradation of carbonated reactive MgO-based concrete exposed to nitric acid. Journal of CO2 Utilization, 36, pp. 210-219. (doi: 10.1016/j.jcou.2019.11.006)
Kumar, S., Sonat, C., Yang, E.-H. and Unluer, C. (2020) Performance of reactive magnesia cement formulations containing fly ash and ground granulated blast-furnace slag. Construction and Building Materials, 232, 117275. (doi: 10.1016/j.conbuildmat.2019.117275)
Bhagath Singh, G.V.P., Sonat, C., Yang, E.H. and Unluer, C. (2020) Performance of MgO and MgO–SiO2 systems containing seeds under different curing conditions. Cement and Concrete Composites, 108, 103543. (doi: 10.1016/j.cemconcomp.2020.103543)
2019
Giugliano, D., Barbera, D., Chen, H., Cho, N.-K. and Yinghua, L. (2019) Creep-fatigue and cyclically enhanced creep mechanisms in aluminium based metal matrix composites. European Journal of Mechanics - A/Solids, 74, pp. 66-80.(doi:10.1016/j.euromechsol.2018.10.015)
Packham, M. and Barbera, D. (2019) Investigating the effect of creep propertiesn mismatch in very thin pipes within high-temperature facilities. In: Advances in Mechanics of High-Temperature Materials. Series: Advanced structured materials (117). Springer: Cham, Switzerland, pp. 107-130. ISBN 9783030238681 (doi:10.1007/978-3-030-23869-8_6)
Feeney, A. , Kang, L., Somerset, W. E. and Dixon, S. (2019) The influence of air pressure on the dynamics of flexural ultrasonic transducers. Sensors, 19(21), 4710. (doi: 10.3390/s19214710)
Kang, L., Feeney, A. , Su, R., Lines, D., Ramadas, S. N., Rowlands, G. and Dixon, S. (2019) Flow velocity measurement using a spatial averaging method with two-dimensional flexural ultrasonic array technology. Sensors, 19(21), 4786. (doi: 10.3390/s19214786)
Feeney, A. , Kang, L., Rowlands, G. and Dixon, S. (2019) The Nonlinear Dynamics of Flexural Ultrasonic Transducers. In: 2019 International Congress on Ultrasonics, Bruges, Belgium, 03-06 Sep 2019, 045015. (doi:10.1121/2.0001095)
Feeney, A. , Kang, L., Somerset, W. E. and Dixon, S. (2019) Measurement Using Flexural Ultrasonic Transducers in High Pressure Environments. In: 2019 International Congress on Ultrasonics, Bruges, Belgium, 03-06 Sep 2019, 045014. (doi:10.1121/2.0001091)
Feeney, A. , Kang, L. and Dixon, S. (2019) Dynamic nonlinearity in piezoelectric flexural ultrasonic transducers. IEEE Sensors Journal, 19(15), pp. 6056-6066. (doi: 10.1109/JSEN.2019.2911158)
Kang, L., Feeney, A. and Dixon, S. (2019) Wideband electromagnetic dynamic acoustic transducers (WEMDATs) for air-coupled ultrasonic applications. Applied Physics Letters, 114(5), 053505. (doi: 10.1063/1.5086383)
Kang, L., Feeney, A. , Somerset, W. and Dixon, S. (2019) Wideband Electromagnetic Dynamic Acoustic Transducer as a Standard Acoustic Source for Air-coupled Ultrasonic Sensors. In: 2019 IEEE International Ultrasonics Symposium (IUS), Glasgow, UK, 06-09 Oct 2019, pp. 2481-2484. ISBN 9781728145969 (doi:10.1109/ULTSYM.2019.8926271)
Kang, L., Feeney, A. , Somerset, W., Su, R., Lines, D., Ramadas, S. N. and Dixon, S. (2019) A Novel Mathematical Model for Transit-time Ultrasonic Flow Measurement. In: 2019 IEEE International Ultrasonics Symposium (IUS), Glasgow, UK, 06-09 Oct 2019, pp. 1590-1593. ISBN 9781728145969 (doi:10.1109/ULTSYM.2019.8925693)
Akrami, R., Fotouhi, S., Fotouhi, M. , Bodaghi, M., Clamp, J. and Bolouri, A. (2019) High-performance bio-inspired composite T-joints. Composites Science and Technology, 184, 107840. (doi: 10.1016/j.compscitech.2019.107840)
Fotouhi, S., Clamp, J., Bolouri, A., Pozegic, T. R. and Fotouhi, M. (2019) Investigating polyethersulfone interleaved glass/carbon hybrid composite under impact and its comparison with GLARE. Composite Structures, 226, 111268. (doi: 10.1016/j.compstruct.2019.111268)
Suresh Kumar, C., Fotouhi, M. , Saeedifar, M. and Arumugam, V. (2019) Acoustic emission based investigation on the effect of temperature and hybridization on drop weight impact and post-impact residual strength of hemp and basalt fibres reinforced polymer composite laminates. Composites Part B: Engineering, 173, 106962. (doi: 10.1016/j.compositesb.2019.106962)
Suwarta, P., Fotouhi, M. , Czél, G., Longana, M. and Wisnom, M. R. (2019) Fatigue behaviour of pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites. Composite Structures, 224, 110996. (doi: 10.1016/j.compstruct.2019.110996)
Fotouhi, M. , Suwarta, P., Jenkin, R., Jalalvand, M. and Wisnom, M.R. (2019) Fatigue Behaviour of Un-Notched and Open-Hole Quasi-Isotropic Pseudo-Ductile Thin-Ply Carbon/Glass Hybrid Laminates. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Fotouhi, S., Akrami, R., Ferreira‐Green, K., Naser, M. G. A., Fotouhi, M. and Fragassa, C. (2019) Piezoelectric PVDF Sensor as a Reliable Device for Strain/Load Monitoring of Engineering Structures. 9th International Scientific Conference - Research and Development of Mechanical Elements and Systems (IRMES 2019), Kragujevac, Serbia, 5-7 Sept 2019.
Idarraga, G., Fotouhi, M. , Jalalvand, M., Meza, J. and Wisnom, M.R. (2019) Investigation of the Hybrid Effect in High Performance Quasi-Isotropic Thin-Ply Carbon/Glass Composite Under Tension. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Jalalvand, M., Idarraga, G., Fotouhi, M. , Meza, J. and Wisnom, M.R. (2019) Achieving Gradual Failure in Hybrid Composite Laminates-Progressing from Tension to Bending. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Bolouri, A., Moseley, W. and Fotouhi, M. (2019) Effects of Pin Design on Materials Interactions to Friction Stir Spot Joining Aluminium Alloys to Carbon Fibre Reinforced Plastics. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2019), Stockholm, Sweden, 1-5 Sept 2019.
Fotouhi, S., Clamp, J., Bolouri, A. and Fotouhi, M. (2019) Polyether Sulfone Interleaved Glass/Carbon Hybrid Composite Under Impact Loading. 9th International Conference on Composite Testing and Model Identification (CompTest 2019), Luleå, Sweden, 27-29 May 2019.
Fotouhi, M. , Fuller, J., Longana, M., Jalalvand, M. and Wisnom, M. R. (2019) The high strain rate tension behaviour of pseudo-ductile high performance thin ply composites. Composite Structures, 215, pp. 365-376. (doi: 10.1016/j.compstruct.2019.02.068)
Bodaghi, M., Noroozi, R., Zolfagharian, A., Fotouhi, M. and Norouzi, S. (2019) 4D printing self-morphing structures. Materials, 12(8), 1353. (doi: 10.3390/ma12081353) (PMID:31027212) (PMCID:PMC6515691)
Sahmani, S., Fotouhi, M. and Aghdam, M. M. (2019) Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells. Acta Mechanica, 230(3), pp. 1077-1103. (doi: 10.1007/s00707-018-2334-9)
Fotouhi, M. , Fragassa, C., Fotouhi, S., Saghafi, H. and Minak, G. (2019) Damage characterization of nano-interleaved CFRP under static and fatigue loading. Fibers, 7(2), 13. (doi: 10.3390/fib7020013)
Pozegic, T.R., King, S.G., Fotouhi, M. , Stolojan, V., Silva, S.R.P. and Hamerton, I. (2019) Delivering interlaminar reinforcement in composites through electrospun nanofibres. Advanced Manufacturing: Polymer and Composites Science, 5(4), pp. 155-171.(doi: 10.1080/20550340.2019.1665226)
MacLaren, I. , Cummings, R. B., Gordon, F., Frutos-Myro, E., McFadzean, S., Brown, A. P. and Craven, A. J. (2019) Performing EELS at higher energy losses at both 80 and 200 kV. In: Hawkes, P. W. and Hÿtch, M. (eds.) Advances in Imaging and Electron Physics. Volume 210. Academic Press: London, pp. 299-355. ISBN 9780128171837 (doi:10.1016/bs.aiep.2019.02.001)
Grassl, P. and Middlemiss, J. (2019) Finite Element Modelling of Tensile Reinforcement Laps in Steel Fibre Reinforced Concrete. In: The Seventh International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02-04 Sep 2019, pp. 628-631. ISBN 9780429426506 (doi:10.1201/9780429426506-110)
Grassl, P. , Jirásek, M. and Gallipoli, D. (2019) Initiation of fluid-induced fracture in a thick-walled hollow permeable sphere. European Journal of Mechanics - A/Solids, 76, pp. 123-134. (doi: 10.1016/j.euromechsol.2019.04.004)
Grassl, P. (2019) On the Influence of Fibres on Tensile Laps of Reinforcement Loops. In: UKACM 2019, London, UK, 10-12 Apr 2019,
Grassl, P. and Antonelli, A. (2019) 3D network modelling of fracture processes in fibre-reinforced geomaterials. International Journal of Solids and Structures, 156-57, pp. 234-242. (doi: 10.1016/j.ijsolstr.2018.08.019)
Grassl, P. (2019) Modelling the Dynamic Response of Concrete with the Damage Plasticity Model CDPM2. In: 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-X), Bayonne, France, 24-26 Jun 2019,
Sciegaj, A., Grassl, P. , Larsson, F., Lundgren, K. and Runesson, K. (2019) On Periodic Boundary Conditions in Variationally Consistent Homogenisation of Beams and Plates. In: 32nd Nordic Seminar on Computational Mechanics, Oulu, Finland, 24-25 Oct 2019, pp. 150-153. ISBN 9789526224206
dell'Isola, F. et al. (2019) Advances in pantographic structures: design, manufacturing, models, experiments and image analyses. Continuum Mechanics and Thermodynamics, (doi:10.1007/s00161-019-00806-x) (Early Online Publication)
Alsayednoor, J., Harrison, P. , Dobbie, M., Costantini, R. and Lennard, F. (2019) Evaluating the use of digital image correlation for strain measurement in historic tapestries using representative deformation fields. Strain, 55(2), e12308. (doi:10.1111/str.12308)
Kumar, S. , Ubaid, J., Abishera, R., Schiffer, A. and Deshpande, V.S. (2019) Tunable energy absorption characteristics of architected honeycombs enabled via additive manufacturing. ACS Applied Materials and Interfaces, 11(45), pp. 42549-42560. (doi: 10.1021/acsami.9b12880)
Ram, D., Suman, A., Bagui, A. S., Sharma, R., Gupta, V., Yoo, S., Kumar, S. and Singh, S. P. (2019) Effectiveness of Solvent Vapor Annealing over Thermal Annealing on the Photovoltaic Performance of Non-Fullerene Acceptor Based BHJ Solar Cells.Scientific Reports, 9, 8529. (doi: 10.1038/s41598-019-44232-0) (PMID:31189940) (PMCID:PMC6561915)
Alam, F., Kumar, S. and Varadarajan, K. M. (2019) Quantification of adhesion force of bacteria on the surface of biomaterials: techniques and assays. ACS Biomaterials Science and Engineering, 5(5), pp. 2093-2110. (doi: 10.1021/acsbiomaterials.9b00213)
Patole, S. P., Reddy, S. K., Schiffer, A., Askar, K., Prusty, G. and Kumar, S. (2019) Piezoresistive and mechanical characteristics of graphene foam nanocomposites. ACS Applied Nano Materials, 2(3), 1402–1411-1402–1411. (doi: 10.1021/acsanm.8b02306)
Lee, H.S.J. and York, C.B. (2019) Design Procedures for Improved Laminate Performance in Bending and Extension. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Xiao, L., Song, W., Hu, M. and Li, P. (2019) Compressive properties and micro-structural characteristics of Ti–6Al–4V fabricated by electron beam melting and selective laser melting. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 764, 138204. (doi:10.1016/j.msea.2019.138204)
Huang, R., Li, P. , Liu, T. and Xu, J. (2019) The 3D failure process in polymeric syntactic foams with different cenosphere volume fractions. Journal of Applied Polymer Science, 136(19), 47491. (doi:10.1002/app.47491)
Liu, Z., Li, P. and Srikanth, N. (2019) Effect of delamination on the flexural response of [+45/−45/0]2s carbon fibre reinforced polymer laminates. Composite Structures, 209, pp. 93-102. (doi:10.1016/j.compstruct.2018.10.049)
Vasylkiv, O., Borodianska, H., Demirskyi, D., Li, P. , Suzuki, T.S., Grigoroscuta, M.A., Pasuk, I., Kuncser, A. and Badica, P. (2019) Bulks of Al-B-C obtained by reactively spark plasma sintering and impact properties by Split Hopkinson Pressure Bar.Scientific Reports, 9, 19484. (doi:10.1038/s41598-019-55888-z) (PMID:31863060) (PMCID:PMC6925236)
Yao, X., Zhou, J., Lin, Y., Li, Y., Yu, H. and Liu, Y. (2019) Smart manufacturing based on cyber-physical systems and beyond. Journal of Intelligent Manufacturing, 30(8), pp. 2805-2817. (doi: 10.1007/s10845-017-1384-5)
Gong, X., Liu, Y. , Lohse, N., De Pessemier, T., Martens, L. and Joseph, W. (2019) Energy and labor aware production scheduling for industrial demand response using adaptive multi-objective memetic algorithm. IEEE Transactions on Industrial Informatics, 15(2), pp. 942-953. (doi: 10.1109/TII.2018.2839645)
Blakemore, D. M., Govender, I., McBride, A. T. and Mainza, A. N. (2019) Multiple particle tracking in PEPT using Voronoi tessellations. Chemical Engineering Science, 207, pp. 780-789. (doi: 10.1016/j.ces.2019.06.057)
Javili, A., McBride, A.T. and Steinmann, P. (2019) Continuum-kinematics-inspired peridynamics. Mechanical problems. Journal of the Mechanics and Physics of Solids, 131, pp. 125-146. (doi: 10.1016/j.jmps.2019.06.016)
Liu, Z. , McBride, A. , Saxena, P. and Steinmann, P. (2019) Solving the Laplace-Beltrami Equation on Curved Two-dimensional Manifolds using the Finite Element Method with Catmull-Clark Subdivision Surfaces. VII International Conference on Isogeometric Analysis, Munich, 18-20 September 2019.
Tsagkari, E. , Connelly, S. , Liu, Z. , McBride, A. and Sloan, W. T. (2019) A Novel Rapid Prototyping Tool for Suspended Biofilm Growth Media. 6th European Congress on Biofilms (Eurobiofilms 2019), Glasgow, UK, 03-06 Sep 2019.
Tsagkari, E. , Connelly, S. , Liu, Z. , McBride, A. and Sloan, W.T. (2019) How the Design of Filter Media Affects Hydrodynamics and Biofilms in Drinking Water. 8th Congress of European Microbiologists, Glasgow, UK, 9-11 Jul 2019.
Limbert, G., Masen, M. A., Pond, D., Graham, H. K., Sherratt, M. J., Jobanputra, R. and McBride, A. (2019) Biotribology of the ageing skin—why we should care. Biotribology, 17, pp. 75-90. (doi: 10.1016/j.biotri.2019.03.001)
Limbert, G., Pond, D. and McBride, A. (2019) Constitutive modelling of skin ageing. In: Limbert, G. (ed.) Skin Biophysics. Series: Studies in mechanobiology, tissue engineering and biomaterials (22). Springer: Cham, pp. 135-192. ISBN 9783030132781(doi:10.1007/978-3-030-13279-8_5)
McBride, A. , Davydov, D. and Steinmann, P. (2019) Modelling the Flexoelectric Effect in Solids. In: 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02-04 Sep 2019, pp. 278-279. ISBN 9781138386969
Steinmann, P. , McBride, A. and Javili, A. (2019) Novel Vistas on the Foundations of Peridynamics. In: 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02-04 Sep 2019, p. 337. ISBN 9781138386969
Kastiukas, G., Ruan, S., Unluer, C. , Liang, S. and Zhou, X. (2019) Environmental assessment of magnesium oxychloride cement samples: A case study in Europe. Sustainability, 11(24), 6957. (doi: 10.3390/su11246957)
Dong, H., Unluer, C. , Yanga, E.-H., Jin, F. and Al-Tabbaa, A. (2019) Microstructure and carbon storage capacity of hydrated magnesium carbonates synthesized from different sources and conditions. Journal of CO2 Utilization, 34, pp. 353-361. (doi: 10.1016/j.jcou.2019.07.016)
Dung, N.T., Hooper, T.J.N. and Unluer, C. (2019) Accelerating the reaction kinetics and improving the performance of Na2CO3-activated GGBS mixes. Cement and Concrete Research, 126, 105927. (doi: 10.1016/j.cemconres.2019.105927)
Fasihnikoutalab, M. H., Pourakbar, S., Ball, R. J., Unluer, C. and Cristelo, N. (2019) Sustainable soil stabilisation with ground granulated blast-furnace slag activated by olivine and sodium hydroxide. Acta Geotechnica, (doi: 10.1007/s11440-019-00884-w)
Panda, B., Unluer, C. and Tan, M. J. (2019) Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing. Composites Part B: Engineering, 176, 107290. (doi: 10.1016/j.compositesb.2019.107290)
Dung, N.T., Lesimple, A., Hay, R., Celik, K. and Unluer, C. (2019) Formation of carbonate phases and their effect on the performance of reactive MgO cement formulations. Cement and Concrete Research, 125, 105894. (doi: 10.1016/j.cemconres.2019.105894)
Weng, Y., Ruan, S., Li, M., Mo, L., Unluer, C. , Tan, M. J. and Qian, S. (2019) Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing. Construction and Building Materials, 221, pp. 595-603. (doi: 10.1016/j.conbuildmat.2019.05.053)
Ruan, S., Zhou, X. and Unluer, C. (2019) Performance of Reactive Magnesia Cement Containing PFA and GGBS. RILEM International Conference, Strategies for Sustainable Concrete Structures, Lecco, Italy, 5-7 September 2019.
Ruan, S. and Unluer, C. (2019) Factors Influencing the Mechanical Properties of Reactive Magnesia Concrete under Accelerated Carbonation. 1st International Conference on Innovation in Low-carbon Cement & Concrete Technology, London, UK, 24-26 June 2019.
Panda, B., Singh, G. B., Unluer, C. and Tan, M. J. (2019) Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing. Journal of Cleaner Production, 220, pp. 610-619. (doi: 10.1016/j.jclepro.2019.02.185)
Panda, B., Ruan, S., Unluer, C. and Tan, M. J. (2019) Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay. Composites Part B: Engineering, 165, pp. 75-83. (doi: 10.1016/j.compositesb.2018.11.109)
Dung, N.T. and Unluer, C. (2019) Performance of reactive MgO concrete under increased CO2 dissolution. Cement and Concrete Research, 118, pp. 92-101. (doi: 10.1016/j.cemconres.2019.02.007)
Pu, L. and Unluer, C. (2019) Performance and microstructure of carbonated MgO samples under high temperatures. Journal of Materials in Civil Engineering, 31(3), 04019003. (doi: 10.1061/(ASCE)MT.1943-5533.0002624)
Sonat, C. and Unluer, C. (2019) Development of magnesium-silicate-hydrate (M-S-H) cement with rice husk ash. Journal of Cleaner Production, 211, pp. 787-803. (doi: 10.1016/j.jclepro.2018.11.246)
Qiu, J., Ruan, S., Unluer, C. and Yang, E.-H. (2019) Autogenous healing of fiber-reinforced reactive magnesia-based tensile strain-hardening composites. Cement and Concrete Research, 115, pp. 401-413. (doi: 10.1016/j.cemconres.2018.09.016)
Ruan, S., Qiu, J., Weng, Y., Yang, Y., Yang, E.-H., Chu, J. and Unluer, C. (2019) The use of microbial induced carbonate precipitation in healing cracks within reactive magnesia cement-based blends. Cement and Concrete Research, 115, pp. 176-188. (doi: 10.1016/j.cemconres.2018.10.018)
Williams, R., Barbera, D., Docherty, M., Bray, S. and McBride, A. (2019) Computational modelling of inertia friction welding. Proceedings in Applied Mathematics and Mechanics, (doi:10.1002/pamm.201900500)
Xiao, Z. and Harrison, P. (2019) Buckling Analysis of Variable Stiffness Panels Manufactured by Fabric Steering Technology. In: 22nd International Conference on Composites Materials (ICCM22), Melbourne, Australia, 11-19 Aug 2019,
Packham, M. and Barbera, D. (2019) Investigating the effect of creep propertiesn mismatch in very thin pipes within high-temperature facilities. In: Advances in Mechanics of High-Temperature Materials. Series: Advanced structured materials (117). Springer: Cham, Switzerland, pp. 107-130. ISBN 9783030238681 (doi:10.1007/978-3-030-23869-8_6)
Feeney, A. , Kang, L., Somerset, W. E. and Dixon, S. (2019) The influence of air pressure on the dynamics of flexural ultrasonic transducers. Sensors, 19(21), 4710. (doi: 10.3390/s19214710)
Kang, L., Feeney, A. , Su, R., Lines, D., Ramadas, S. N., Rowlands, G. and Dixon, S. (2019) Flow velocity measurement using a spatial averaging method with two-dimensional flexural ultrasonic array technology. Sensors, 19(21), 4786. (doi: 10.3390/s19214786)
Feeney, A. , Kang, L., Rowlands, G. and Dixon, S. (2019) The Nonlinear Dynamics of Flexural Ultrasonic Transducers. In: 2019 International Congress on Ultrasonics, Bruges, Belgium, 03-06 Sep 2019, 045015. (doi:10.1121/2.0001095)
Feeney, A. , Kang, L., Somerset, W. E. and Dixon, S. (2019) Measurement Using Flexural Ultrasonic Transducers in High Pressure Environments. In: 2019 International Congress on Ultrasonics, Bruges, Belgium, 03-06 Sep 2019, 045014. (doi:10.1121/2.0001091)
Feeney, A. , Kang, L. and Dixon, S. (2019) Dynamic nonlinearity in piezoelectric flexural ultrasonic transducers. IEEE Sensors Journal, 19(15), pp. 6056-6066. (doi: 10.1109/JSEN.2019.2911158)
Kang, L., Feeney, A. and Dixon, S. (2019) Wideband electromagnetic dynamic acoustic transducers (WEMDATs) for air-coupled ultrasonic applications. Applied Physics Letters, 114(5), 053505. (doi: 10.1063/1.5086383)
Kang, L., Feeney, A. , Somerset, W. and Dixon, S. (2019) Wideband Electromagnetic Dynamic Acoustic Transducer as a Standard Acoustic Source for Air-coupled Ultrasonic Sensors. In: 2019 IEEE International Ultrasonics Symposium (IUS), Glasgow, UK, 06-09 Oct 2019, pp. 2481-2484. ISBN 9781728145969 (doi:10.1109/ULTSYM.2019.8926271)
Kang, L., Feeney, A. , Somerset, W., Su, R., Lines, D., Ramadas, S. N. and Dixon, S. (2019) A Novel Mathematical Model for Transit-time Ultrasonic Flow Measurement. In: 2019 IEEE International Ultrasonics Symposium (IUS), Glasgow, UK, 06-09 Oct 2019, pp. 1590-1593. ISBN 9781728145969 (doi:10.1109/ULTSYM.2019.8925693)
Akrami, R., Fotouhi, S., Fotouhi, M. , Bodaghi, M., Clamp, J. and Bolouri, A. (2019) High-performance bio-inspired composite T-joints. Composites Science and Technology, 184, 107840. (doi: 10.1016/j.compscitech.2019.107840)
Fotouhi, S., Clamp, J., Bolouri, A., Pozegic, T. R. and Fotouhi, M. (2019) Investigating polyethersulfone interleaved glass/carbon hybrid composite under impact and its comparison with GLARE. Composite Structures, 226, 111268. (doi: 10.1016/j.compstruct.2019.111268)
Suresh Kumar, C., Fotouhi, M. , Saeedifar, M. and Arumugam, V. (2019) Acoustic emission based investigation on the effect of temperature and hybridization on drop weight impact and post-impact residual strength of hemp and basalt fibres reinforced polymer composite laminates. Composites Part B: Engineering, 173, 106962. (doi: 10.1016/j.compositesb.2019.106962)
Suwarta, P., Fotouhi, M. , Czél, G., Longana, M. and Wisnom, M. R. (2019) Fatigue behaviour of pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites. Composite Structures, 224, 110996. (doi: 10.1016/j.compstruct.2019.110996)
Fotouhi, M. , Suwarta, P., Jenkin, R., Jalalvand, M. and Wisnom, M.R. (2019) Fatigue Behaviour of Un-Notched and Open-Hole Quasi-Isotropic Pseudo-Ductile Thin-Ply Carbon/Glass Hybrid Laminates. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Fotouhi, S., Akrami, R., Ferreira‐Green, K., Naser, M. G. A., Fotouhi, M. and Fragassa, C. (2019) Piezoelectric PVDF Sensor as a Reliable Device for Strain/Load Monitoring of Engineering Structures. 9th International Scientific Conference - Research and Development of Mechanical Elements and Systems (IRMES 2019), Kragujevac, Serbia, 5-7 Sept 2019.
Idarraga, G., Fotouhi, M. , Jalalvand, M., Meza, J. and Wisnom, M.R. (2019) Investigation of the Hybrid Effect in High Performance Quasi-Isotropic Thin-Ply Carbon/Glass Composite Under Tension. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Jalalvand, M., Idarraga, G., Fotouhi, M. , Meza, J. and Wisnom, M.R. (2019) Achieving Gradual Failure in Hybrid Composite Laminates-Progressing from Tension to Bending. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Bolouri, A., Moseley, W. and Fotouhi, M. (2019) Effects of Pin Design on Materials Interactions to Friction Stir Spot Joining Aluminium Alloys to Carbon Fibre Reinforced Plastics. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2019), Stockholm, Sweden, 1-5 Sept 2019.
Fotouhi, S., Clamp, J., Bolouri, A. and Fotouhi, M. (2019) Polyether Sulfone Interleaved Glass/Carbon Hybrid Composite Under Impact Loading. 9th International Conference on Composite Testing and Model Identification (CompTest 2019), Luleå, Sweden, 27-29 May 2019.
Fotouhi, M. , Fuller, J., Longana, M., Jalalvand, M. and Wisnom, M. R. (2019) The high strain rate tension behaviour of pseudo-ductile high performance thin ply composites. Composite Structures, 215, pp. 365-376. (doi: 10.1016/j.compstruct.2019.02.068)
Bodaghi, M., Noroozi, R., Zolfagharian, A., Fotouhi, M. and Norouzi, S. (2019) 4D printing self-morphing structures. Materials, 12(8), 1353. (doi: 10.3390/ma12081353) (PMID:31027212) (PMCID:PMC6515691)
Sahmani, S., Fotouhi, M. and Aghdam, M. M. (2019) Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells. Acta Mechanica, 230(3), pp. 1077-1103. (doi: 10.1007/s00707-018-2334-9)
Fotouhi, M. , Fragassa, C., Fotouhi, S., Saghafi, H. and Minak, G. (2019) Damage characterization of nano-interleaved CFRP under static and fatigue loading. Fibers, 7(2), 13. (doi: 10.3390/fib7020013)
Pozegic, T.R., King, S.G., Fotouhi, M. , Stolojan, V., Silva, S.R.P. and Hamerton, I. (2019) Delivering interlaminar reinforcement in composites through electrospun nanofibres. Advanced Manufacturing: Polymer and Composites Science, 5(4), pp. 155-171.(doi: 10.1080/20550340.2019.1665226)
MacLaren, I. , Cummings, R. B., Gordon, F., Frutos-Myro, E., McFadzean, S., Brown, A. P. and Craven, A. J. (2019) Performing EELS at higher energy losses at both 80 and 200 kV. In: Hawkes, P. W. and Hÿtch, M. (eds.) Advances in Imaging and Electron Physics. Volume 210. Academic Press: London, pp. 299-355. ISBN 9780128171837 (doi:10.1016/bs.aiep.2019.02.001)
Grassl, P. and Middlemiss, J. (2019) Finite Element Modelling of Tensile Reinforcement Laps in Steel Fibre Reinforced Concrete. In: The Seventh International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02-04 Sep 2019, pp. 628-631. ISBN 9780429426506 (doi:10.1201/9780429426506-110)
Grassl, P. , Jirásek, M. and Gallipoli, D. (2019) Initiation of fluid-induced fracture in a thick-walled hollow permeable sphere. European Journal of Mechanics - A/Solids, 76, pp. 123-134. (doi: 10.1016/j.euromechsol.2019.04.004)
Grassl, P. (2019) On the Influence of Fibres on Tensile Laps of Reinforcement Loops. In: UKACM 2019, London, UK, 10-12 Apr 2019,
Grassl, P. and Antonelli, A. (2019) 3D network modelling of fracture processes in fibre-reinforced geomaterials. International Journal of Solids and Structures, 156-57, pp. 234-242. (doi: 10.1016/j.ijsolstr.2018.08.019)
Grassl, P. (2019) Modelling the Dynamic Response of Concrete with the Damage Plasticity Model CDPM2. In: 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-X), Bayonne, France, 24-26 Jun 2019,
Sciegaj, A., Grassl, P. , Larsson, F., Lundgren, K. and Runesson, K. (2019) On Periodic Boundary Conditions in Variationally Consistent Homogenisation of Beams and Plates. In: 32nd Nordic Seminar on Computational Mechanics, Oulu, Finland, 24-25 Oct 2019, pp. 150-153. ISBN 9789526224206
dell'Isola, F. et al. (2019) Advances in pantographic structures: design, manufacturing, models, experiments and image analyses. Continuum Mechanics and Thermodynamics, (doi:10.1007/s00161-019-00806-x) (Early Online Publication)
Alsayednoor, J., Harrison, P. , Dobbie, M., Costantini, R. and Lennard, F. (2019) Evaluating the use of digital image correlation for strain measurement in historic tapestries using representative deformation fields. Strain, 55(2), e12308. (doi:10.1111/str.12308)
Kumar, S. , Ubaid, J., Abishera, R., Schiffer, A. and Deshpande, V.S. (2019) Tunable energy absorption characteristics of architected honeycombs enabled via additive manufacturing. ACS Applied Materials and Interfaces, 11(45), pp. 42549-42560. (doi: 10.1021/acsami.9b12880)
Ram, D., Suman, A., Bagui, A. S., Sharma, R., Gupta, V., Yoo, S., Kumar, S. and Singh, S. P. (2019) Effectiveness of Solvent Vapor Annealing over Thermal Annealing on the Photovoltaic Performance of Non-Fullerene Acceptor Based BHJ Solar Cells.Scientific Reports, 9, 8529. (doi: 10.1038/s41598-019-44232-0) (PMID:31189940) (PMCID:PMC6561915)
Alam, F., Kumar, S. and Varadarajan, K. M. (2019) Quantification of adhesion force of bacteria on the surface of biomaterials: techniques and assays. ACS Biomaterials Science and Engineering, 5(5), pp. 2093-2110. (doi: 10.1021/acsbiomaterials.9b00213)
Patole, S. P., Reddy, S. K., Schiffer, A., Askar, K., Prusty, G. and Kumar, S. (2019) Piezoresistive and mechanical characteristics of graphene foam nanocomposites. ACS Applied Nano Materials, 2(3), 1402–1411-1402–1411. (doi: 10.1021/acsanm.8b02306)
Lee, H.S.J. and York, C.B. (2019) Design Procedures for Improved Laminate Performance in Bending and Extension. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Xiao, L., Song, W., Hu, M. and Li, P. (2019) Compressive properties and micro-structural characteristics of Ti–6Al–4V fabricated by electron beam melting and selective laser melting. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 764, 138204. (doi:10.1016/j.msea.2019.138204)
Huang, R., Li, P. , Liu, T. and Xu, J. (2019) The 3D failure process in polymeric syntactic foams with different cenosphere volume fractions. Journal of Applied Polymer Science, 136(19), 47491. (doi:10.1002/app.47491)
Liu, Z., Li, P. and Srikanth, N. (2019) Effect of delamination on the flexural response of [+45/−45/0]2s carbon fibre reinforced polymer laminates. Composite Structures, 209, pp. 93-102. (doi:10.1016/j.compstruct.2018.10.049)
Vasylkiv, O., Borodianska, H., Demirskyi, D., Li, P. , Suzuki, T.S., Grigoroscuta, M.A., Pasuk, I., Kuncser, A. and Badica, P. (2019) Bulks of Al-B-C obtained by reactively spark plasma sintering and impact properties by Split Hopkinson Pressure Bar.Scientific Reports, 9, 19484. (doi:10.1038/s41598-019-55888-z) (PMID:31863060) (PMCID:PMC6925236)
Yao, X., Zhou, J., Lin, Y., Li, Y., Yu, H. and Liu, Y. (2019) Smart manufacturing based on cyber-physical systems and beyond. Journal of Intelligent Manufacturing, 30(8), pp. 2805-2817. (doi: 10.1007/s10845-017-1384-5)
Gong, X., Liu, Y. , Lohse, N., De Pessemier, T., Martens, L. and Joseph, W. (2019) Energy and labor aware production scheduling for industrial demand response using adaptive multi-objective memetic algorithm. IEEE Transactions on Industrial Informatics, 15(2), pp. 942-953. (doi: 10.1109/TII.2018.2839645)
Blakemore, D. M., Govender, I., McBride, A. T. and Mainza, A. N. (2019) Multiple particle tracking in PEPT using Voronoi tessellations. Chemical Engineering Science, 207, pp. 780-789. (doi: 10.1016/j.ces.2019.06.057)
Javili, A., McBride, A.T. and Steinmann, P. (2019) Continuum-kinematics-inspired peridynamics. Mechanical problems. Journal of the Mechanics and Physics of Solids, 131, pp. 125-146. (doi: 10.1016/j.jmps.2019.06.016)
Liu, Z. , McBride, A. , Saxena, P. and Steinmann, P. (2019) Solving the Laplace-Beltrami Equation on Curved Two-dimensional Manifolds using the Finite Element Method with Catmull-Clark Subdivision Surfaces. VII International Conference on Isogeometric Analysis, Munich, 18-20 September 2019.
Tsagkari, E. , Connelly, S. , Liu, Z. , McBride, A. and Sloan, W. T. (2019) A Novel Rapid Prototyping Tool for Suspended Biofilm Growth Media. 6th European Congress on Biofilms (Eurobiofilms 2019), Glasgow, UK, 03-06 Sep 2019.
Tsagkari, E. , Connelly, S. , Liu, Z. , McBride, A. and Sloan, W.T. (2019) How the Design of Filter Media Affects Hydrodynamics and Biofilms in Drinking Water. 8th Congress of European Microbiologists, Glasgow, UK, 9-11 Jul 2019.
Limbert, G., Masen, M. A., Pond, D., Graham, H. K., Sherratt, M. J., Jobanputra, R. and McBride, A. (2019) Biotribology of the ageing skin—why we should care. Biotribology, 17, pp. 75-90. (doi: 10.1016/j.biotri.2019.03.001)
Limbert, G., Pond, D. and McBride, A. (2019) Constitutive modelling of skin ageing. In: Limbert, G. (ed.) Skin Biophysics. Series: Studies in mechanobiology, tissue engineering and biomaterials (22). Springer: Cham, pp. 135-192. ISBN 9783030132781(doi:10.1007/978-3-030-13279-8_5)
McBride, A. , Davydov, D. and Steinmann, P. (2019) Modelling the Flexoelectric Effect in Solids. In: 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02-04 Sep 2019, pp. 278-279. ISBN 9781138386969
Steinmann, P. , McBride, A. and Javili, A. (2019) Novel Vistas on the Foundations of Peridynamics. In: 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02-04 Sep 2019, p. 337. ISBN 9781138386969
Kastiukas, G., Ruan, S., Unluer, C. , Liang, S. and Zhou, X. (2019) Environmental assessment of magnesium oxychloride cement samples: A case study in Europe. Sustainability, 11(24), 6957. (doi: 10.3390/su11246957)
Dong, H., Unluer, C. , Yanga, E.-H., Jin, F. and Al-Tabbaa, A. (2019) Microstructure and carbon storage capacity of hydrated magnesium carbonates synthesized from different sources and conditions. Journal of CO2 Utilization, 34, pp. 353-361. (doi: 10.1016/j.jcou.2019.07.016)
Dung, N.T., Hooper, T.J.N. and Unluer, C. (2019) Accelerating the reaction kinetics and improving the performance of Na2CO3-activated GGBS mixes. Cement and Concrete Research, 126, 105927. (doi: 10.1016/j.cemconres.2019.105927)
Fasihnikoutalab, M. H., Pourakbar, S., Ball, R. J., Unluer, C. and Cristelo, N. (2019) Sustainable soil stabilisation with ground granulated blast-furnace slag activated by olivine and sodium hydroxide. Acta Geotechnica, (doi: 10.1007/s11440-019-00884-w)
Panda, B., Unluer, C. and Tan, M. J. (2019) Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing. Composites Part B: Engineering, 176, 107290. (doi: 10.1016/j.compositesb.2019.107290)
Dung, N.T., Lesimple, A., Hay, R., Celik, K. and Unluer, C. (2019) Formation of carbonate phases and their effect on the performance of reactive MgO cement formulations. Cement and Concrete Research, 125, 105894. (doi: 10.1016/j.cemconres.2019.105894)
Weng, Y., Ruan, S., Li, M., Mo, L., Unluer, C. , Tan, M. J. and Qian, S. (2019) Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing. Construction and Building Materials, 221, pp. 595-603. (doi: 10.1016/j.conbuildmat.2019.05.053)
Ruan, S., Zhou, X. and Unluer, C. (2019) Performance of Reactive Magnesia Cement Containing PFA and GGBS. RILEM International Conference, Strategies for Sustainable Concrete Structures, Lecco, Italy, 5-7 September 2019.
Ruan, S. and Unluer, C. (2019) Factors Influencing the Mechanical Properties of Reactive Magnesia Concrete under Accelerated Carbonation. 1st International Conference on Innovation in Low-carbon Cement & Concrete Technology, London, UK, 24-26 June 2019.
Panda, B., Singh, G. B., Unluer, C. and Tan, M. J. (2019) Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing. Journal of Cleaner Production, 220, pp. 610-619. (doi: 10.1016/j.jclepro.2019.02.185)
Panda, B., Ruan, S., Unluer, C. and Tan, M. J. (2019) Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay. Composites Part B: Engineering, 165, pp. 75-83. (doi: 10.1016/j.compositesb.2018.11.109)
Dung, N.T. and Unluer, C. (2019) Performance of reactive MgO concrete under increased CO2 dissolution. Cement and Concrete Research, 118, pp. 92-101. (doi: 10.1016/j.cemconres.2019.02.007)
Pu, L. and Unluer, C. (2019) Performance and microstructure of carbonated MgO samples under high temperatures. Journal of Materials in Civil Engineering, 31(3), 04019003. (doi: 10.1061/(ASCE)MT.1943-5533.0002624)
Sonat, C. and Unluer, C. (2019) Development of magnesium-silicate-hydrate (M-S-H) cement with rice husk ash. Journal of Cleaner Production, 211, pp. 787-803. (doi: 10.1016/j.jclepro.2018.11.246)
Qiu, J., Ruan, S., Unluer, C. and Yang, E.-H. (2019) Autogenous healing of fiber-reinforced reactive magnesia-based tensile strain-hardening composites. Cement and Concrete Research, 115, pp. 401-413. (doi: 10.1016/j.cemconres.2018.09.016)
Ruan, S., Qiu, J., Weng, Y., Yang, Y., Yang, E.-H., Chu, J. and Unluer, C. (2019) The use of microbial induced carbonate precipitation in healing cracks within reactive magnesia cement-based blends. Cement and Concrete Research, 115, pp. 176-188. (doi: 10.1016/j.cemconres.2018.10.018)
Williams, R., Barbera, D., Docherty, M., Bray, S. and McBride, A. (2019) Computational modelling of inertia friction welding. Proceedings in Applied Mathematics and Mechanics, (doi:10.1002/pamm.201900500)
Xiao, Z. and Harrison, P. (2019) Buckling Analysis of Variable Stiffness Panels Manufactured by Fabric Steering Technology. In: 22nd International Conference on Composites Materials (ICCM22), Melbourne, Australia, 11-19 Aug 2019,
2018
Puliyaneth, M., Barbera, D., Chen, H. and Xuan, F. (2018) Study of ratchet limit and cyclic response of welded pipe. International Journal of Pressure Vessels and Piping, (Accepted for Publication)
Feeney, A. , Kang, L. and Dixon, S. (2018) High frequency measurement of ultrasound using flexural ultrasonic transducers. IEEE Sensors Journal, 18(13), pp. 5238-5244. (doi: 10.1109/JSEN.2018.2835146)
Feeney, A. , Kang, L. and Dixon, S. (2018) Nonlinearity in the dynamic response of flexural ultrasonic transducers. IEEE Sensors Letters, 2(1), 2500104. (doi: 10.1109/LSENS.2017.2779183)
Feeney, A. and Lucas, M. (2018) A comparison of two configurations for a dual-resonance cymbal transducer. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 65(3), pp. 489-496. (doi: 10.1109/TUFFC.2018.2793310)
Feeney, A. , Kang, L., Rowlands, G. and Dixon, S. (2018) The dynamic performance of flexural ultrasonic transducers. Sensors, 18(1), 270. (doi: 10.3390/s18010270)
Kang, L., Feeney, A. and Dixson, S. (2018) Analysis of Influence of Inconsistent Performances of Array Elements on Flexural Ultrasonic Phased Array for Measurement of Ultrasound in Fluids. In: 2018 IEEE International Ultrasonics Symposium (IUS), Kobe, Japan, 22-25 Oct 2018, ISBN 9781538634257 (doi:10.1109/ULTSYM.2018.8580009)
Fotouhi, S., Fotouhi, M. , Pavlovic, A. and Djordjevic, N. (2018) Investigating the pre-damaged PZT sensors under impact traction. Journal of Marine Science and Engineering, 6(4), 142. (doi: 10.3390/jmse6040142)
Saghafi, H., Fotouhi, M. and Minak, G. (2018) Improvement of the impact properties of composite laminates by means of nano-modification of the matrix—a review. Applied Sciences, 8(12), 2406. (doi: 10.3390/app8122406)
Suwarta, P., Czel, G., Fotouhi, M. , Rucerz, J. and Wisnom, M. R. (2018) Pseudo-ductility of Unidirectional Thin Ply Hybrid Composites in Longitudinal Compression. In: 33rd Technical Conference of the American Society for Composites, Seattle, WA, USA, 24-27 Sept 2018, pp. 1032-1041. ISBN 9781510872073
Fotouhi, M. , Jalalvand, M., Wu, X. and Wisnom, M.R. (2018) Bearing and Bypass Bearing of Pseudo-ductile Thin-ply Carbon/Glass Hybrids. 21st International Conference on Composite Structures (ICCS21), Bologna, Italy, 4-7 Sept 2018.
Fotouhi, M. , Jalalvand, M., Wu, X. and Wisnom, M.R. (2018) Compact Tension Test Behaviour of Pseudo-ductile Thin-ply Carbon/Glass Hybrids. 21st International Conference on Composite Structures (ICCS21), Bologna, Italy, 4-7 Sept 2018.
Fotouhi, M. , Jalalvand, M. and Wisnom, M. R. (2018) Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates. Composites Part A: Applied Science and Manufacturing, 110, pp. 29-44. (doi: 10.1016/j.compositesa.2018.04.012)
Sobhani, A., Saeedifar, M., Najafabadi, M. A., Fotouhi, M. and Zarouchas, D. (2018) The study of buckling and post-buckling behavior of laminated composites consisting multiple delaminations using acoustic emission. Thin-Walled Structures, 127, pp. 145-156. (doi: 10.1016/j.tws.2018.02.011)
Bolouri, A. and Fotouhi, M. (2018) High-performance Composite T-joints: Topological Design Strategy Towards Strength Improvement and Weight Reduction. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
De, M., Pozegic, T., Hamerton, I. and Fotouhi, M. (2018) Development and Evaluation of a Novel Piezoelectric PVDF Sensor as a Load Spectrum Counter. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Fotouhi, M. , Jalalvand, M., Prato, A. and Wisnom, M. R. (2018) Thin Ply Carbon/ Glass Hybrid Laminates to Activate New Damage Mechanisms Under Indentation. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Jalalvand, M., Wu, H. W. M. L., Sheibanian, F., Fotouhi, M. and Wisnom, M. R. (2018) Self-warning Hybrid Composite Patches for Repairing Cracked Aluminium Panels. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Wisnom, M. R., Czél, G., Fotouhi, M. , Fuller, J., Jalalvand, M., Rev, T. and Wu, X. (2018) Reduced Notch-Sensitivity in Pseudo-Ductile Thin-Ply Composites. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Wu, X., Fuller, J.D., Fotouhi, M. and Wisnom, M. (2018) Bearing Failure of Pseudo-ductile Thin Ply Angle-ply Laminates. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Saeedifar, M., Ahmadi Najafabadi, M., Mohammadi, K., Fotouhi, M. , Hosseini Toudeshky, H. and Mohammadi, R. (2018) Acoustic emission-based methodology to evaluate delamination crack growth under quasi-static and fatigue loading conditions.Journal of Nondestructive Evaluation, 37(1), 1. (doi: 10.1007/s10921-017-0454-0)
Pashmforoush, F., Fotouhi, M. and Sarhan, A. A. D. (2018) Experimental–numerical study on minimizing impact induced damage in laminated composites under low-velocity impact. Journal of Reinforced Plastics and Composites, 37(3), pp. 155-165. (doi: 10.1177/0731684417737166)
Czél, G., Rev, T., Jalalvand, M., Fotouhi, M. , Longana, M. L., Nixon-Pearson, O. J. and Wisnom, M. R. (2018) Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon/epoxy thin-ply hybrid composites. Composites Part A: Applied Science and Manufacturing, 104, pp. 151-164. (doi: 10.1016/j.compositesa.2017.10.028)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M. (2018) Acoustic emission monitoring of thin ply hybrid composites under repeated quasi-static tensile loading. FME Transactions, 46, pp. 238-244. (doi: 10.5937/fmet1802238F)
Sadeghi, S., Karimi, Z., Fotouhi, M. , Hasani, M., Najafabadi, M. A. and Pavlović, A. (2018) Residual stress evaluation in friction stir welding of aluminium plates by means of acoustic emission and ultrasonic waves. FME Transactions, 46, pp. 230-237. (doi: 10.5937/fmet1802230S)
Gallipoli, D., Grassl, P. , Wheeler, S. and Gens, A. (2018) On the choice of stress–strain variables for unsaturated soils and its effect on plastic flow. Geomechanics for Energy and the Environment, 15, pp. 3-9. (doi: 10.1016/j.gete.2018.02.002)
Grassl, P. , Johansson, M. and Leppänen, J. (2018) On the numerical modelling of bond for the failure analysis of reinforced concrete. Engineering Fracture Mechanics, 189, pp. 13-26. (doi: 10.1016/j.engfracmech.2017.10.008)
Grassl, P. and Antonelli, A. (2018) Network Modelling of Fracture Processes in Fibre-Reinforced Quasi-Brittle Materials. In: Conference on Computational Modelling of Concrete and Concrete Structures (EURO-C 2018), Bad Hofgastein, Austria, 26 Feb - 1 Mar 2018, pp. 55-61. ISBN 9781138741171
Athanasiadis, I., Wheeler, S. J. and Grassl, P. (2018) Hydro-mechanical network modelling of particulate composites. International Journal of Solids and Structures, 130-31, pp. 49-60. (doi: 10.1016/j.ijsolstr.2017.10.017)
Chen, S. et al. (2018) On the limits of scalpel AFM for the 3D electrical characterization of nanomaterials. Advanced Functional Materials, 28(52), 1802266. (doi: 10.1002/adfm.201802266)
Harrison, P. , Alvarez, M. F. and Anderson, D. (2018) Towards comprehensive characterisation and modelling of the forming and wrinkling mechanics of engineering fabrics. International Journal of Solids and Structures, 154, pp. 2-18.(doi:10.1016/j.ijsolstr.2016.11.008)
Giorgio, I., Harrison, P., dell’Isola, F., Alsayednoor, J. and Turco, E. (2018) Wrinkling in engineering fabrics: a comparison between two different comprehensive modelling approaches. Proceedings of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 474(2216), 20180063. (doi:10.1098/rspa.2018.0063)
Harrison, P., Fernandez Alvarez, M., Correia, N., Mimoso, P., Cristovao, C. and Gomes, R. (2018) Characterising the forming mechanics of pre-consolidated nylon-carbon composite. In: ECCM 18: 18th European Conference on Composite Materials, Athens, Greece, 24-28 June 2018, (Accepted for Publication)
Harrison, P., Taylor, E. and Alsayednoor, J. (2018) Improving the accuracy of the uniaxial bias extension test on engineering fabrics using a simple wrinkle mitigation technique. Composites Part A: Applied Science and Manufacturing, 108, pp. 53-61. (doi:10.1016/j.compositesa.2018.02.025)
Rajkumar, A. R. and Shanmugam, K. (2018) Additive manufacturing-enabled shape transformations via FFF 4D printing. Journal of Materials Research, 33(24), pp. 4362-4376. (doi: 10.1557/jmr.2018.397)
Dugbenoo, E., Arif, M. F., Wardle, B. L. and Kumar, S. (2018) Enhanced bonding via additive manufacturing-enabled surface tailoring of 3D printed continuous-fiber composites. Advanced Engineering Materials, 20(12), 1800691. (doi: 10.1002/adem.201800691)
Patole, S. P., Arif, M. F. and Kumar, S. (2018) Polyvinyl alcohol incorporated buckypaper composites for improved multifunctional performance. Composites Science and Technology, 168, pp. 429-436. (doi: 10.1016/j.compscitech.2018.10.010)
Kavitha, T. and Kumer, S. (2018) Turning date palm fronds into biocompatible mesoporous fluorescent carbon dots. Scientific Reports, 8, 16269. (doi: 10.1038/s41598-018-34349-z) (PMID:30257078) (PMCID:PMC6492006)
Reddy, S.K., Kumar, S., Varadarajan, K.M., Marpu, P.R., Gupta, T. K. and Choosri, M. (2018) Strain and damage-sensing performance of biocompatible smart CNT/UHMWPE nanocomposites. Materials Science and Engineering C: Materials for Biological Applications, 92, pp. 957-968. (doi: 10.1016/j.msec.2018.07.029)
Khan, M.A., Kumar, S. and Cantwell, W. J. (2018) Additively manufactured cylindrical systems with stiffness-tailored interface: Modeling and experiments. International Journal of Solids and Structures, 152-15, pp. 71-84. (doi: 10.1016/j.ijsolstr.2018.06.002)
Khan, M.A., Kumar, S. and Reddy, J.N. (2018) Material-tailored adhesively bonded multilayers: A theoretical analysis. International Journal of Mechanical Sciences, 148, pp. 246-262. (doi: 10.1016/j.ijmecsci.2018.08.017)
Arif, M. F., Kumar, S., Gupta, T. K. and Varadarajan, K. M. (2018) Strong linear-piezoresistive-response of carbon nanostructures reinforced hyperelastic polymer nanocomposites. Composites Part A: Applied Science and Manufacturing, 113, pp. 141-149.(doi: 10.1016/j.compositesa.2018.07.021)
Ubaid, J., Wardle, B. L. and Kumar, S. (2018) Strength and performance enhancement of multilayers by spatial tailoring of adherend compliance and morphology via multimaterial jetting additive manufacturing. Scientific Reports, 8, 13592. (doi: 10.1038/s41598-018-31819-2) (PMID:30206331) (PMCID:PMC6134147)
Arif, M.F., Kumar, S., Varadarajan, K.M. and Cantwell, W.J. (2018) Performance of biocompatible PEEK processed by fused deposition additive manufacturing. Materials and Design, 146, pp. 249-259. (doi: 10.1016/j.matdes.2018.03.015)
Khan, M.A. and Kumar, S. (2018) Performance enhancement of tubular multilayers via compliance-tailoring: 3D printing, testing and modeling. International Journal of Mechanical Sciences, 140, pp. 93-108. (doi: 10.1016/j.ijmecsci.2018.02.038)
Kumar, S., Wardle, B. L., Arif, M. F. and Ubaid, J. (2018) Stress reduction of 3D printed compliance-tailored multilayers. Advanced Engineering Materials, 20(1), 1700883. (doi: 10.1002/adem.201700883)
Wang, Z., Li, P. and Song, W. (2018) Inelastic deformation micromechanism and modified fragmentation model for silicon carbide under dynamic compression. Materials and Design, 157, pp. 244-250. (doi:10.1016/j.matdes.2018.07.032)
Badica, P., Batalu, D., Burdusel, M., Grigoroscuta, M. A., Aldica, G. V., Enculescu, M., Gabor, R. A., Wang, Z., Huang, R. and Li, P. (2018) Compressive properties of pristine and SiC-Te-added MgB 2 powders, green compacts and spark-plasma-sintered bulks. Ceramics International, 44(9), pp. 10181-10191. (doi:10.1016/j.ceramint.2018.03.008)
Wang, Z. and Li, P. (2018) Characterisation and constitutive model of tensile properties of selective laser melted Ti-6Al-4V struts for microlattice structures. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 725, pp. 350-358.(doi:10.1016/j.msea.2018.04.006)
Zhang, Y., Guo, Z., Lv, J. and Liu, Y. (2018) A framework for smart production-logistics systems based on CPS and industrial IoT. IEEE Transactions on Industrial Informatics, 14(9), pp. 4019-4032. (doi:10.1109/TII.2018.2845683)
Lv, J., Tang, R., Tang, W., Jia, S., Liu, Y. and Cao, Y. (2018) An investigation into methods for predicting material removal energy consumption in turning.Journal of Cleaner Production, 193, pp. 128-139. (doi:10.1016/j.jclepro.2018.05.035)
Liu, Y. , Farnsworth, M. and Tiwari, A. (2018) Energy-efficient scheduling of flexible flow shop of composite recycling. International Journal of Advanced Manufacturing Technology, 97(1-4), pp. 117-127. (doi:10.1007/s00170-018-1852-x)
Hu, L., Tang, R., Liu, Y. , Cao, Y. and Tiwari, A. (2018) Optimising the machining time, deviation and energy consumption through a multi-objective feature sequencing approach. Energy Conversion and Management, 160, pp. 126-140.(doi:10.1016/j.enconman.2018.01.005)
McBride, A.T. , Reddy, B.D. and Steinmann, P. (2018) Dissipation-consistent modelling and classification of extended plasticity formulations.Journal of the Mechanics and Physics of Solids, 119, pp. 118-139. (doi:10.1016/j.jmps.2018.06.002)
Pond, D., McBride, A.T. , Davids, L.M., Reddy, B.D. and Limbert, G. (2018) Microstructurally-based constitutive modelling of the skin – linking intrinsic ageing to microstructural parameters. Journal of Theoretical Biology, 444, pp. 108-123. (doi:10.1016/j.jtbi.2018.01.014) (PMID:29407269)
de Villiers, A.M., McBride, A.T. , Reddy, B.D., Franz, T. and Spottiswoode, B.S. (2018) A validated patient-specific FSI model for vascular access in haemodialysis. Biomechanics and Modeling in Mechanobiology, 17(2), pp. 479-497. (doi:10.1007/s10237-017-0973-8) (PMID:29139052)
Min, G., Manjakkal, L. , Mulvihill, D. M. and Dahiya, R. S. (2018) Enhanced Triboelectric Nanogenerator Performance via an Optimised Low Permittivity, Low Thickness Substrate. In: IEEE Sensors Conference, New Delhi, India, 28-31 Oct 2018, ISBN 9781538647080 (doi:10.1109/ICSENS.2018.8589631)
Avgoulas, E.I., Mulvihill, D.M. , Endruweit, A., Sutcliffe, M.P.F., Warrior, N.A., De Focatiis, D.S.A. and Long, A.C. (2018) Frictional behaviour of non-crimp fabrics (NCFs) in contact with a forming tool. Tribology International, 121, pp. 71-77. (doi: 10.1016/j.triboint.2018.01.026)
Sutcliffe, M. P.F., Mulvihill, D. and Smerdova, O. (2018) Friction Between a Dry Fibre Bundle and Rough or Smooth Surfaces. 10th European Solid Mechanics Conference, Bologna, Italy, 2-6 July 2018.
Pu, L. and Unluer, C. (2018) Durability of carbonated MgO concrete containing fly ash and ground granulated blast-furnace slag. Construction and Building Materials, 192, pp. 403-415. (doi: 10.1016/j.conbuildmat.2018.10.121)
Dung, N. T. and Unluer, C. (2018) Improving the carbonation of reactive MgO cement concrete via the use of NaHCO3 and NaCl. Journal of Materials in Civil Engineering, 30(12), 04018320. (doi: 10.1061/(ASCE)MT.1943-5533.0002509)
Ruan, S. and Unluer, C. (2018) Comparison of the environmental impacts of reactive magnesia and calcined dolomite and their performance under different curing conditions. Journal of Materials in Civil Engineering, 30(11), 04018279. (doi: 10.1061/(ASCE)MT.1943-5533.0002471)
Panda, B., Unluer, C. and Tan, M. J. (2018) Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing. Cement and Concrete Composites, 94, pp. 307-314. (doi: 10.1016/j.cemconcomp.2018.10.002)
Sonat, C., Teo, W.W. and Unluer, C. (2018) Performance and microstructure of MgO-SiO2 concrete under different environments. Construction and Building Materials, 184, pp. 549-564. (doi: 10.1016/j.conbuildmat.2018.07.032)
Coopamootoo, K., Davie, C., Masoero, E. and Unluer, C. (2018) Geopolymer cements: Nanoscale Simulations and High Temperature Experiments. 38th Cement and Concrete Science Conference, Coventry, UK, 10-11 September 2018.
Dong, H., Yang, E.-H., Unluer, C. , Jin, F. and Al-Tabbaa, A. (2018) Investigation of the properties of MgO recovered from reject brine obtained from desalination plants. Journal of Cleaner Production, 196, pp. 100-108. (doi: 10.1016/j.jclepro.2018.06.032)
Unluer, C. (2018) Developments in Carbonated Reactive MgO Cement Concrete: Production, Performance and Recycling. Advanced Materials for Sustainable Infrastructure Development, Gordon Research Conference, Hong Kong, 5- 10 August 2018.
Lesimple, A., Dung, N. T., Hay, R., Unluer, C. and Celik, K. (2018) Formation of Hydrate and Carbonate Phases within Reactive Magnesia Cement Systems. 9th Advances in Cement-Based Materials (Cements 2018), University Park, PA, USA, 11-12 June 2018.
Unluer, C. (2018) Influence of Carbonation on the Performance of Reactive MgO Cement-Based Concrete Mixes. 8th Annual International Conference on Civil Engineering, Athens, Greece, 25-28 June 2018.
Ruan, S., Qiu, J., Yang, E.-H. and Unluer, C. (2018) Fiber-reinforced reactive magnesia-based tensile strain-hardening composites. Cement and Concrete Composites, 89, pp. 52-61. (doi: 10.1016/j.cemconcomp.2018.03.002)
Dung, N.T. and Unluer, C. (2018) Development of MgO concrete with enhanced hydration and carbonation mechanisms. Cement and Concrete Research, 103, pp. 160-169. (doi: 10.1016/j.cemconres.2017.10.011)
Dong, H., Unluer, C. , Yang, E.-H. and Al-Tabbaa, A. (2018) Recovery of reactive MgO from reject brine via the addition of NaOH. Desalination, 429, pp. 88-95. (doi: 10.1016/j.desal.2017.12.021)
Unluer, C. (2018) Carbon dioxide sequestration in magnesium-based binders. In: Pacheco-Torgal, F., Shi, C. and Palomo Sanchez, A. (eds.) Carbon Dioxide Sequestration in Cementitious Construction Materials. Series: Woodhead publishing series in civil and structural engineering. Elsevier, pp. 129-173. (doi:10.1016/B978-0-08-102444-7.00007-1)
Dawson, P. R., Boyce, D. E., Park, J.-S., Wielewski, E. and Miller, M. P. (2018) Determining the strengths of HCP slip systems using harmonic analyses of lattice strain distributions. Acta Materialia, 144, pp. 92-106. (doi:10.1016/j.actamat.2017.10.032)
Xiao, Z. and Harrison, P. (2018) Development of a Novel Design Tool and Manufacturing Process for Steered-fibre Laminate Composite Panels. Euromech Colloquium 602 – Composite Manufacturing Processes. Analysis, Modelling and Simulations, Lyon, France, 13-15 Mar 2019. (Accepted for Publication)
Feeney, A. , Kang, L. and Dixon, S. (2018) High frequency measurement of ultrasound using flexural ultrasonic transducers. IEEE Sensors Journal, 18(13), pp. 5238-5244. (doi: 10.1109/JSEN.2018.2835146)
Feeney, A. , Kang, L. and Dixon, S. (2018) Nonlinearity in the dynamic response of flexural ultrasonic transducers. IEEE Sensors Letters, 2(1), 2500104. (doi: 10.1109/LSENS.2017.2779183)
Feeney, A. and Lucas, M. (2018) A comparison of two configurations for a dual-resonance cymbal transducer. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 65(3), pp. 489-496. (doi: 10.1109/TUFFC.2018.2793310)
Feeney, A. , Kang, L., Rowlands, G. and Dixon, S. (2018) The dynamic performance of flexural ultrasonic transducers. Sensors, 18(1), 270. (doi: 10.3390/s18010270)
Kang, L., Feeney, A. and Dixson, S. (2018) Analysis of Influence of Inconsistent Performances of Array Elements on Flexural Ultrasonic Phased Array for Measurement of Ultrasound in Fluids. In: 2018 IEEE International Ultrasonics Symposium (IUS), Kobe, Japan, 22-25 Oct 2018, ISBN 9781538634257 (doi:10.1109/ULTSYM.2018.8580009)
Fotouhi, S., Fotouhi, M. , Pavlovic, A. and Djordjevic, N. (2018) Investigating the pre-damaged PZT sensors under impact traction. Journal of Marine Science and Engineering, 6(4), 142. (doi: 10.3390/jmse6040142)
Saghafi, H., Fotouhi, M. and Minak, G. (2018) Improvement of the impact properties of composite laminates by means of nano-modification of the matrix—a review. Applied Sciences, 8(12), 2406. (doi: 10.3390/app8122406)
Suwarta, P., Czel, G., Fotouhi, M. , Rucerz, J. and Wisnom, M. R. (2018) Pseudo-ductility of Unidirectional Thin Ply Hybrid Composites in Longitudinal Compression. In: 33rd Technical Conference of the American Society for Composites, Seattle, WA, USA, 24-27 Sept 2018, pp. 1032-1041. ISBN 9781510872073
Fotouhi, M. , Jalalvand, M., Wu, X. and Wisnom, M.R. (2018) Bearing and Bypass Bearing of Pseudo-ductile Thin-ply Carbon/Glass Hybrids. 21st International Conference on Composite Structures (ICCS21), Bologna, Italy, 4-7 Sept 2018.
Fotouhi, M. , Jalalvand, M., Wu, X. and Wisnom, M.R. (2018) Compact Tension Test Behaviour of Pseudo-ductile Thin-ply Carbon/Glass Hybrids. 21st International Conference on Composite Structures (ICCS21), Bologna, Italy, 4-7 Sept 2018.
Fotouhi, M. , Jalalvand, M. and Wisnom, M. R. (2018) Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates. Composites Part A: Applied Science and Manufacturing, 110, pp. 29-44. (doi: 10.1016/j.compositesa.2018.04.012)
Sobhani, A., Saeedifar, M., Najafabadi, M. A., Fotouhi, M. and Zarouchas, D. (2018) The study of buckling and post-buckling behavior of laminated composites consisting multiple delaminations using acoustic emission. Thin-Walled Structures, 127, pp. 145-156. (doi: 10.1016/j.tws.2018.02.011)
Bolouri, A. and Fotouhi, M. (2018) High-performance Composite T-joints: Topological Design Strategy Towards Strength Improvement and Weight Reduction. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
De, M., Pozegic, T., Hamerton, I. and Fotouhi, M. (2018) Development and Evaluation of a Novel Piezoelectric PVDF Sensor as a Load Spectrum Counter. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Fotouhi, M. , Jalalvand, M., Prato, A. and Wisnom, M. R. (2018) Thin Ply Carbon/ Glass Hybrid Laminates to Activate New Damage Mechanisms Under Indentation. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Jalalvand, M., Wu, H. W. M. L., Sheibanian, F., Fotouhi, M. and Wisnom, M. R. (2018) Self-warning Hybrid Composite Patches for Repairing Cracked Aluminium Panels. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Wisnom, M. R., Czél, G., Fotouhi, M. , Fuller, J., Jalalvand, M., Rev, T. and Wu, X. (2018) Reduced Notch-Sensitivity in Pseudo-Ductile Thin-Ply Composites. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Wu, X., Fuller, J.D., Fotouhi, M. and Wisnom, M. (2018) Bearing Failure of Pseudo-ductile Thin Ply Angle-ply Laminates. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Saeedifar, M., Ahmadi Najafabadi, M., Mohammadi, K., Fotouhi, M. , Hosseini Toudeshky, H. and Mohammadi, R. (2018) Acoustic emission-based methodology to evaluate delamination crack growth under quasi-static and fatigue loading conditions.Journal of Nondestructive Evaluation, 37(1), 1. (doi: 10.1007/s10921-017-0454-0)
Pashmforoush, F., Fotouhi, M. and Sarhan, A. A. D. (2018) Experimental–numerical study on minimizing impact induced damage in laminated composites under low-velocity impact. Journal of Reinforced Plastics and Composites, 37(3), pp. 155-165. (doi: 10.1177/0731684417737166)
Czél, G., Rev, T., Jalalvand, M., Fotouhi, M. , Longana, M. L., Nixon-Pearson, O. J. and Wisnom, M. R. (2018) Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon/epoxy thin-ply hybrid composites. Composites Part A: Applied Science and Manufacturing, 104, pp. 151-164. (doi: 10.1016/j.compositesa.2017.10.028)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M. (2018) Acoustic emission monitoring of thin ply hybrid composites under repeated quasi-static tensile loading. FME Transactions, 46, pp. 238-244. (doi: 10.5937/fmet1802238F)
Sadeghi, S., Karimi, Z., Fotouhi, M. , Hasani, M., Najafabadi, M. A. and Pavlović, A. (2018) Residual stress evaluation in friction stir welding of aluminium plates by means of acoustic emission and ultrasonic waves. FME Transactions, 46, pp. 230-237. (doi: 10.5937/fmet1802230S)
Gallipoli, D., Grassl, P. , Wheeler, S. and Gens, A. (2018) On the choice of stress–strain variables for unsaturated soils and its effect on plastic flow. Geomechanics for Energy and the Environment, 15, pp. 3-9. (doi: 10.1016/j.gete.2018.02.002)
Grassl, P. , Johansson, M. and Leppänen, J. (2018) On the numerical modelling of bond for the failure analysis of reinforced concrete. Engineering Fracture Mechanics, 189, pp. 13-26. (doi: 10.1016/j.engfracmech.2017.10.008)
Grassl, P. and Antonelli, A. (2018) Network Modelling of Fracture Processes in Fibre-Reinforced Quasi-Brittle Materials. In: Conference on Computational Modelling of Concrete and Concrete Structures (EURO-C 2018), Bad Hofgastein, Austria, 26 Feb - 1 Mar 2018, pp. 55-61. ISBN 9781138741171
Athanasiadis, I., Wheeler, S. J. and Grassl, P. (2018) Hydro-mechanical network modelling of particulate composites. International Journal of Solids and Structures, 130-31, pp. 49-60. (doi: 10.1016/j.ijsolstr.2017.10.017)
Chen, S. et al. (2018) On the limits of scalpel AFM for the 3D electrical characterization of nanomaterials. Advanced Functional Materials, 28(52), 1802266. (doi: 10.1002/adfm.201802266)
Harrison, P. , Alvarez, M. F. and Anderson, D. (2018) Towards comprehensive characterisation and modelling of the forming and wrinkling mechanics of engineering fabrics. International Journal of Solids and Structures, 154, pp. 2-18.(doi:10.1016/j.ijsolstr.2016.11.008)
Giorgio, I., Harrison, P., dell’Isola, F., Alsayednoor, J. and Turco, E. (2018) Wrinkling in engineering fabrics: a comparison between two different comprehensive modelling approaches. Proceedings of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 474(2216), 20180063. (doi:10.1098/rspa.2018.0063)
Harrison, P., Fernandez Alvarez, M., Correia, N., Mimoso, P., Cristovao, C. and Gomes, R. (2018) Characterising the forming mechanics of pre-consolidated nylon-carbon composite. In: ECCM 18: 18th European Conference on Composite Materials, Athens, Greece, 24-28 June 2018, (Accepted for Publication)
Harrison, P., Taylor, E. and Alsayednoor, J. (2018) Improving the accuracy of the uniaxial bias extension test on engineering fabrics using a simple wrinkle mitigation technique. Composites Part A: Applied Science and Manufacturing, 108, pp. 53-61. (doi:10.1016/j.compositesa.2018.02.025)
Rajkumar, A. R. and Shanmugam, K. (2018) Additive manufacturing-enabled shape transformations via FFF 4D printing. Journal of Materials Research, 33(24), pp. 4362-4376. (doi: 10.1557/jmr.2018.397)
Dugbenoo, E., Arif, M. F., Wardle, B. L. and Kumar, S. (2018) Enhanced bonding via additive manufacturing-enabled surface tailoring of 3D printed continuous-fiber composites. Advanced Engineering Materials, 20(12), 1800691. (doi: 10.1002/adem.201800691)
Patole, S. P., Arif, M. F. and Kumar, S. (2018) Polyvinyl alcohol incorporated buckypaper composites for improved multifunctional performance. Composites Science and Technology, 168, pp. 429-436. (doi: 10.1016/j.compscitech.2018.10.010)
Kavitha, T. and Kumer, S. (2018) Turning date palm fronds into biocompatible mesoporous fluorescent carbon dots. Scientific Reports, 8, 16269. (doi: 10.1038/s41598-018-34349-z) (PMID:30257078) (PMCID:PMC6492006)
Reddy, S.K., Kumar, S., Varadarajan, K.M., Marpu, P.R., Gupta, T. K. and Choosri, M. (2018) Strain and damage-sensing performance of biocompatible smart CNT/UHMWPE nanocomposites. Materials Science and Engineering C: Materials for Biological Applications, 92, pp. 957-968. (doi: 10.1016/j.msec.2018.07.029)
Khan, M.A., Kumar, S. and Cantwell, W. J. (2018) Additively manufactured cylindrical systems with stiffness-tailored interface: Modeling and experiments. International Journal of Solids and Structures, 152-15, pp. 71-84. (doi: 10.1016/j.ijsolstr.2018.06.002)
Khan, M.A., Kumar, S. and Reddy, J.N. (2018) Material-tailored adhesively bonded multilayers: A theoretical analysis. International Journal of Mechanical Sciences, 148, pp. 246-262. (doi: 10.1016/j.ijmecsci.2018.08.017)
Arif, M. F., Kumar, S., Gupta, T. K. and Varadarajan, K. M. (2018) Strong linear-piezoresistive-response of carbon nanostructures reinforced hyperelastic polymer nanocomposites. Composites Part A: Applied Science and Manufacturing, 113, pp. 141-149.(doi: 10.1016/j.compositesa.2018.07.021)
Ubaid, J., Wardle, B. L. and Kumar, S. (2018) Strength and performance enhancement of multilayers by spatial tailoring of adherend compliance and morphology via multimaterial jetting additive manufacturing. Scientific Reports, 8, 13592. (doi: 10.1038/s41598-018-31819-2) (PMID:30206331) (PMCID:PMC6134147)
Arif, M.F., Kumar, S., Varadarajan, K.M. and Cantwell, W.J. (2018) Performance of biocompatible PEEK processed by fused deposition additive manufacturing. Materials and Design, 146, pp. 249-259. (doi: 10.1016/j.matdes.2018.03.015)
Khan, M.A. and Kumar, S. (2018) Performance enhancement of tubular multilayers via compliance-tailoring: 3D printing, testing and modeling. International Journal of Mechanical Sciences, 140, pp. 93-108. (doi: 10.1016/j.ijmecsci.2018.02.038)
Kumar, S., Wardle, B. L., Arif, M. F. and Ubaid, J. (2018) Stress reduction of 3D printed compliance-tailored multilayers. Advanced Engineering Materials, 20(1), 1700883. (doi: 10.1002/adem.201700883)
Wang, Z., Li, P. and Song, W. (2018) Inelastic deformation micromechanism and modified fragmentation model for silicon carbide under dynamic compression. Materials and Design, 157, pp. 244-250. (doi:10.1016/j.matdes.2018.07.032)
Badica, P., Batalu, D., Burdusel, M., Grigoroscuta, M. A., Aldica, G. V., Enculescu, M., Gabor, R. A., Wang, Z., Huang, R. and Li, P. (2018) Compressive properties of pristine and SiC-Te-added MgB 2 powders, green compacts and spark-plasma-sintered bulks. Ceramics International, 44(9), pp. 10181-10191. (doi:10.1016/j.ceramint.2018.03.008)
Wang, Z. and Li, P. (2018) Characterisation and constitutive model of tensile properties of selective laser melted Ti-6Al-4V struts for microlattice structures. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 725, pp. 350-358.(doi:10.1016/j.msea.2018.04.006)
Zhang, Y., Guo, Z., Lv, J. and Liu, Y. (2018) A framework for smart production-logistics systems based on CPS and industrial IoT. IEEE Transactions on Industrial Informatics, 14(9), pp. 4019-4032. (doi:10.1109/TII.2018.2845683)
Lv, J., Tang, R., Tang, W., Jia, S., Liu, Y. and Cao, Y. (2018) An investigation into methods for predicting material removal energy consumption in turning.Journal of Cleaner Production, 193, pp. 128-139. (doi:10.1016/j.jclepro.2018.05.035)
Liu, Y. , Farnsworth, M. and Tiwari, A. (2018) Energy-efficient scheduling of flexible flow shop of composite recycling. International Journal of Advanced Manufacturing Technology, 97(1-4), pp. 117-127. (doi:10.1007/s00170-018-1852-x)
Hu, L., Tang, R., Liu, Y. , Cao, Y. and Tiwari, A. (2018) Optimising the machining time, deviation and energy consumption through a multi-objective feature sequencing approach. Energy Conversion and Management, 160, pp. 126-140.(doi:10.1016/j.enconman.2018.01.005)
McBride, A.T. , Reddy, B.D. and Steinmann, P. (2018) Dissipation-consistent modelling and classification of extended plasticity formulations.Journal of the Mechanics and Physics of Solids, 119, pp. 118-139. (doi:10.1016/j.jmps.2018.06.002)
Pond, D., McBride, A.T. , Davids, L.M., Reddy, B.D. and Limbert, G. (2018) Microstructurally-based constitutive modelling of the skin – linking intrinsic ageing to microstructural parameters. Journal of Theoretical Biology, 444, pp. 108-123. (doi:10.1016/j.jtbi.2018.01.014) (PMID:29407269)
de Villiers, A.M., McBride, A.T. , Reddy, B.D., Franz, T. and Spottiswoode, B.S. (2018) A validated patient-specific FSI model for vascular access in haemodialysis. Biomechanics and Modeling in Mechanobiology, 17(2), pp. 479-497. (doi:10.1007/s10237-017-0973-8) (PMID:29139052)
Min, G., Manjakkal, L. , Mulvihill, D. M. and Dahiya, R. S. (2018) Enhanced Triboelectric Nanogenerator Performance via an Optimised Low Permittivity, Low Thickness Substrate. In: IEEE Sensors Conference, New Delhi, India, 28-31 Oct 2018, ISBN 9781538647080 (doi:10.1109/ICSENS.2018.8589631)
Avgoulas, E.I., Mulvihill, D.M. , Endruweit, A., Sutcliffe, M.P.F., Warrior, N.A., De Focatiis, D.S.A. and Long, A.C. (2018) Frictional behaviour of non-crimp fabrics (NCFs) in contact with a forming tool. Tribology International, 121, pp. 71-77. (doi: 10.1016/j.triboint.2018.01.026)
Sutcliffe, M. P.F., Mulvihill, D. and Smerdova, O. (2018) Friction Between a Dry Fibre Bundle and Rough or Smooth Surfaces. 10th European Solid Mechanics Conference, Bologna, Italy, 2-6 July 2018.
Pu, L. and Unluer, C. (2018) Durability of carbonated MgO concrete containing fly ash and ground granulated blast-furnace slag. Construction and Building Materials, 192, pp. 403-415. (doi: 10.1016/j.conbuildmat.2018.10.121)
Dung, N. T. and Unluer, C. (2018) Improving the carbonation of reactive MgO cement concrete via the use of NaHCO3 and NaCl. Journal of Materials in Civil Engineering, 30(12), 04018320. (doi: 10.1061/(ASCE)MT.1943-5533.0002509)
Ruan, S. and Unluer, C. (2018) Comparison of the environmental impacts of reactive magnesia and calcined dolomite and their performance under different curing conditions. Journal of Materials in Civil Engineering, 30(11), 04018279. (doi: 10.1061/(ASCE)MT.1943-5533.0002471)
Panda, B., Unluer, C. and Tan, M. J. (2018) Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing. Cement and Concrete Composites, 94, pp. 307-314. (doi: 10.1016/j.cemconcomp.2018.10.002)
Sonat, C., Teo, W.W. and Unluer, C. (2018) Performance and microstructure of MgO-SiO2 concrete under different environments. Construction and Building Materials, 184, pp. 549-564. (doi: 10.1016/j.conbuildmat.2018.07.032)
Coopamootoo, K., Davie, C., Masoero, E. and Unluer, C. (2018) Geopolymer cements: Nanoscale Simulations and High Temperature Experiments. 38th Cement and Concrete Science Conference, Coventry, UK, 10-11 September 2018.
Dong, H., Yang, E.-H., Unluer, C. , Jin, F. and Al-Tabbaa, A. (2018) Investigation of the properties of MgO recovered from reject brine obtained from desalination plants. Journal of Cleaner Production, 196, pp. 100-108. (doi: 10.1016/j.jclepro.2018.06.032)
Unluer, C. (2018) Developments in Carbonated Reactive MgO Cement Concrete: Production, Performance and Recycling. Advanced Materials for Sustainable Infrastructure Development, Gordon Research Conference, Hong Kong, 5- 10 August 2018.
Lesimple, A., Dung, N. T., Hay, R., Unluer, C. and Celik, K. (2018) Formation of Hydrate and Carbonate Phases within Reactive Magnesia Cement Systems. 9th Advances in Cement-Based Materials (Cements 2018), University Park, PA, USA, 11-12 June 2018.
Unluer, C. (2018) Influence of Carbonation on the Performance of Reactive MgO Cement-Based Concrete Mixes. 8th Annual International Conference on Civil Engineering, Athens, Greece, 25-28 June 2018.
Ruan, S., Qiu, J., Yang, E.-H. and Unluer, C. (2018) Fiber-reinforced reactive magnesia-based tensile strain-hardening composites. Cement and Concrete Composites, 89, pp. 52-61. (doi: 10.1016/j.cemconcomp.2018.03.002)
Dung, N.T. and Unluer, C. (2018) Development of MgO concrete with enhanced hydration and carbonation mechanisms. Cement and Concrete Research, 103, pp. 160-169. (doi: 10.1016/j.cemconres.2017.10.011)
Dong, H., Unluer, C. , Yang, E.-H. and Al-Tabbaa, A. (2018) Recovery of reactive MgO from reject brine via the addition of NaOH. Desalination, 429, pp. 88-95. (doi: 10.1016/j.desal.2017.12.021)
Unluer, C. (2018) Carbon dioxide sequestration in magnesium-based binders. In: Pacheco-Torgal, F., Shi, C. and Palomo Sanchez, A. (eds.) Carbon Dioxide Sequestration in Cementitious Construction Materials. Series: Woodhead publishing series in civil and structural engineering. Elsevier, pp. 129-173. (doi:10.1016/B978-0-08-102444-7.00007-1)
Dawson, P. R., Boyce, D. E., Park, J.-S., Wielewski, E. and Miller, M. P. (2018) Determining the strengths of HCP slip systems using harmonic analyses of lattice strain distributions. Acta Materialia, 144, pp. 92-106. (doi:10.1016/j.actamat.2017.10.032)
Xiao, Z. and Harrison, P. (2018) Development of a Novel Design Tool and Manufacturing Process for Steered-fibre Laminate Composite Panels. Euromech Colloquium 602 – Composite Manufacturing Processes. Analysis, Modelling and Simulations, Lyon, France, 13-15 Mar 2019. (Accepted for Publication)
2017
Barbera, D., Chen, H. and Liu, Y. (2017) Advances on creep–fatigue damage assessment in notched components. Fatigue and Fracture of Engineering Materials and Structures, 40(11), pp. 1854-1867.(doi:10.1111/ffe.12603)
Barbera, D., Chen, H., Liu, Y. and Xuan, F. (2017) Recent developments of the linear matching method framework for structural integrity assessment. Journal of Pressure Vessel Technology, 139(5), 051101.(doi:10.1115/1.4036919)
Giugliano, D., Barbera, D. and Chen, H. (2017) Effect of fiber cross section geometry on cyclic plastic behavior of continuous fiber reinforced aluminum matrix composites. European Journal of Mechanics - A/Solids, 61, pp. 35-46. (doi:10.1016/j.euromechsol.2016.09.002)
Barbera, D., Chen, H. and Luan, W. (2017) Direct Method on Creep Fatigue Damage Assessment Considering Full Creep-Cyclic Plasticity Interaction. In: ASME 2017 Pressure Vessels and Piping Conference, Waikoloa, HI, USA, 16-20 Jul 2017, V06AT06A063. ISBN 9780791857991 (doi:10.1115/PVP2017-65080)
Feeney, A. , Kang, L. and Dixon, S. (2017) HiFFUTs for High Temperature Ultrasound. In: 2017 International Congress on Ultrasonics, Honolulu, HI, USA, 18-20 Dec 2017, 045003. (doi:10.1121/2.0000685)
Feeney, A. , Kang, L., Rowlands, G. and Dixon, S. (2017) Dynamic Characteristics of Flexural Ultrasonic Transducers. In: 2017 International Congress on Ultrasonics, Honolulu, HI, USA, 18-20 Dec 2017, 045002. (doi:10.1121/2.0000684)
Kang, L., Feeney, A. and Dixon, S. (2017) Flow Measurement Based on Two-Dimensional Flexural Ultrasonic Phased Arrays. In: 2017 International Congress on Ultrasonics, Honolulu, HI, USA, 18-20 Dec 2017, 045012. (doi:10.1121/2.0000708)
Feeney, A. and Kupnik, M. (2017) Flexural Ultrasonic Phased Array for Compensation of Beam Drift Effect of Flow Measurement. 3rd Flow Measurement Institute Conference, Coventry, UK, 11 Jul 2017.
Feeney, A. , Kang, L., Rowlands, G. and Dixon, S. (2017) Electro-mechanical Analysis of Flexural Transducers. 3rd Flow Measurement Institute Conference, Coventry, UK, 11 Jul 2017.
Dixon, S., Kang, L., Ginestier, M., Wells, C., Rowlands, G. and Feeney, A. (2017) The electro-mechanical behaviour of flexural ultrasonic transducers. Applied Physics Letters, 110(22), 223502. (doi: 10.1063/1.4984239)
Feeney, A. (2017) Five amazing ultrasound inventions set to change the world (and not a pregnancy scan in sight). Conversation, 12 May.
Feeney, A. , Sikaneta, S., Harkness, P. and Lucas, M. (2017) Ultrasonic compaction of granular geological materials. Ultrasonics, 76, pp. 136-144. (doi: 10.1016/j.ultras.2017.01.004) (PMID:28088705)
Kang, L., Feeney, A. , Su, R., Lines, D., Jäger, A., Wang, H., Arnaudov, Y., Ramadas, S. N., Kupnik, M. and Dixon, S. (2017) Two-Dimensional Flexural Ultrasonic Phased Array for Flow Measurement. In: 2017 IEEE International Ultrasonics Symposium (IUS), Washington, D.C., USA, 6-9 Sept 2017, ISBN 9781538633830 (doi:10.1109/ULTSYM.2017.8092220)
Jalalvand, M., Fotouhi, M. and Wisnom, M. R. (2017) Orientation-dispersed pseudo-ductile hybrid composite laminates – a new lay-up concept to avoid free-edge delamination. Composites Science and Technology, 153, pp. 232-240. (doi: 10.1016/j.compscitech.2017.10.011)
Fotouhi, M. , Jalalvand, M. and Wisnom, M. R. (2017) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour in all fibre orientations. Composites Science and Technology, 152, pp. 101-110. (doi: 10.1016/j.compscitech.2017.08.024)
Zarif Karimi, N., Heidary, H., Fotouhi, M. and Minak, G. (2017) Experimental analysis of GFRP laminates subjected to compression after drilling. Composite Structures, 169, pp. 144-152. (doi: 10.1016/j.compstruct.2017.01.017)
Fotouhi, M. , Sadeghi, S., Jalalvand, M. and Ahmadi, M. (2017) Analysis of the damage mechanisms in mixed-mode delamination of laminated composites using acoustic emission data clustering. Journal of Thermoplastic Composite Materials, 30(3), pp. 318-340. (doi: 10.1177/0892705715598362)
Fotouhi, M. , Sadeghi, S., Jalalvand, M. and Ahmadi, M. (2017) Analysis of the damage mechanisms in mixed-mode delamination of laminated composites using acoustic emission data clustering. Journal of Thermoplastic Composite Materials, 30(3), pp. 318-340. (doi: 10.1177/0892705715598362)
Fotouhi, M. , Saghafi, H., Brugo, T., Minak, G., Fragassa, C., Zucchelli, A. and Ahmadi, M. (2017) Effect of PVDF nanofibers on the fracture behavior of composite laminates for high-speed woodworking machines. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 231(1), pp. 31-43. (doi: 10.1177/0954406216650711)
Fotouhi, M. , Jalalvand, I. and Wisnom, M. (2017) Demonstration of Pseudo-ductility in High Performance Quasi-isotropic Thin Ply Carbon/glass Hybrid Composites. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Fotouhi, M. , Jalalvand, M., Longana, M., Fuller, J. and Wisnom, M.R. (2017) The High Strain Rate Tension Behaviour of Pseudo-ductile High Performance Thin Ply Carbon/Glass Hybrid Composites. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
Fotouhi, M. , Saeedifar, M., Yousefi, J. and Fotouhi, S. (2017) Application of acoustic emission technique in delamination of laminated composites. In: Barile, C. and Pappalettera, G. (eds.) Focus on Acoustic Emission Research. Nova Science Publishers. ISBN 9781536118483
Fotouhi, M. , Xiao, B., Pozegic, T., Jalalvand, M., Hamerton, I. and Wisnom, M. (2017) High Performance Piezo Electric Nanocomposite Sensor Nodes for Structural Health Monitoring. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Jalalvand, I., Fotouhi, M. , Leong, M. C. and Wisnom, M. (2017) A Novel Technique to Accurately Measure the Fibre Failure Strain in Composite Laminates Under a Combined In-plane Tension and Shear Stress State. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Leong, M.C., Fotouhi, M. , Jalalvand, M., Sun, X.C. and Wisnom, M.R. (2017) A Comparison of Damage Mechanisms in Scaled Static Indentation Tests on Glass and Carbon Fibre Laminates. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
Suwart, P., Fotouhi, M. , Czel, G. and Wisnom, M. (2017) Fatigue Behaviour of Pseudo-ductile Thin Ply Hybrid Composites. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Zarif, N., Fotouhi, M. and Minak, G. (2017) A Thrust and Feed Prediction Model for Drilling of Composite Materials. In: 3rd International Conference on Mechanics of Composites (MECHCOMP3), Bologna, Italy, 4-7 July 2017, ISBN 9788893850292(doi:10.15651/978-88-9385-029-2)
Zarif, N., Fotouhi, M. , Heidary, H. and Minak, G. (2017) Effect of Hole Machining Damages on Bending Strength of Composite Laminates. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
Fahy, C., Wheeler, S. J. , Gallipoli, D. and Grassl, P. (2017) Corrosion induced cracking modelled by a coupled transport-structural approach. Cement and Concrete Research, 94, pp. 24-35. (doi: 10.1016/j.cemconres.2017.01.007)
Pan, C., Shi, Y., Hui, F., Grustan Gutierrez, E. and Lanza, M. (2017) History and status of the CAFM. In: Lanza, M. (ed.) Conductive Atomic Force Microscopy: Applications in Nanomaterials. Wiley - V C H Verlag GmbH & Co. KGaA, pp. 1-28. ISBN 9783527340910 (doi:10.1002/9783527699773.ch1)
Hui, F., Grustan Gutierrez, E. , Long, S., Lui, Q., Ott, A. K., Ferrari, A. C. and Lanzo, M. (2017) 2D resistive switching memories: graphene and related materials for Resistive Random Access Memories. Advanced Electronic Materials, 3(8), (doi: 10.1002/aelm.201770032)
Hui, F., Grustan Gutierrez, E. , Long, S., Liu, Q., Ott, A. K., Ferrari, A. C. and Lanza, M. (2017) Graphene and related materials for resistive random access memories. Advanced Electronic Materials, 3(8), 1600195. (doi: 10.1002/aelm.201600195)
Grustan Gutierrez, E. and Gamero-Castaño, M. (2017) Microfabricated electrospray thruster array with high hydraulic resistance channels. Journal of Propulsion and Power, 33(4), pp. 984-992. (doi: 10.2514/1.b36268)
Hui, F., Vajha, P., Ji, Y., Pan, C., Grustan Gutierrez, E. , Duan, H., He, P., Ding, G., Shi, Y. and Lanza, M. (2017) Variability of graphene devices fabricated using graphene inks: Atomic force microscope tips. Surface and Coatings Technology, 320, pp. 391-395. (doi: 10.1016/j.surfcoat.2016.12.020)
Jiang, L. et al. (2017) High-resolution characterization of hexagonal boron nitride coatings exposed to aqueous and air oxidative environments. Nano Research, 10(6), pp. 2046-2055. (doi: 10.1007/s12274-016-1393-2)
Song, X. et al. (2017) Enhanced piezoelectric effect at the edges of stepped molybdenum disulfide nanosheets. Nanoscale, 9(19), pp. 6189-6608. (doi: 10.1039/c6nr09275f) (PMID:28338700)
Grustan Gutierrez, E. , Wei, C., Wang, B. and Lanza, M. (2017) Sputtering and amorphization of crystalline semiconductors by Nanodroplet Bombardment. Crystal Research and Technology, 52(1), 1600240. (doi: 10.1002/crat.201600240)
Alsayednoor, J., Lennard, F. , Yu, W.R. and Harrison, P. (2017) Influence of specimen pre-shear and wrinkling on the accuracy of uniaxial bias extension test results. Composites Part A: Applied Science and Manufacturing, 101, pp. 81-97. (doi:10.1016/j.compositesa.2017.06.006)
Big-Alabo, A., Cartmell, M. P. and Harrison, P. (2017) On the solution of asymptotic impact problems with significant localised indentation.Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 231(5), pp. 807-822.(doi:10.1177/0954406216628556)
Harrison, P., Alvarez, M. F. and Anderson, D. (2017) Towards comprehensive characterisation and modelling of the forming and wrinkling mechanics of engineering fabrics. International Journal of Solids and Structures, (doi:10.1016/j.ijsolstr.2016.11.008) (Early Online Publication)
Kumar, S., Pal, G. and Shah, T. (2017) High performance overhead power lines with carbon nanostructures for transmission and distribution of electricity from renewable sources. Journal of Cleaner Production, 145, pp. 180-187. (doi: 10.1016/j.jclepro.2017.01.053)
Kumar, S., Wardle, B. L. and Arif, M. F. (2017) Strength and performance enhancement of bonded joints by spatial tailoring of adhesive compliance via 3D printing. ACS Applied Materials and Interfaces, 9(1), pp. 884-891. (doi: 10.1021/acsami.6b13038)
Wang, Z. and Li, P. (2017) Voronoi cell finite element modelling of the intergranular fracture mechanism in polycrystalline alumina. Ceramics International, 43(9), pp. 6967-6975. (doi:10.1016/j.ceramint.2017.02.121)
Ho, N. S. K., Li, P., Raghavan, S. and Li, T. (2017) The effect of slurry composition on the microstructure and mechanical properties of open-cell Inconel foams manufactured by the slurry coating technique. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 687, pp. 123-130. (doi:10.1016/j.msea.2017.01.038)
Yao, X., Zhou, J., Lin, Y., Li, Y., Yu, H. and Liu, Y. (2017) Smart manufacturing based on cyber-physical systems and beyond. Journal of Intelligent Manufacturing, (doi:10.1007/s10845-017-1384-5) (Early Online Publication)
Hu, L., Liu, Y. , Lohse, N., Tang, R., Lv, J., Peng, C. and Evans, S. (2017) Sequencing the features to minimise the non-cutting energy consumption in machining considering the change of spindle rotation speed. Energy, 139, pp. 935-946.(doi:10.1016/j.energy.2017.08.032)
Jia, S., Yuan, Q., Lv, J., Liu, Y. , Ren, D. and Zhang, Z. (2017) Therblig-embedded value stream mapping method for lean energy machining. Energy, 138, pp. 1081-1098. (doi:10.1016/j.energy.2017.07.120)
Zhang, Y., Qian, C., Lv, J. and Liu, Y. (2017) Agent and cyber-physical system based self-organizing and self-adaptive intelligent shopfloor. IEEE Transactions on Industrial Informatics, 13(2), pp. 737-747. (doi:10.1109/TII.2016.2618892)
Hu, L., Peng, C., Evans, S., Peng, T., Liu, Y. , Tang, R. and Tiwari, A. (2017) Minimising the machining energy consumption of a machine tool by sequencing the features of a part. Energy, 121, pp. 292-305. (doi:10.1016/j.energy.2017.01.039)
Lv, J., Tang, R., Tang, W., Liu, Y. , Zhang, Y. and Jia, S. (2017) An investigation into reducing the spindle acceleration energy consumption of machine tools.Journal of Cleaner Production, 143, pp. 794-803. (doi:10.1016/j.jclepro.2016.12.045)
Liu, Y. , Farnsworth, M. and Tiwari, A. (2017) A review of optimisation techniques used in the composite recycling area: state-of-the-art and steps towards a research agenda. Journal of Cleaner Production, 140, pp. 1775-1781.(doi:10.1016/j.jclepro.2016.08.038)
Wilmers, J., McBride, A. and Bargmann, S. (2017) Interface elasticity effects in polymer-filled nanoporous metals. Journal of the Mechanics and Physics of Solids, 99, 163 - 177.(doi:10.1016/j.jmps.2016.11.011)
Carstensen, C., Ebobisse, F., McBride, A.T. , Reddy, B.D. and Steinmann, P. (2017) Some properties of the dissipative model of strain-gradient plasticity. Philosophical Magazine, 97(10), pp. 693-717. (doi:10.1080/14786435.2016.1274836)
Carstensen, C., Ebobisse, F., McBride, A. T. , Reddy, B. D. and Steinmann, P. (2017) Flow relations and yield functions for dissipative strain-gradient plasticity. In: dell'Isola, F., Sofonea, M. and Steigmann, D. (eds.) Mathematical Modelling in Solid Mechanics. Series: Advanced structured materials (69). Springer Singapore, pp. 31-42. ISBN 9789811037634 (doi:10.1007/978-981-10-3764-1_3)
Kartal, M.E., Dugdale, L.H., Harrigan, J.J., Siddiq, M.A., Pokrajac, D. and Mulvihill, D.M. (2017) Three-dimensional in situ observations of compressive damage mechanisms in syntactic foam using X-ray microcomputed tomography. Journal of Materials Science, 52(17), pp. 10186-10197. (doi: 10.1007/s10853-017-1177-4)
Mulvihill, D. M. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Experimental Observations on the Friction of Textile Fibres Relevant to Carbon Fibre Composite Forming. 12th BSSM Conference, Sheffield, UK, 29-31 Aug 2017.
Mulvihill, D. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Friction of Fibrous Tows. 6th European Conference on Tribology (ECOTRIB), Ljubljana, Slovenia, 7-9 June 2017.
Mulvihill, D. M. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Friction of carbon fibre tows. Composites Part A: Applied Science and Manufacturing, 93, pp. 185-198. (doi: 10.1016/j.compositesa.2016.08.034)
Mulvihill, D. M. and Sutcliffe, M. P.F. (2017) Effect of tool surface topography on friction with carbon fibre tows for composite fabric forming. Composites Part A: Applied Science and Manufacturing, 93, pp. 199-206. (doi: 10.1016/j.compositesa.2016.10.017)
Sonat, C., Lim, C.H., Liska, M. and Unluer, C. (2017) Recycling and reuse of reactive MgO cements – A feasibility study. Construction and Building Materials, 157, pp. 172-181. (doi: 10.1016/j.conbuildmat.2017.09.068)
Ruan, S., Liu, J., Yang, E.-H. and Unluer, C. (2017) Performance and microstructure of calcined dolomite and reactive magnesia-based concrete samples. Journal of Materials in Civil Engineering, 29(12), 04017236. (doi: 10.1061/(ASCE)MT.1943-5533.0002103)
Sonat, C., Dung, N.T. and Unluer, C. (2017) Performance and microstructural development of MgO–SiO2 binders under different curing conditions. Construction and Building Materials, 154, pp. 945-955. (doi: 10.1016/j.conbuildmat.2017.08.020)
Unluer, C. and Sonat, C. (2017) Influence of Mix Design on the Performance of MgO-SiO2 Concrete Samples. 2nd ACF Symposium, Innovations for Sustainable Concrete Infrastructures, Chiang Mai, Thailand, 23-25 November 2017.
Dung, N.T. and Unluer, C. (2017) Influence of nucleation seeding on the performance of carbonated MgO formulations. Cement and Concrete Composites, 83, pp. 1-9. (doi: 10.1016/j.cemconcomp.2017.07.005)
Sonat, C. and Unluer, C. (2017) Investigation of the performance and thermal decomposition of MgO and MgO-SiO2 formulations. Thermochimica Acta, 655, pp. 251-261. (doi: 10.1016/j.tca.2017.07.009)
Dung, N.T. and Unluer, C. (2017) Carbonated MgO concrete with improved performance: The influence of temperature and hydration agent on hydration, carbonation and strength gain. Cement and Concrete Composites, 82, pp. 152-164. (doi: 10.1016/j.cemconcomp.2017.06.006)
Ruan, S. and Unluer, C. (2017) Investigation of Strength Gain and Environmental Impacts of Reactive MgO Cement-Based Concrete Mixes. 37th Cement and Concrete Science Conference, London, UK, 11-12 September 2017.
Sonat, C. and Unluer, C. (2017) Investigation of the Mechanical Properties of MgO-SiO2 Binders. 37th Cement and Concrete Science Conference, London, UK, 11-12 September 2017.
Unluer, C. (2017) Influence of Calcination Conditions on the Properties of MgO. International Conference on Advances in Construction Materials and Systems, Chennai, India, 3-8 September 2017.
Unluer, C. (2017) Properties of Reactive Magnesia Cement under Different Calcination Conditions. 37th Cement and Concrete Science Conference, London, UK, 11-12 September 2017.
Ruan, S. and Unluer, C. (2017) Influence of supplementary cementitious materials on the performance and environmental impacts of reactive magnesia cement concrete. Journal of Cleaner Production, 159, pp. 62-73. (doi: 10.1016/j.jclepro.2017.05.044)
Dung, N.T. and Unluer, C. (2017) Sequestration of CO 2 in reactive MgO cement-based mixes with enhanced hydration mechanisms. Construction and Building Materials, 143, pp. 71-82. (doi: 10.1016/j.conbuildmat.2017.03.038)
Ruan, S. and Unluer, C. (2017) Effect of air entrainment on the performance of reactive MgO and PC mixes. Construction and Building Materials, 142, pp. 221-232. (doi: 10.1016/j.conbuildmat.2017.03.068)
Ruan, S. and Unluer, C. (2017) Influence of mix design on the carbonation, mechanical properties and microstructure of reactive MgO cement-based concrete. Cement and Concrete Composites, 80, pp. 104-114. (doi: 10.1016/j.cemconcomp.2017.03.004)
Fasihnikoutalab, M. H., Asadi, A., Unluer, C. , Huat, B. K., Ball, R. J. and Pourakbar, S. (2017) Utilization of alkali-activated olivine in soil stabilization and the effect of carbonation on unconfined compressive strength and microstructure. Journal of Materials in Civil Engineering, 29(6), 06017002. (doi: 10.1061/(ASCE)MT.1943-5533.0001833)
Dong, H., Unluer, C. , Yang, E.-H. and Al-Tabbaa, A. (2017) Synthesis of reactive MgO from reject brine via the addition of NH4OH. Hydrometallurgy, 169, pp. 165-172. (doi: 10.1016/j.hydromet.2017.01.010)
Unluer, C. (2017) Investigating the Carbonation and Mechanical Performance of Reactive MgO Cement Based Mixes. 11th High Performance Concrete (HPC) and 2nd Concrete Innovation Conference (CIC), Tromso, Norway, 6-8 March 2017.
Unluer, C. (2017) Carbonation and Mechanical Performance of Reactive Magnesia Based Formulations. 19th International Conference on Sustainable Building Materials and Construction Technologies (ICSBMCT 2017), Barcelona, Spain, February 2017.
Rheinheimer, V., Unluer, C. , Liu, J., Ruan, S., Pan, J. and Monteiro, P. (2017) XPS study on the stability and transformation of hydrate and carbonate phases within MgO systems. Materials, 10(1), 75. (doi: 10.3390/ma10010075)
Wielewski, E. , Boyce, D. E., Park, J.-S., Miller, M. P. and Dawson, P. R. (2017) A methodology to determine the elastic moduli of crystals by matching experimental and simulated lattice strain pole figures using discrete harmonics. Acta Materialia, 126, pp. 469-480. (doi:10.1016/j.actamat.2016.12.026)
Barbera, D., Chen, H., Liu, Y. and Xuan, F. (2017) Recent developments of the linear matching method framework for structural integrity assessment. Journal of Pressure Vessel Technology, 139(5), 051101.(doi:10.1115/1.4036919)
Giugliano, D., Barbera, D. and Chen, H. (2017) Effect of fiber cross section geometry on cyclic plastic behavior of continuous fiber reinforced aluminum matrix composites. European Journal of Mechanics - A/Solids, 61, pp. 35-46. (doi:10.1016/j.euromechsol.2016.09.002)
Barbera, D., Chen, H. and Luan, W. (2017) Direct Method on Creep Fatigue Damage Assessment Considering Full Creep-Cyclic Plasticity Interaction. In: ASME 2017 Pressure Vessels and Piping Conference, Waikoloa, HI, USA, 16-20 Jul 2017, V06AT06A063. ISBN 9780791857991 (doi:10.1115/PVP2017-65080)
Feeney, A. , Kang, L. and Dixon, S. (2017) HiFFUTs for High Temperature Ultrasound. In: 2017 International Congress on Ultrasonics, Honolulu, HI, USA, 18-20 Dec 2017, 045003. (doi:10.1121/2.0000685)
Feeney, A. , Kang, L., Rowlands, G. and Dixon, S. (2017) Dynamic Characteristics of Flexural Ultrasonic Transducers. In: 2017 International Congress on Ultrasonics, Honolulu, HI, USA, 18-20 Dec 2017, 045002. (doi:10.1121/2.0000684)
Kang, L., Feeney, A. and Dixon, S. (2017) Flow Measurement Based on Two-Dimensional Flexural Ultrasonic Phased Arrays. In: 2017 International Congress on Ultrasonics, Honolulu, HI, USA, 18-20 Dec 2017, 045012. (doi:10.1121/2.0000708)
Feeney, A. and Kupnik, M. (2017) Flexural Ultrasonic Phased Array for Compensation of Beam Drift Effect of Flow Measurement. 3rd Flow Measurement Institute Conference, Coventry, UK, 11 Jul 2017.
Feeney, A. , Kang, L., Rowlands, G. and Dixon, S. (2017) Electro-mechanical Analysis of Flexural Transducers. 3rd Flow Measurement Institute Conference, Coventry, UK, 11 Jul 2017.
Dixon, S., Kang, L., Ginestier, M., Wells, C., Rowlands, G. and Feeney, A. (2017) The electro-mechanical behaviour of flexural ultrasonic transducers. Applied Physics Letters, 110(22), 223502. (doi: 10.1063/1.4984239)
Feeney, A. (2017) Five amazing ultrasound inventions set to change the world (and not a pregnancy scan in sight). Conversation, 12 May.
Feeney, A. , Sikaneta, S., Harkness, P. and Lucas, M. (2017) Ultrasonic compaction of granular geological materials. Ultrasonics, 76, pp. 136-144. (doi: 10.1016/j.ultras.2017.01.004) (PMID:28088705)
Kang, L., Feeney, A. , Su, R., Lines, D., Jäger, A., Wang, H., Arnaudov, Y., Ramadas, S. N., Kupnik, M. and Dixon, S. (2017) Two-Dimensional Flexural Ultrasonic Phased Array for Flow Measurement. In: 2017 IEEE International Ultrasonics Symposium (IUS), Washington, D.C., USA, 6-9 Sept 2017, ISBN 9781538633830 (doi:10.1109/ULTSYM.2017.8092220)
Jalalvand, M., Fotouhi, M. and Wisnom, M. R. (2017) Orientation-dispersed pseudo-ductile hybrid composite laminates – a new lay-up concept to avoid free-edge delamination. Composites Science and Technology, 153, pp. 232-240. (doi: 10.1016/j.compscitech.2017.10.011)
Fotouhi, M. , Jalalvand, M. and Wisnom, M. R. (2017) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour in all fibre orientations. Composites Science and Technology, 152, pp. 101-110. (doi: 10.1016/j.compscitech.2017.08.024)
Zarif Karimi, N., Heidary, H., Fotouhi, M. and Minak, G. (2017) Experimental analysis of GFRP laminates subjected to compression after drilling. Composite Structures, 169, pp. 144-152. (doi: 10.1016/j.compstruct.2017.01.017)
Fotouhi, M. , Sadeghi, S., Jalalvand, M. and Ahmadi, M. (2017) Analysis of the damage mechanisms in mixed-mode delamination of laminated composites using acoustic emission data clustering. Journal of Thermoplastic Composite Materials, 30(3), pp. 318-340. (doi: 10.1177/0892705715598362)
Fotouhi, M. , Sadeghi, S., Jalalvand, M. and Ahmadi, M. (2017) Analysis of the damage mechanisms in mixed-mode delamination of laminated composites using acoustic emission data clustering. Journal of Thermoplastic Composite Materials, 30(3), pp. 318-340. (doi: 10.1177/0892705715598362)
Fotouhi, M. , Saghafi, H., Brugo, T., Minak, G., Fragassa, C., Zucchelli, A. and Ahmadi, M. (2017) Effect of PVDF nanofibers on the fracture behavior of composite laminates for high-speed woodworking machines. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 231(1), pp. 31-43. (doi: 10.1177/0954406216650711)
Fotouhi, M. , Jalalvand, I. and Wisnom, M. (2017) Demonstration of Pseudo-ductility in High Performance Quasi-isotropic Thin Ply Carbon/glass Hybrid Composites. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Fotouhi, M. , Jalalvand, M., Longana, M., Fuller, J. and Wisnom, M.R. (2017) The High Strain Rate Tension Behaviour of Pseudo-ductile High Performance Thin Ply Carbon/Glass Hybrid Composites. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
Fotouhi, M. , Saeedifar, M., Yousefi, J. and Fotouhi, S. (2017) Application of acoustic emission technique in delamination of laminated composites. In: Barile, C. and Pappalettera, G. (eds.) Focus on Acoustic Emission Research. Nova Science Publishers. ISBN 9781536118483
Fotouhi, M. , Xiao, B., Pozegic, T., Jalalvand, M., Hamerton, I. and Wisnom, M. (2017) High Performance Piezo Electric Nanocomposite Sensor Nodes for Structural Health Monitoring. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Jalalvand, I., Fotouhi, M. , Leong, M. C. and Wisnom, M. (2017) A Novel Technique to Accurately Measure the Fibre Failure Strain in Composite Laminates Under a Combined In-plane Tension and Shear Stress State. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Leong, M.C., Fotouhi, M. , Jalalvand, M., Sun, X.C. and Wisnom, M.R. (2017) A Comparison of Damage Mechanisms in Scaled Static Indentation Tests on Glass and Carbon Fibre Laminates. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
Suwart, P., Fotouhi, M. , Czel, G. and Wisnom, M. (2017) Fatigue Behaviour of Pseudo-ductile Thin Ply Hybrid Composites. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Zarif, N., Fotouhi, M. and Minak, G. (2017) A Thrust and Feed Prediction Model for Drilling of Composite Materials. In: 3rd International Conference on Mechanics of Composites (MECHCOMP3), Bologna, Italy, 4-7 July 2017, ISBN 9788893850292(doi:10.15651/978-88-9385-029-2)
Zarif, N., Fotouhi, M. , Heidary, H. and Minak, G. (2017) Effect of Hole Machining Damages on Bending Strength of Composite Laminates. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
Fahy, C., Wheeler, S. J. , Gallipoli, D. and Grassl, P. (2017) Corrosion induced cracking modelled by a coupled transport-structural approach. Cement and Concrete Research, 94, pp. 24-35. (doi: 10.1016/j.cemconres.2017.01.007)
Pan, C., Shi, Y., Hui, F., Grustan Gutierrez, E. and Lanza, M. (2017) History and status of the CAFM. In: Lanza, M. (ed.) Conductive Atomic Force Microscopy: Applications in Nanomaterials. Wiley - V C H Verlag GmbH & Co. KGaA, pp. 1-28. ISBN 9783527340910 (doi:10.1002/9783527699773.ch1)
Hui, F., Grustan Gutierrez, E. , Long, S., Lui, Q., Ott, A. K., Ferrari, A. C. and Lanzo, M. (2017) 2D resistive switching memories: graphene and related materials for Resistive Random Access Memories. Advanced Electronic Materials, 3(8), (doi: 10.1002/aelm.201770032)
Hui, F., Grustan Gutierrez, E. , Long, S., Liu, Q., Ott, A. K., Ferrari, A. C. and Lanza, M. (2017) Graphene and related materials for resistive random access memories. Advanced Electronic Materials, 3(8), 1600195. (doi: 10.1002/aelm.201600195)
Grustan Gutierrez, E. and Gamero-Castaño, M. (2017) Microfabricated electrospray thruster array with high hydraulic resistance channels. Journal of Propulsion and Power, 33(4), pp. 984-992. (doi: 10.2514/1.b36268)
Hui, F., Vajha, P., Ji, Y., Pan, C., Grustan Gutierrez, E. , Duan, H., He, P., Ding, G., Shi, Y. and Lanza, M. (2017) Variability of graphene devices fabricated using graphene inks: Atomic force microscope tips. Surface and Coatings Technology, 320, pp. 391-395. (doi: 10.1016/j.surfcoat.2016.12.020)
Jiang, L. et al. (2017) High-resolution characterization of hexagonal boron nitride coatings exposed to aqueous and air oxidative environments. Nano Research, 10(6), pp. 2046-2055. (doi: 10.1007/s12274-016-1393-2)
Song, X. et al. (2017) Enhanced piezoelectric effect at the edges of stepped molybdenum disulfide nanosheets. Nanoscale, 9(19), pp. 6189-6608. (doi: 10.1039/c6nr09275f) (PMID:28338700)
Grustan Gutierrez, E. , Wei, C., Wang, B. and Lanza, M. (2017) Sputtering and amorphization of crystalline semiconductors by Nanodroplet Bombardment. Crystal Research and Technology, 52(1), 1600240. (doi: 10.1002/crat.201600240)
Alsayednoor, J., Lennard, F. , Yu, W.R. and Harrison, P. (2017) Influence of specimen pre-shear and wrinkling on the accuracy of uniaxial bias extension test results. Composites Part A: Applied Science and Manufacturing, 101, pp. 81-97. (doi:10.1016/j.compositesa.2017.06.006)
Big-Alabo, A., Cartmell, M. P. and Harrison, P. (2017) On the solution of asymptotic impact problems with significant localised indentation.Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 231(5), pp. 807-822.(doi:10.1177/0954406216628556)
Harrison, P., Alvarez, M. F. and Anderson, D. (2017) Towards comprehensive characterisation and modelling of the forming and wrinkling mechanics of engineering fabrics. International Journal of Solids and Structures, (doi:10.1016/j.ijsolstr.2016.11.008) (Early Online Publication)
Kumar, S., Pal, G. and Shah, T. (2017) High performance overhead power lines with carbon nanostructures for transmission and distribution of electricity from renewable sources. Journal of Cleaner Production, 145, pp. 180-187. (doi: 10.1016/j.jclepro.2017.01.053)
Kumar, S., Wardle, B. L. and Arif, M. F. (2017) Strength and performance enhancement of bonded joints by spatial tailoring of adhesive compliance via 3D printing. ACS Applied Materials and Interfaces, 9(1), pp. 884-891. (doi: 10.1021/acsami.6b13038)
Wang, Z. and Li, P. (2017) Voronoi cell finite element modelling of the intergranular fracture mechanism in polycrystalline alumina. Ceramics International, 43(9), pp. 6967-6975. (doi:10.1016/j.ceramint.2017.02.121)
Ho, N. S. K., Li, P., Raghavan, S. and Li, T. (2017) The effect of slurry composition on the microstructure and mechanical properties of open-cell Inconel foams manufactured by the slurry coating technique. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 687, pp. 123-130. (doi:10.1016/j.msea.2017.01.038)
Yao, X., Zhou, J., Lin, Y., Li, Y., Yu, H. and Liu, Y. (2017) Smart manufacturing based on cyber-physical systems and beyond. Journal of Intelligent Manufacturing, (doi:10.1007/s10845-017-1384-5) (Early Online Publication)
Hu, L., Liu, Y. , Lohse, N., Tang, R., Lv, J., Peng, C. and Evans, S. (2017) Sequencing the features to minimise the non-cutting energy consumption in machining considering the change of spindle rotation speed. Energy, 139, pp. 935-946.(doi:10.1016/j.energy.2017.08.032)
Jia, S., Yuan, Q., Lv, J., Liu, Y. , Ren, D. and Zhang, Z. (2017) Therblig-embedded value stream mapping method for lean energy machining. Energy, 138, pp. 1081-1098. (doi:10.1016/j.energy.2017.07.120)
Zhang, Y., Qian, C., Lv, J. and Liu, Y. (2017) Agent and cyber-physical system based self-organizing and self-adaptive intelligent shopfloor. IEEE Transactions on Industrial Informatics, 13(2), pp. 737-747. (doi:10.1109/TII.2016.2618892)
Hu, L., Peng, C., Evans, S., Peng, T., Liu, Y. , Tang, R. and Tiwari, A. (2017) Minimising the machining energy consumption of a machine tool by sequencing the features of a part. Energy, 121, pp. 292-305. (doi:10.1016/j.energy.2017.01.039)
Lv, J., Tang, R., Tang, W., Liu, Y. , Zhang, Y. and Jia, S. (2017) An investigation into reducing the spindle acceleration energy consumption of machine tools.Journal of Cleaner Production, 143, pp. 794-803. (doi:10.1016/j.jclepro.2016.12.045)
Liu, Y. , Farnsworth, M. and Tiwari, A. (2017) A review of optimisation techniques used in the composite recycling area: state-of-the-art and steps towards a research agenda. Journal of Cleaner Production, 140, pp. 1775-1781.(doi:10.1016/j.jclepro.2016.08.038)
Wilmers, J., McBride, A. and Bargmann, S. (2017) Interface elasticity effects in polymer-filled nanoporous metals. Journal of the Mechanics and Physics of Solids, 99, 163 - 177.(doi:10.1016/j.jmps.2016.11.011)
Carstensen, C., Ebobisse, F., McBride, A.T. , Reddy, B.D. and Steinmann, P. (2017) Some properties of the dissipative model of strain-gradient plasticity. Philosophical Magazine, 97(10), pp. 693-717. (doi:10.1080/14786435.2016.1274836)
Carstensen, C., Ebobisse, F., McBride, A. T. , Reddy, B. D. and Steinmann, P. (2017) Flow relations and yield functions for dissipative strain-gradient plasticity. In: dell'Isola, F., Sofonea, M. and Steigmann, D. (eds.) Mathematical Modelling in Solid Mechanics. Series: Advanced structured materials (69). Springer Singapore, pp. 31-42. ISBN 9789811037634 (doi:10.1007/978-981-10-3764-1_3)
Kartal, M.E., Dugdale, L.H., Harrigan, J.J., Siddiq, M.A., Pokrajac, D. and Mulvihill, D.M. (2017) Three-dimensional in situ observations of compressive damage mechanisms in syntactic foam using X-ray microcomputed tomography. Journal of Materials Science, 52(17), pp. 10186-10197. (doi: 10.1007/s10853-017-1177-4)
Mulvihill, D. M. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Experimental Observations on the Friction of Textile Fibres Relevant to Carbon Fibre Composite Forming. 12th BSSM Conference, Sheffield, UK, 29-31 Aug 2017.
Mulvihill, D. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Friction of Fibrous Tows. 6th European Conference on Tribology (ECOTRIB), Ljubljana, Slovenia, 7-9 June 2017.
Mulvihill, D. M. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Friction of carbon fibre tows. Composites Part A: Applied Science and Manufacturing, 93, pp. 185-198. (doi: 10.1016/j.compositesa.2016.08.034)
Mulvihill, D. M. and Sutcliffe, M. P.F. (2017) Effect of tool surface topography on friction with carbon fibre tows for composite fabric forming. Composites Part A: Applied Science and Manufacturing, 93, pp. 199-206. (doi: 10.1016/j.compositesa.2016.10.017)
Sonat, C., Lim, C.H., Liska, M. and Unluer, C. (2017) Recycling and reuse of reactive MgO cements – A feasibility study. Construction and Building Materials, 157, pp. 172-181. (doi: 10.1016/j.conbuildmat.2017.09.068)
Ruan, S., Liu, J., Yang, E.-H. and Unluer, C. (2017) Performance and microstructure of calcined dolomite and reactive magnesia-based concrete samples. Journal of Materials in Civil Engineering, 29(12), 04017236. (doi: 10.1061/(ASCE)MT.1943-5533.0002103)
Sonat, C., Dung, N.T. and Unluer, C. (2017) Performance and microstructural development of MgO–SiO2 binders under different curing conditions. Construction and Building Materials, 154, pp. 945-955. (doi: 10.1016/j.conbuildmat.2017.08.020)
Unluer, C. and Sonat, C. (2017) Influence of Mix Design on the Performance of MgO-SiO2 Concrete Samples. 2nd ACF Symposium, Innovations for Sustainable Concrete Infrastructures, Chiang Mai, Thailand, 23-25 November 2017.
Dung, N.T. and Unluer, C. (2017) Influence of nucleation seeding on the performance of carbonated MgO formulations. Cement and Concrete Composites, 83, pp. 1-9. (doi: 10.1016/j.cemconcomp.2017.07.005)
Sonat, C. and Unluer, C. (2017) Investigation of the performance and thermal decomposition of MgO and MgO-SiO2 formulations. Thermochimica Acta, 655, pp. 251-261. (doi: 10.1016/j.tca.2017.07.009)
Dung, N.T. and Unluer, C. (2017) Carbonated MgO concrete with improved performance: The influence of temperature and hydration agent on hydration, carbonation and strength gain. Cement and Concrete Composites, 82, pp. 152-164. (doi: 10.1016/j.cemconcomp.2017.06.006)
Ruan, S. and Unluer, C. (2017) Investigation of Strength Gain and Environmental Impacts of Reactive MgO Cement-Based Concrete Mixes. 37th Cement and Concrete Science Conference, London, UK, 11-12 September 2017.
Sonat, C. and Unluer, C. (2017) Investigation of the Mechanical Properties of MgO-SiO2 Binders. 37th Cement and Concrete Science Conference, London, UK, 11-12 September 2017.
Unluer, C. (2017) Influence of Calcination Conditions on the Properties of MgO. International Conference on Advances in Construction Materials and Systems, Chennai, India, 3-8 September 2017.
Unluer, C. (2017) Properties of Reactive Magnesia Cement under Different Calcination Conditions. 37th Cement and Concrete Science Conference, London, UK, 11-12 September 2017.
Ruan, S. and Unluer, C. (2017) Influence of supplementary cementitious materials on the performance and environmental impacts of reactive magnesia cement concrete. Journal of Cleaner Production, 159, pp. 62-73. (doi: 10.1016/j.jclepro.2017.05.044)
Dung, N.T. and Unluer, C. (2017) Sequestration of CO 2 in reactive MgO cement-based mixes with enhanced hydration mechanisms. Construction and Building Materials, 143, pp. 71-82. (doi: 10.1016/j.conbuildmat.2017.03.038)
Ruan, S. and Unluer, C. (2017) Effect of air entrainment on the performance of reactive MgO and PC mixes. Construction and Building Materials, 142, pp. 221-232. (doi: 10.1016/j.conbuildmat.2017.03.068)
Ruan, S. and Unluer, C. (2017) Influence of mix design on the carbonation, mechanical properties and microstructure of reactive MgO cement-based concrete. Cement and Concrete Composites, 80, pp. 104-114. (doi: 10.1016/j.cemconcomp.2017.03.004)
Fasihnikoutalab, M. H., Asadi, A., Unluer, C. , Huat, B. K., Ball, R. J. and Pourakbar, S. (2017) Utilization of alkali-activated olivine in soil stabilization and the effect of carbonation on unconfined compressive strength and microstructure. Journal of Materials in Civil Engineering, 29(6), 06017002. (doi: 10.1061/(ASCE)MT.1943-5533.0001833)
Dong, H., Unluer, C. , Yang, E.-H. and Al-Tabbaa, A. (2017) Synthesis of reactive MgO from reject brine via the addition of NH4OH. Hydrometallurgy, 169, pp. 165-172. (doi: 10.1016/j.hydromet.2017.01.010)
Unluer, C. (2017) Investigating the Carbonation and Mechanical Performance of Reactive MgO Cement Based Mixes. 11th High Performance Concrete (HPC) and 2nd Concrete Innovation Conference (CIC), Tromso, Norway, 6-8 March 2017.
Unluer, C. (2017) Carbonation and Mechanical Performance of Reactive Magnesia Based Formulations. 19th International Conference on Sustainable Building Materials and Construction Technologies (ICSBMCT 2017), Barcelona, Spain, February 2017.
Rheinheimer, V., Unluer, C. , Liu, J., Ruan, S., Pan, J. and Monteiro, P. (2017) XPS study on the stability and transformation of hydrate and carbonate phases within MgO systems. Materials, 10(1), 75. (doi: 10.3390/ma10010075)
Wielewski, E. , Boyce, D. E., Park, J.-S., Miller, M. P. and Dawson, P. R. (2017) A methodology to determine the elastic moduli of crystals by matching experimental and simulated lattice strain pole figures using discrete harmonics. Acta Materialia, 126, pp. 469-480. (doi:10.1016/j.actamat.2016.12.026)
2016
Barbera, D., Chen, H. and Liu, Y. (2016) On creep fatigue interaction of components at elevated temperature. Journal of Pressure Vessel Technology, 138(4), 041403. (doi:10.1115/1.4032278)
Barbera, D., Chen, H. and Liu, Y. (2016) Creep-fatigue behaviour of aluminum alloy-based metal matrix composite. International Journal of Pressure Vessels and Piping, 139-40, pp. 159-172.(doi:10.1016/j.ijpvp.2016.02.004)
Barbera, D., Chen, H. F. and Liu, Y. H. (2016) Creep fatigue life assessment of a pipe intersection with dissimilar material joint by linear matching method. Applied Mechanics and Materials, 853, pp. 366-371.(doi:10.4028/www.scientific.net/AMM.853.366)
Do, D. K. and Li, P. (2016) The effect of laser energy input on the microstructure, physical and mechanical properties of Ti-6Al-4V alloys by selective laser melting. Virtual and Physical Prototyping, 11(1), pp. 41-47. (doi:10.1080/17452759.2016.1142215)
Bejarano, F., Feeney, A. and Lucas, M. (2016) Optimisation of a cymbal transducer for its use in a high-power ultrasonic cutting device for bone surgery. Physics Procedia, 87, pp. 35-41. (doi: 10.1016/j.phpro.2016.12.007)
Feeney, A. , Bejarano, F. and Lucas, M. (2016) Dynamics characterisation of cymbal transducers for power ultrasonics applications. Physics Procedia, 87, pp. 29-34. (doi: 10.1016/j.phpro.2016.12.006)
Feeney, A. , Sikaneta, S., Harkness, P. and Lucas, M. (2016) An ultrasonic compactor fol oil and gas exploration. Physics Procedia, 87, pp. 72-78. (doi: 10.1016/j.phpro.2016.12.012)
Bejarano, F., Feeney, A. , Wallace, R., Simpson, H. and Lucas, M. (2016) An ultrasonic orthopaedic surgical device based on a cymbal transducer. Ultrasonics, 72, pp. 24-33. (doi: 10.1016/j.ultras.2016.07.004)
Feeney, A. , Sikaneta, S. G. and Lucas, M. (2016) Power Ultrasonics for Sub-sea Exploration. 2016 IEEE International Ultrasonics Symposium (IUS), Tours, France, 18-21 Sep 2016.
Saeedifar, M., Fotouhi, M. and Ahmadi Najafabadi, M. (2016) Investigation of push-out delamination using cohesive zone modelling and acoustic emission technique. Journal of Composite Materials, 50(25), pp. 3577-3588. (doi: 10.1177/0021998315622983)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czel, G. and Wisnom, M. R. (2016) Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission. Composites Part A: Applied Science and Manufacturing, 86, pp. 66-76. (doi: 10.1016/j.compositesa.2016.04.003)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Acoustic Emission Monitoring of Thin Ply Hybrid Composites Under Repeated Quasi-static Tensile Loading. In: 15th Youth Symposium on Experimental Solid Mechanics (YSESM 15), Rimini, Italy, 8-11 June 2016,
Nazmdar Shahri, M., Yousefi, J., Fotouhi, M. and Ahmadi Najfabadi, M. (2016) Damage evaluation of composite materials using acoustic emission features and Hilbert transform. Journal of Composite Materials, 50(14), pp. 1897-1907. (doi: 10.1177/0021998315597555)
Saeedifar, M., Fotouhi, M. , Ahmadi Najafabadi, M., Hosseini Toudeshky, H. and Minak, G. (2016) Prediction of quasi-static delamination onset and growth in laminated composites by acoustic emission. Composites Part B: Engineering, 85, pp. 113-122.(doi: 10.1016/j.compositesb.2015.09.037)
Czél, G., Rév, T., Jalalvand, M., Fotouhi, M. and Wisnom, M.R. (2016) Demonstration of Pseudo-ductility in Quasi-isotropic Laminates Comprising Thin-ply UD Carbon/epoxy Hybrid Sub-laminates. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Fotouhi, M. , Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Avoiding Free Edge Delamination in Quasi-Isotropic Pseudo-ductile Hybrid Laminates – By Material Dispersion or Layer Angle Dispersion? In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Acoustic Emission Based Method to Characterise the Damage Modes in UD Thin Carbon/glass Hybrid Laminates. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Minak, G., Fotouhi, M. and Ahmadi, M. (2016) Low-velocity impact of laminates. In: Silberschmidt, V. V. (ed.) Dynamic Deformation, Damage and Fracture in Composite Materials and Structures. Elsevier (Woodhead Publishing). ISBN 9780081000809
Palazzetti, R., Brugo, T., Minak, G., Zucchelli, A., Yan, X., Saghafi, H. and Fotouhi, M. (2016) A Study on Fatigue Behavior of Nanointerleaved Woven CFRP. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Saeedifar, M., Fotouhi, M. , Zarif, N., Ahmadi, M., Hosseini Toudeshky, H. and Minak, G. (2016) Prediction of Delamination Growth in Glass/epoxy Composites Using Acoustic Emission. In: 2nd International Conference on Mechanics of Composites (MECHCOMP2), Porto, Portugal, 11-14 July 2016, ISBN 9788874889631 (doi:10.15651/978-88-748-8963-1)
Athanasiadis, I., Wheeler, S. and Grassl, P. (2016) Network modelling of the influence of swelling on the transport behaviour of bentonite. Geosciences, 6(4), 55. (doi: 10.3390/geosciences6040055)
Xenos, D. and Grassl, P. (2016) Modelling the failure of reinforced concrete with nonlocal and crack band approaches using the damage-plasticity model CDPM2. Finite Elements in Analysis and Design, 117-8, pp. 11-20. (doi: 10.1016/j.finel.2016.04.002)
Athanasiadis, I., Wheeler, S. J. and Grassl, P. (2016) Network Modelling of Fluid Retention Behaviour in Unsaturated Soils. In: 3rd European Conference on Unsaturated Soils (E-UNSAT 2016), Paris, France, 12-14 Sept 2016, p. 11016. (doi:10.1051/e3sconf/20160911016)
Grassl, P. and Bolander, J. (2016) Three-dimensional network model for coupling of fracture and mass transport in quasi-brittle geomaterials. Materials, 9(9), 782. (doi: 10.3390/ma9090782) (PMID:28773902) (PMCID:PMC5457050)
Havlasek, P., Grassl, P. and Jirásek, M. (2016) Analysis of size effect on strength of quasi-brittle materials using integral-type nonlocal models. Engineering Fracture Mechanics, 157, pp. 72-85. (doi: 10.1016/j.engfracmech.2016.02.029)
Jing, X., Panholzer, E., Song, X., Grustan Gutierrez, E. , Huia, F., Shi, Y., Benstetter, G., Illarionov, Y., Grasser, T. and Lanza, M. (2016) Fabrication of scalable and ultra low power photodetectors with high light/dark current ratios using polycrystalline monolayer MoS2 sheets. Nano Energy, 30, pp. 494-502. (doi: 10.1016/j.nanoen.2016.10.032)
Ji, Y., Pan, C., Hui, F., Shi, Y., Jiang, L., Xiao, N., Grustan Gutierrez, E. , Larcher, L. and Lanza, M. (2016) Nanoscale Homogeneity and Degradation Process of Two Dimensional Atomically Thin Hexagonal Boron Nitride Dielectric Stacks. In: 23rd IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA 2016), Singapore, 18-21 July 2016, pp. 387-391. ISBN 9781467382601 (doi:10.1109/IPFA.2016.7564323)
Hui, F., Pan, C., Shi, Y., Ji, Y., Grustan Gutierrez, E. and Lanza, M. (2016) On the use of two dimensional hexagonal boron nitride as dielectric. Microelectronic Engineering, 163, pp. 119-133. (doi: 10.1016/j.mee.2016.06.015)
Pan, C., Hu, J., Grustan Gutierrez, E. , Hoang, M. T., Duan, H., Yvonnet, J., Mitrushchenkov, A., Chambaud, G. and Lanza, M. (2016) Suppression of nanowire clustering in hybrid energy harvesters. Journal of Materials Chemistry C, 2016(4), pp. 3646-3653.(doi: 10.1039/c6tc00468g)
Na, W., Ahn, H., Han, S., Harrison, P., Park, J. K., Jeong, E. and Yu, W.-R. (2016) Shear behavior of a shear thickening fluid-impregnated aramid fabrics at high shear rate. Composites Part B: Engineering, 97, pp. 162-175. (doi:10.1016/j.compositesb.2016.05.017)
Alsayednoor, J. and Harrison, P. (2016) Evaluating the performance of microstructure generation algorithms for 2-D foam-like representative volume elements. Mechanics of Materials, 98, pp. 44-58. (doi:10.1016/j.mechmat.2016.04.001)
Schubert, G. and Harrison, P. (2016) Magnetic induction measurements and identification of the permeability of magneto-rheological elastomers using finite element simulations. Journal of Magnetism and Magnetic Materials, 404, pp. 205-214. (doi:10.1016/j.jmmm.2015.12.003)
Harrison, P. (2016) Modelling the forming mechanics of engineering fabrics using a mutually constrained pantographic beam and membrane mesh. Composites Part A: Applied Science and Manufacturing, 81, pp. 145-157. (doi:10.1016/j.compositesa.2015.11.005)
Park, H., Harrison, P., Guo, Z., Lee, M.-G. and Yu, W.-R. (2016) Three-dimensional constitutive model for shape memory polymers using multiplicative decomposition of the deformation gradient and shape memory strains. Mechanics of Materials, 93, pp. 43-62.(doi:10.1016/j.mechmat.2015.10.014)
Harrison, P. and Härtel, F. (2016) Correction to ‘Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics’.Composites Part A: Applied Science and Manufacturing, 80, pp. 104-106. (doi:10.1016/j.compositesa.2015.10.013)
Schubert, G. and Harrison, P. (2016) Equi-biaxial tension tests on magneto-rheological elastomers. Smart Materials and Structures, 25(1), 015015.(doi:10.1088/0964-1726/25/1/015015)
Harrison, P., Anderson, D., Alvarez, M. F., Bali, E. and Mateos, Y. (2016) Measuring and Modelling the In-Plane Bending Stiffness and Wrinkling Behaviour of Engineering Fabrics. In: EUROMECH Colloquium 569: Multiscale Modeling of Fibrous and Textile Materials, Chatenay-Malabry, France, 5-7 April 2016,
López Jiménez, F., Upadhyaya, P., Liljenhjerte, J., Reis, P.M. and Kumar, S. (2016) Soft optical composites for tunable transmittance. Extreme Mechanics Letters, 9(2), pp. 297-303. (doi: 10.1016/j.eml.2016.09.003)
López Jiménez, F., Kumar, S. and Reis, P. M. (2016) Soft color composites with tunable optical transmittance. Advanced Optical Materials, (doi: 10.1002/adom.201500617)
Cui, Y., Kundalwal, S.I. and Kumar, S. (2016) Gas barrier performance of graphene/polymer nanocomposites. Carbon, 98, pp. 313-333. (doi: 10.1016/j.carbon.2015.11.018)
Pal, G. and Kumar, S. (2016) Multiscale modeling of effective electrical conductivity of short carbon fiber-carbon nanotube-polymer matrix hybrid composites. Materials and Design, 89, pp. 129-136. (doi: 10.1016/j.matdes.2015.09.105)
Pal, G. and Kumar, S. (2016) Modeling of carbon nanotubes and carbon nanotube–polymer composites. Progress in Aerospace Sciences, (doi: 10.1016/j.paerosci.2015.12.001)
Liu, Z., Li, P., Srikanth, N., Liu, T. and Chai, G. B. (2016) Quantification of flexural fatigue life and 3D damage in carbon fibre reinforced polymer laminates. Composites Part A: Applied Science and Manufacturing, 90, pp. 778-785.(doi:10.1016/j.compositesa.2016.09.008)
Huang, R., Li, P., Wang, Z. and Liu, T. (2016) X-ray microtomographic characterization and quantification of the strain rate dependent failure mechanism in cenosphere epoxy syntactic foams. Advanced Engineering Materials, 18(9), pp. 1550-1555.(doi:10.1002/adem.201600215)
Li, P. and Wang, Z. (2016) Experimental characterization and modified constitutive modeling of the strain rate dependent compressive behavior of adhesives. Macromolecular Materials and Engineering, 301(5), pp. 577-585. (doi:10.1002/mame.201500415)
Huang, R., Li, P. and Liu, T. (2016) X-ray microtomography and finite element modelling of compressive failure mechanism in cenosphere epoxy syntactic foams. Composite Structures, 140, pp. 157-165. (doi:10.1016/j.compstruct.2015.12.040)
Li, P., Nguyen, N. V. and Hao, H. (2016) Dynamic compressive behaviour of Mg foams manufactured by the direct foaming process. Materials and Design, 89, pp. 636-641. (doi:10.1016/j.matdes.2015.10.021)
Liu, Y. , Dong, H., Lohse, N. and Petrovic, S. (2016) A multi-objective genetic algorithm for optimisation of energy consumption and shop floor production performance. International Journal of Production Economics, 179, pp. 259-272.(doi:10.1016/j.ijpe.2016.06.019)
Lv, J., Tang, R., Jia, S. and Liu, Y. (2016) Experimental study on energy consumption of computer numerical control machine tools. Journal of Cleaner Production, 112, pp. 3864-3874. (doi:10.1016/j.jclepro.2015.07.040)
Pelteret, J.-P., Davydov, D., McBride, A. , Vu, D. K. and Steinmann, P. (2016) Computational electro- and magneto-elasticity for quasi-incompressible media immersed in free space. International Journal for Numerical Methods in Engineering, 108(11), pp. 1307-1342. (doi:10.1002/nme.5254)
McBride, A. , Bargmann, S., Pond, D. and Limbert, G. (2016) Thermoelastic modelling of the skin at finite deformations. Journal of Thermal Biology, 62(part B), pp. 201-209.(doi:10.1016/j.jtherbio.2016.06.017) (PMID:27888934)
Wakeni, M.F., Reddy, B.D. and McBride, A.T. (2016) A thermodynamically consistent formulation of generalized thermoelasticity at finite deformations. International Journal of Engineering Science, 108, pp. 1-8. (doi:10.1016/j.ijengsci.2016.08.008)
Wakeni, M. F., Reddy, D. and McBride, A. T. (2016) An unconditionally stable algorithm for generalized thermoelasticity based on operator-splitting and time-discontinuous Galerkin finite element methods. Computer Methods in Applied Mechanics and Engineering, 306, pp. 427-451. (doi:10.1016/j.cma.2016.03.040)
De Lorenzis, L., McBride, A. and Reddy, B.D. (2016) Phase-field modelling of fracture in single crystal plasticity. GAMM-Mitteilungen, 39(1), pp. 7-34. (doi:10.1002/gamm.201610002)
Bayerschen, E., McBride, A.T. , Reddy, B.D. and Böhlke, T. (2016) Review on slip transmission criteria in experiments and crystal plasticity models. Journal of Materials Science, 51(5), pp. 2243-2258. (doi:10.1007/s10853-015-9553-4)
Gottschalk, D., McBride, A. , Reddy, B.D., Javili, A., Wriggers, P. and Hirschberger, C.B. (2016) Computational and theoretical aspects of a grain-boundary model that accounts for grain misorientation and grain-boundary orientation. Computational Materials Science, 111, pp. 443-459. (doi:10.1016/j.commatsci.2015.09.048)
McBride, A.T. , Gottschalk, D., Reddy, B.D., Wriggers, P. and Javili, A. (2016) Computational and theoretical aspects of a grain-boundary model at finite deformations. Technische Mechanik, 36(1-2), pp. 92-109.
Mulvihill, D. M., O'Brien, N. P., Curtin, W. A. and McCarthy, M. A. (2016) Potential routes to stronger carbon nanotube fibres via carbon ion irradiation and deposition. Carbon, 96, pp. 1138-1156. (doi:10.1016/j.carbon.2015.10.055)
Gall, E. T., Sonat, C., Nazaroff, W. W. and Unluer, C. (2016) Investigating CO2 removal by Ca- and Mg-based sorbents with application to indoor air treatment. Building and Environment, 110, pp. 161-172. (doi: 10.1016/j.buildenv.2016.10.008)
Ruan, S. and Unluer, C. (2016) Comparative life cycle assessment of reactive MgO and Portland cement production. Journal of Cleaner Production, 137, pp. 258-273. (doi: 10.1016/j.jclepro.2016.07.071)
Dung, N.T. and Unluer, C. (2016) Improving the performance of reactive MgO cement-based concrete mixes. Construction and Building Materials, 126, pp. 747-758. (doi: 10.1016/j.conbuildmat.2016.09.090)
Pu, L. and Unluer, C. (2016) Investigation of carbonation depth and its influence on the performance and microstructure of MgO cement and PC mixes. Construction and Building Materials, 120, pp. 349-363. (doi: 10.1016/j.conbuildmat.2016.05.067)
Unluer, C. (2016) Development of Novel Sustainable Concrete Products. Singapore Sustainable Built Environment Conference, Singapore, 5-6 September 2016.
Qiu, J., Ruan, S., Ong, J., Ong, N.S.Q., Unluer, C. and Yang, E.-H. (2016) Fiber-Reinforced Strain-Hardening Composites Incorporating MgO Cement and Fly Ash. Sustainable Construction Materials & Technologies (SCMT4), Las Vegas, USA, 7-11 August 2016.
Unluer, C. (2016) Advances in the Carbonation and Recycling of Sustainable Cement-Based Materials. 2016 World Congress on Advances in Civil, Environmental, and Materials Research (ACEM16), Jeju, Korea, 28 Aug - 1 Sept 2016.
Unluer, C. (2016) Carbonation and Recycling Potential of Novel MgO Cements. 2nd International Conference on Concrete Sustainability (ICCS16), Madrid, Spain, 13-15 June 2016.
Unluer, C. and Al-Tabbaa, A. (2016) Reply to the discussion of the papers “ Impact of hydrated magnesium carbonate additives on the carbonation of reactive MgO cements ” and “ Enhancing the carbonation of MgO cement porous blocks through improved curing conditions ”, by S.A. Walling and J.L. Provis. Cement and Concrete Research, 79, pp. 427-430. (doi: 10.1016/j.cemconres.2015.09.009)
Dong, H., Unluer, C. , Al-Tabbaa, A. and Yang, E.H. (2016) Characterization of MgO Calcined from Mg(OH)2 Produced from Reject Brine. In: 4th International Conference on Sustainable Construction Materials and Technologies, Las Vegas, United States, 7-11 Aug 2016,
Barbera, D., Chen, H. and Liu, Y. (2016) Creep-fatigue behaviour of aluminum alloy-based metal matrix composite. International Journal of Pressure Vessels and Piping, 139-40, pp. 159-172.(doi:10.1016/j.ijpvp.2016.02.004)
Barbera, D., Chen, H. F. and Liu, Y. H. (2016) Creep fatigue life assessment of a pipe intersection with dissimilar material joint by linear matching method. Applied Mechanics and Materials, 853, pp. 366-371.(doi:10.4028/www.scientific.net/AMM.853.366)
Do, D. K. and Li, P. (2016) The effect of laser energy input on the microstructure, physical and mechanical properties of Ti-6Al-4V alloys by selective laser melting. Virtual and Physical Prototyping, 11(1), pp. 41-47. (doi:10.1080/17452759.2016.1142215)
Bejarano, F., Feeney, A. and Lucas, M. (2016) Optimisation of a cymbal transducer for its use in a high-power ultrasonic cutting device for bone surgery. Physics Procedia, 87, pp. 35-41. (doi: 10.1016/j.phpro.2016.12.007)
Feeney, A. , Bejarano, F. and Lucas, M. (2016) Dynamics characterisation of cymbal transducers for power ultrasonics applications. Physics Procedia, 87, pp. 29-34. (doi: 10.1016/j.phpro.2016.12.006)
Feeney, A. , Sikaneta, S., Harkness, P. and Lucas, M. (2016) An ultrasonic compactor fol oil and gas exploration. Physics Procedia, 87, pp. 72-78. (doi: 10.1016/j.phpro.2016.12.012)
Bejarano, F., Feeney, A. , Wallace, R., Simpson, H. and Lucas, M. (2016) An ultrasonic orthopaedic surgical device based on a cymbal transducer. Ultrasonics, 72, pp. 24-33. (doi: 10.1016/j.ultras.2016.07.004)
Feeney, A. , Sikaneta, S. G. and Lucas, M. (2016) Power Ultrasonics for Sub-sea Exploration. 2016 IEEE International Ultrasonics Symposium (IUS), Tours, France, 18-21 Sep 2016.
Saeedifar, M., Fotouhi, M. and Ahmadi Najafabadi, M. (2016) Investigation of push-out delamination using cohesive zone modelling and acoustic emission technique. Journal of Composite Materials, 50(25), pp. 3577-3588. (doi: 10.1177/0021998315622983)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czel, G. and Wisnom, M. R. (2016) Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission. Composites Part A: Applied Science and Manufacturing, 86, pp. 66-76. (doi: 10.1016/j.compositesa.2016.04.003)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Acoustic Emission Monitoring of Thin Ply Hybrid Composites Under Repeated Quasi-static Tensile Loading. In: 15th Youth Symposium on Experimental Solid Mechanics (YSESM 15), Rimini, Italy, 8-11 June 2016,
Nazmdar Shahri, M., Yousefi, J., Fotouhi, M. and Ahmadi Najfabadi, M. (2016) Damage evaluation of composite materials using acoustic emission features and Hilbert transform. Journal of Composite Materials, 50(14), pp. 1897-1907. (doi: 10.1177/0021998315597555)
Saeedifar, M., Fotouhi, M. , Ahmadi Najafabadi, M., Hosseini Toudeshky, H. and Minak, G. (2016) Prediction of quasi-static delamination onset and growth in laminated composites by acoustic emission. Composites Part B: Engineering, 85, pp. 113-122.(doi: 10.1016/j.compositesb.2015.09.037)
Czél, G., Rév, T., Jalalvand, M., Fotouhi, M. and Wisnom, M.R. (2016) Demonstration of Pseudo-ductility in Quasi-isotropic Laminates Comprising Thin-ply UD Carbon/epoxy Hybrid Sub-laminates. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Fotouhi, M. , Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Avoiding Free Edge Delamination in Quasi-Isotropic Pseudo-ductile Hybrid Laminates – By Material Dispersion or Layer Angle Dispersion? In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Acoustic Emission Based Method to Characterise the Damage Modes in UD Thin Carbon/glass Hybrid Laminates. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Minak, G., Fotouhi, M. and Ahmadi, M. (2016) Low-velocity impact of laminates. In: Silberschmidt, V. V. (ed.) Dynamic Deformation, Damage and Fracture in Composite Materials and Structures. Elsevier (Woodhead Publishing). ISBN 9780081000809
Palazzetti, R., Brugo, T., Minak, G., Zucchelli, A., Yan, X., Saghafi, H. and Fotouhi, M. (2016) A Study on Fatigue Behavior of Nanointerleaved Woven CFRP. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Saeedifar, M., Fotouhi, M. , Zarif, N., Ahmadi, M., Hosseini Toudeshky, H. and Minak, G. (2016) Prediction of Delamination Growth in Glass/epoxy Composites Using Acoustic Emission. In: 2nd International Conference on Mechanics of Composites (MECHCOMP2), Porto, Portugal, 11-14 July 2016, ISBN 9788874889631 (doi:10.15651/978-88-748-8963-1)
Athanasiadis, I., Wheeler, S. and Grassl, P. (2016) Network modelling of the influence of swelling on the transport behaviour of bentonite. Geosciences, 6(4), 55. (doi: 10.3390/geosciences6040055)
Xenos, D. and Grassl, P. (2016) Modelling the failure of reinforced concrete with nonlocal and crack band approaches using the damage-plasticity model CDPM2. Finite Elements in Analysis and Design, 117-8, pp. 11-20. (doi: 10.1016/j.finel.2016.04.002)
Athanasiadis, I., Wheeler, S. J. and Grassl, P. (2016) Network Modelling of Fluid Retention Behaviour in Unsaturated Soils. In: 3rd European Conference on Unsaturated Soils (E-UNSAT 2016), Paris, France, 12-14 Sept 2016, p. 11016. (doi:10.1051/e3sconf/20160911016)
Grassl, P. and Bolander, J. (2016) Three-dimensional network model for coupling of fracture and mass transport in quasi-brittle geomaterials. Materials, 9(9), 782. (doi: 10.3390/ma9090782) (PMID:28773902) (PMCID:PMC5457050)
Havlasek, P., Grassl, P. and Jirásek, M. (2016) Analysis of size effect on strength of quasi-brittle materials using integral-type nonlocal models. Engineering Fracture Mechanics, 157, pp. 72-85. (doi: 10.1016/j.engfracmech.2016.02.029)
Jing, X., Panholzer, E., Song, X., Grustan Gutierrez, E. , Huia, F., Shi, Y., Benstetter, G., Illarionov, Y., Grasser, T. and Lanza, M. (2016) Fabrication of scalable and ultra low power photodetectors with high light/dark current ratios using polycrystalline monolayer MoS2 sheets. Nano Energy, 30, pp. 494-502. (doi: 10.1016/j.nanoen.2016.10.032)
Ji, Y., Pan, C., Hui, F., Shi, Y., Jiang, L., Xiao, N., Grustan Gutierrez, E. , Larcher, L. and Lanza, M. (2016) Nanoscale Homogeneity and Degradation Process of Two Dimensional Atomically Thin Hexagonal Boron Nitride Dielectric Stacks. In: 23rd IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA 2016), Singapore, 18-21 July 2016, pp. 387-391. ISBN 9781467382601 (doi:10.1109/IPFA.2016.7564323)
Hui, F., Pan, C., Shi, Y., Ji, Y., Grustan Gutierrez, E. and Lanza, M. (2016) On the use of two dimensional hexagonal boron nitride as dielectric. Microelectronic Engineering, 163, pp. 119-133. (doi: 10.1016/j.mee.2016.06.015)
Pan, C., Hu, J., Grustan Gutierrez, E. , Hoang, M. T., Duan, H., Yvonnet, J., Mitrushchenkov, A., Chambaud, G. and Lanza, M. (2016) Suppression of nanowire clustering in hybrid energy harvesters. Journal of Materials Chemistry C, 2016(4), pp. 3646-3653.(doi: 10.1039/c6tc00468g)
Na, W., Ahn, H., Han, S., Harrison, P., Park, J. K., Jeong, E. and Yu, W.-R. (2016) Shear behavior of a shear thickening fluid-impregnated aramid fabrics at high shear rate. Composites Part B: Engineering, 97, pp. 162-175. (doi:10.1016/j.compositesb.2016.05.017)
Alsayednoor, J. and Harrison, P. (2016) Evaluating the performance of microstructure generation algorithms for 2-D foam-like representative volume elements. Mechanics of Materials, 98, pp. 44-58. (doi:10.1016/j.mechmat.2016.04.001)
Schubert, G. and Harrison, P. (2016) Magnetic induction measurements and identification of the permeability of magneto-rheological elastomers using finite element simulations. Journal of Magnetism and Magnetic Materials, 404, pp. 205-214. (doi:10.1016/j.jmmm.2015.12.003)
Harrison, P. (2016) Modelling the forming mechanics of engineering fabrics using a mutually constrained pantographic beam and membrane mesh. Composites Part A: Applied Science and Manufacturing, 81, pp. 145-157. (doi:10.1016/j.compositesa.2015.11.005)
Park, H., Harrison, P., Guo, Z., Lee, M.-G. and Yu, W.-R. (2016) Three-dimensional constitutive model for shape memory polymers using multiplicative decomposition of the deformation gradient and shape memory strains. Mechanics of Materials, 93, pp. 43-62.(doi:10.1016/j.mechmat.2015.10.014)
Harrison, P. and Härtel, F. (2016) Correction to ‘Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics’.Composites Part A: Applied Science and Manufacturing, 80, pp. 104-106. (doi:10.1016/j.compositesa.2015.10.013)
Schubert, G. and Harrison, P. (2016) Equi-biaxial tension tests on magneto-rheological elastomers. Smart Materials and Structures, 25(1), 015015.(doi:10.1088/0964-1726/25/1/015015)
Harrison, P., Anderson, D., Alvarez, M. F., Bali, E. and Mateos, Y. (2016) Measuring and Modelling the In-Plane Bending Stiffness and Wrinkling Behaviour of Engineering Fabrics. In: EUROMECH Colloquium 569: Multiscale Modeling of Fibrous and Textile Materials, Chatenay-Malabry, France, 5-7 April 2016,
López Jiménez, F., Upadhyaya, P., Liljenhjerte, J., Reis, P.M. and Kumar, S. (2016) Soft optical composites for tunable transmittance. Extreme Mechanics Letters, 9(2), pp. 297-303. (doi: 10.1016/j.eml.2016.09.003)
López Jiménez, F., Kumar, S. and Reis, P. M. (2016) Soft color composites with tunable optical transmittance. Advanced Optical Materials, (doi: 10.1002/adom.201500617)
Cui, Y., Kundalwal, S.I. and Kumar, S. (2016) Gas barrier performance of graphene/polymer nanocomposites. Carbon, 98, pp. 313-333. (doi: 10.1016/j.carbon.2015.11.018)
Pal, G. and Kumar, S. (2016) Multiscale modeling of effective electrical conductivity of short carbon fiber-carbon nanotube-polymer matrix hybrid composites. Materials and Design, 89, pp. 129-136. (doi: 10.1016/j.matdes.2015.09.105)
Pal, G. and Kumar, S. (2016) Modeling of carbon nanotubes and carbon nanotube–polymer composites. Progress in Aerospace Sciences, (doi: 10.1016/j.paerosci.2015.12.001)
Liu, Z., Li, P., Srikanth, N., Liu, T. and Chai, G. B. (2016) Quantification of flexural fatigue life and 3D damage in carbon fibre reinforced polymer laminates. Composites Part A: Applied Science and Manufacturing, 90, pp. 778-785.(doi:10.1016/j.compositesa.2016.09.008)
Huang, R., Li, P., Wang, Z. and Liu, T. (2016) X-ray microtomographic characterization and quantification of the strain rate dependent failure mechanism in cenosphere epoxy syntactic foams. Advanced Engineering Materials, 18(9), pp. 1550-1555.(doi:10.1002/adem.201600215)
Li, P. and Wang, Z. (2016) Experimental characterization and modified constitutive modeling of the strain rate dependent compressive behavior of adhesives. Macromolecular Materials and Engineering, 301(5), pp. 577-585. (doi:10.1002/mame.201500415)
Huang, R., Li, P. and Liu, T. (2016) X-ray microtomography and finite element modelling of compressive failure mechanism in cenosphere epoxy syntactic foams. Composite Structures, 140, pp. 157-165. (doi:10.1016/j.compstruct.2015.12.040)
Li, P., Nguyen, N. V. and Hao, H. (2016) Dynamic compressive behaviour of Mg foams manufactured by the direct foaming process. Materials and Design, 89, pp. 636-641. (doi:10.1016/j.matdes.2015.10.021)
Liu, Y. , Dong, H., Lohse, N. and Petrovic, S. (2016) A multi-objective genetic algorithm for optimisation of energy consumption and shop floor production performance. International Journal of Production Economics, 179, pp. 259-272.(doi:10.1016/j.ijpe.2016.06.019)
Lv, J., Tang, R., Jia, S. and Liu, Y. (2016) Experimental study on energy consumption of computer numerical control machine tools. Journal of Cleaner Production, 112, pp. 3864-3874. (doi:10.1016/j.jclepro.2015.07.040)
Pelteret, J.-P., Davydov, D., McBride, A. , Vu, D. K. and Steinmann, P. (2016) Computational electro- and magneto-elasticity for quasi-incompressible media immersed in free space. International Journal for Numerical Methods in Engineering, 108(11), pp. 1307-1342. (doi:10.1002/nme.5254)
McBride, A. , Bargmann, S., Pond, D. and Limbert, G. (2016) Thermoelastic modelling of the skin at finite deformations. Journal of Thermal Biology, 62(part B), pp. 201-209.(doi:10.1016/j.jtherbio.2016.06.017) (PMID:27888934)
Wakeni, M.F., Reddy, B.D. and McBride, A.T. (2016) A thermodynamically consistent formulation of generalized thermoelasticity at finite deformations. International Journal of Engineering Science, 108, pp. 1-8. (doi:10.1016/j.ijengsci.2016.08.008)
Wakeni, M. F., Reddy, D. and McBride, A. T. (2016) An unconditionally stable algorithm for generalized thermoelasticity based on operator-splitting and time-discontinuous Galerkin finite element methods. Computer Methods in Applied Mechanics and Engineering, 306, pp. 427-451. (doi:10.1016/j.cma.2016.03.040)
De Lorenzis, L., McBride, A. and Reddy, B.D. (2016) Phase-field modelling of fracture in single crystal plasticity. GAMM-Mitteilungen, 39(1), pp. 7-34. (doi:10.1002/gamm.201610002)
Bayerschen, E., McBride, A.T. , Reddy, B.D. and Böhlke, T. (2016) Review on slip transmission criteria in experiments and crystal plasticity models. Journal of Materials Science, 51(5), pp. 2243-2258. (doi:10.1007/s10853-015-9553-4)
Gottschalk, D., McBride, A. , Reddy, B.D., Javili, A., Wriggers, P. and Hirschberger, C.B. (2016) Computational and theoretical aspects of a grain-boundary model that accounts for grain misorientation and grain-boundary orientation. Computational Materials Science, 111, pp. 443-459. (doi:10.1016/j.commatsci.2015.09.048)
McBride, A.T. , Gottschalk, D., Reddy, B.D., Wriggers, P. and Javili, A. (2016) Computational and theoretical aspects of a grain-boundary model at finite deformations. Technische Mechanik, 36(1-2), pp. 92-109.
Mulvihill, D. M., O'Brien, N. P., Curtin, W. A. and McCarthy, M. A. (2016) Potential routes to stronger carbon nanotube fibres via carbon ion irradiation and deposition. Carbon, 96, pp. 1138-1156. (doi:10.1016/j.carbon.2015.10.055)
Gall, E. T., Sonat, C., Nazaroff, W. W. and Unluer, C. (2016) Investigating CO2 removal by Ca- and Mg-based sorbents with application to indoor air treatment. Building and Environment, 110, pp. 161-172. (doi: 10.1016/j.buildenv.2016.10.008)
Ruan, S. and Unluer, C. (2016) Comparative life cycle assessment of reactive MgO and Portland cement production. Journal of Cleaner Production, 137, pp. 258-273. (doi: 10.1016/j.jclepro.2016.07.071)
Dung, N.T. and Unluer, C. (2016) Improving the performance of reactive MgO cement-based concrete mixes. Construction and Building Materials, 126, pp. 747-758. (doi: 10.1016/j.conbuildmat.2016.09.090)
Pu, L. and Unluer, C. (2016) Investigation of carbonation depth and its influence on the performance and microstructure of MgO cement and PC mixes. Construction and Building Materials, 120, pp. 349-363. (doi: 10.1016/j.conbuildmat.2016.05.067)
Unluer, C. (2016) Development of Novel Sustainable Concrete Products. Singapore Sustainable Built Environment Conference, Singapore, 5-6 September 2016.
Qiu, J., Ruan, S., Ong, J., Ong, N.S.Q., Unluer, C. and Yang, E.-H. (2016) Fiber-Reinforced Strain-Hardening Composites Incorporating MgO Cement and Fly Ash. Sustainable Construction Materials & Technologies (SCMT4), Las Vegas, USA, 7-11 August 2016.
Unluer, C. (2016) Advances in the Carbonation and Recycling of Sustainable Cement-Based Materials. 2016 World Congress on Advances in Civil, Environmental, and Materials Research (ACEM16), Jeju, Korea, 28 Aug - 1 Sept 2016.
Unluer, C. (2016) Carbonation and Recycling Potential of Novel MgO Cements. 2nd International Conference on Concrete Sustainability (ICCS16), Madrid, Spain, 13-15 June 2016.
Unluer, C. and Al-Tabbaa, A. (2016) Reply to the discussion of the papers “ Impact of hydrated magnesium carbonate additives on the carbonation of reactive MgO cements ” and “ Enhancing the carbonation of MgO cement porous blocks through improved curing conditions ”, by S.A. Walling and J.L. Provis. Cement and Concrete Research, 79, pp. 427-430. (doi: 10.1016/j.cemconres.2015.09.009)
Dong, H., Unluer, C. , Al-Tabbaa, A. and Yang, E.H. (2016) Characterization of MgO Calcined from Mg(OH)2 Produced from Reject Brine. In: 4th International Conference on Sustainable Construction Materials and Technologies, Las Vegas, United States, 7-11 Aug 2016,
2015
Barbera, D. and Laurenzi, S. (2015) Nonlinear buckling and folding analysis of a storable tubular ultrathin boom for nanosatellites. Composite Structures, 132, pp. 226-238. (doi:10.1016/j.compstruct.2015.05.024)
Barbera, D. and Chen, H. (2015) Creep rupture assessment by a robust creep data interpolation using the Linear Matching Method. European Journal of Mechanics - A/Solids, 54, pp. 267-279.(doi:10.1016/j.euromechsol.2015.07.003)
Barbera, D., Chen, H. and Liu, Y. (2015) On the Creep Fatigue Behaviour of Metal Matrix Composites. In: 14th International Conference on Pressure Vessel Technology, Shanghai, China, 23-25 Sep 2015, pp. 1121-1136. (doi:10.1016/j.proeng.2015.12.277)
Mathieson, A., Feeney, A., Tweedie, A. and Lucas, M. (2015) Ultrasonic Biopsy Needle Based on the Class IV Flextensional Configuration. In: 2015 IEEE International Ultrasonics Symposium, Taipei, Taiwan, 21-24 Oct 2015, pp. 1-4. (doi:10.1109/ULTSYM.2015.0213)
Feeney, A. and Lucas, M. (2015) Differential scanning calorimetry of superelastic Nitinol for tunable cymbal transducers. Journal of Intelligent Material Systems and Structures, 27(10), pp. 1376-1387. (doi: 10.1177/1045389X15591383)
Feeney, A., Tweedie, A., Mathieson, A. and Lucas, M. (2015) A Miniaturized Class IV Flextensional Ultrasonic Transducer. In: 44th UIA Symposium, Washington DC, USA, 20-22 Apr 2015
Feeney, A. and Lucas, M. (2015) Differential Scanning Calorimetry of Superelastic Nitinol for Tuneable Devices. In: 10th International Conference on Advances in Experimental Mechanics, Edinburgh, Scotland, 1-3 Sep 2015
Zarif Karimi, N., Fotouhi, M. , Saeedifar, M., Minak, G. and Ahmadi Najafabadi, M. (2015) Inter-laminar Fracture Toughness Measurement of the Mixed-mode Delamination Using Acoustic Emission Technique. 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal, 15-18 Jun 2015.
Mohammadi, R., Saeedifar, M., Toudeshky, H. H., Najafabadi, M. A. and Fotouhi, M. (2015) Prediction of delamination growth in carbon/epoxy composites using a novel acoustic emission-based approach. Journal of Reinforced Plastics and Composites, 34(11), pp. 868-878. (doi: 10.1177/0731684415583166)
Saeedifar, M., Fotouhi, M. , Ahmadi Najafabadi, M. and Hosseini Toudeshky, H. (2015) Prediction of delamination growth in laminated composites using acoustic emission and Cohesive Zone Modeling techniques. Composite Structures, 124, pp. 120-127.(doi: 10.1016/j.compstruct.2015.01.003)
Fotouhi, M. , Saeedifar, M., Sadeghi, S., Ahmadi Najafabadi, M. and Minak, G. (2015) Investigation of the damage mechanisms for mode I delamination growth in foam core sandwich composites using acoustic emission. Structural Health Monitoring, 14(3), pp. 265-280. (doi: 10.1177/1475921714568403)
Brugo, T.M., Minak, G., Zucchelli, A., Saghafi, H. and Fotouhi, M. (2015) An investigation on the fatigue based delamination of woven carbon-epoxy composite laminates reinforced with polyamide nanofibers. Procedia Engineering, 109, pp. 65-72. (doi: 10.1016/j.proeng.2015.06.208)
Grégoire, D., Verdon, L., Lefort, V., Grassl, P. , Saliba, J., Regoin, J.-P., Loukili, A. and Pijaudier-Cabot, G. (2015) Mesoscale analysis of failure in quasi-brittle materials: comparison between lattice model and acoustic emission data. International Journal for Numerical and Analytical Methods in Geomechanics, 39(15), pp. 1639-1664. (doi: 10.1002/nag.2363)
Xenos, D., Grégoire, D., Morel, S. and Grassl, P. (2015) Calibration of nonlocal models for tensile fracture in quasi-brittle heterogeneous materials. Journal of the Mechanics and Physics of Solids, 82, pp. 48-60. (doi: 10.1016/j.jmps.2015.05.019)
Grassl, P. , Fahy, C., Gallipoli, D. and Wheeler, S.J. (2015) On a 2D hydro-mechanical lattice approach for modelling hydraulic fracture. Journal of the Mechanics and Physics of Solids, 93, pp. 64-73. (doi: 10.1016/j.jmps.2014.11.011)
Athanasiadis, I., Wheeler, S. and Grassl, P. (2015) Modelling the Time Dependence of Transport Properties of Porous Materials. In: CONCREEP 10: 10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, Vienna, Austria, 21-23 Sep 2015, pp. 368-372. ISBN 9780784479346 (doi:10.1061/9780784479346.043)
Grassl, P. and Athanasiadis, I. (2015) 3D Modelling of the Influence of Microcracking on Mass Transport in Concrete. In: Concreep 10, Vienna, Austria, 21-23 Sep 2015, pp. 373-376. (doi:10.1061/9780784479346.044)
Big-Alabo, A., Harrison, P. and Cartmell, M. P. (2015) Contact model for elastoplastic analysis of half-space indentation by a spherical impactor.Computers and Structures, 151, pp. 20-29. (doi:10.1016/j.compstruc.2015.01.005)
Schubert, G. and Harrison, P. (2015) Large-strain behaviour of Magneto-Rheological Elastomers tested under uniaxial compression and tension, and pure shear deformations. Polymer Testing, 42, pp. 122-134. (doi:10.1016/j.polymertesting.2015.01.008)
Big-Alabo, A., Harrison, P. and Cartmell, M. P. (2015) Preliminary Investigations of the Low-Velocity Impact Response of a Smart Trimorph Plate for Active Damage Mitigation. In: COMPDYN 2015: 5th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Crete Island, Greece, 25-27 May 2015
Harrison, P., Matos, Y. and Álvarez, M. F. (2015) Modelling of Forming Mechanics of Engineering Fabrics Using a Mutually Constrained Pantographic Beam and Membrane Mesh. In: Catania Workshop on Computational Mechanics and Applications of Generalized Continua to Materials with Microstructure, Catania, Italy, 29-31 Oct 2015
Harrison, P. and Matos, Y. B. (2015) Beyond Shear Characterisation: Determining the Flexural Moduli of Engineering Fabrics Using a Modified Uniaxial Bias Extension Test. In: ESMC 2015: 9th European Solid Mechanics Conference, Madrid, Spain, 6-10 July 2015
Upadhyaya, P. and Kumar, S. (2015) Micromechanics of stress transfer through the interphase in fiber-reinforced composites. Mechanics of Materials, 89, pp. 190-201. (doi: 10.1016/j.mechmat.2015.06.012)
Wang, Z. and Li, P. (2015) Dynamic failure and fracture mechanism in alumina ceramics: Experimental observations and finite element modelling. Ceramics International, 41(10 PtA), pp. 12763-12772. (doi:10.1016/j.ceramint.2015.06.110)
Wang, Z. and Li, P. (2015) Characterisation of dynamic behaviour of alumina ceramics: evaluation of stress uniformity. AIP Advances, 5(10), 107224. (doi:10.1063/1.4934793)
Huang, R. and Li, P. (2015) Elastic behaviour and failure mechanism in epoxy syntactic foams: the effect of glass microballoon volume fractions. Composites Part B: Engineering, 78, pp. 401-408. (doi:10.1016/j.compositesb.2015.04.002)
Li, P. (2015) Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 622, pp. 114-120.(doi:10.1016/j.msea.2014.11.028)
Liu, T., Huang, R. and Li, P. (2015) Cone-beam CT reconstruction along any orientation of interest. Journal of X-Ray Science and Technology, 23(6), pp. 773-782. (doi:10.3233/XST-150527) (PMID:26756412)
Liu, Y. , Dong, H., Lohse, N. and Petrovic, S. (2015) Reducing environmental impact of production during a Rolling Blackout policy: A multi-objective schedule optimisation approach. Journal of Cleaner Production, 102, pp. 418-427.(doi:10.1016/j.jclepro.2015.04.038)
Javili, A., Chatzigeorgiou, G., McBride, A. , Steinmann, P. and Linder, C. (2015) Computational homogenization of nano-materials accounting for size effects via surface elasticity. GAMM-Mitteilungen, 38(2), pp. 285-312. (doi:10.1002/gamm.201510016)
McBride, A. , Bargmann, S. and Reddy, B. D. (2015) A computational investigation of a model of single-crystal gradient thermoplasticity that accounts for the stored energy of cold work and thermal annealing. Computational Mechanics, 55(4), pp. 755-769. (doi:10.1007/s00466-015-1134-5)
Grieshaber, B.J., McBride, A.T. and Reddy, B.D. (2015) Uniformly convergent interior penalty methods using multilinear approximations for problems in elasticity. SIAM: Journal on Numerical Analysis, 53(5), pp. 2255-2278. (doi:10.1137/140966253)
Nowell, D., Mulvihill, D. , Parel, K. and Paynter, R.J. (2015) Measurement and Modelling of Contact Stiffness for Rough Contacts. 42nd Leeds-Lyon Symposium on Tribology, Lyon, France, 7-9 Sept 2015.
Smerdova, O., Sutcliffe, M. P.F. and Mulvihill, D. M. (2015) Real Area of Contact in Carbon Fabric Forming. In: 20th International Conference on Composite Materials (ICCM20), Copenhagen, Denmark, 19-24 Jul 2015,
Dong, H., Unluer, C. , Al-Tabbaa, A. and Yang, E.-H. (2015) Feasibility Study of Synthesizing MgO from Reject Brine. 14th International Congress on the Chemistry of Cement, Beijing, China, 13-16 Oct 2015.
Unluer, C. (2015) Novel Cements with Optimized Carbon Capture Capabilities: Importance of Aggregate Particle Size Distribution and Gap Grading. 14th International Congress on the Chemistry of Cement, Beijing, China, 13-16 Oct 2015.
Unluer, C. and Al-Tabbaa, A. (2015) The role of brucite, ground granulated blastfurnace slag, and magnesium silicates in the carbonation and performance of MgO cements. Construction and Building Materials, 94, pp. 629-643. (doi: 10.1016/j.conbuildmat.2015.07.105)
Unluer, C. (2015) Development of Novel Cements with Optimized Carbon Capture Capabilities. International Conference on Civil and Environmental Engineering, Cappadocia, Turkey, 20-23 May 2015.
Unluer, C. (2015) Development of Novel Cements with Optimized Carbon Capture Capabilities. International Concrete Sustainability Conference, Miami, FL, USA, 11-13 May 2015.
Wielewski, E. , Arthington, M.R., Siviour, C.R. and Petrinic, N. (2015) Characterising the effects of strain rate, crystallographic texture and direction of loading on the mechanical behaviour of Ti-6Al-4V. Journal of Dynamic Behavior of Materials, 1(4), pp. 462-471. (doi:10.1007/s40870-015-0040-4)
Wielewski, E. , Menasche, D. B., Callahan, P. G. and Suter, R. (2015) 3-D α colony characterisation and prior-β grain reconstruction of a lamellar Ti-6Al-4V specimen using near-field high energy x-ray diffraction microscopy. Journal of Applied Crystallography, 48(4), pp. 1165-1171. (doi:10.1107/S1600576715011139)
Barbera, D. and Chen, H. (2015) Creep rupture assessment by a robust creep data interpolation using the Linear Matching Method. European Journal of Mechanics - A/Solids, 54, pp. 267-279.(doi:10.1016/j.euromechsol.2015.07.003)
Barbera, D., Chen, H. and Liu, Y. (2015) On the Creep Fatigue Behaviour of Metal Matrix Composites. In: 14th International Conference on Pressure Vessel Technology, Shanghai, China, 23-25 Sep 2015, pp. 1121-1136. (doi:10.1016/j.proeng.2015.12.277)
Mathieson, A., Feeney, A., Tweedie, A. and Lucas, M. (2015) Ultrasonic Biopsy Needle Based on the Class IV Flextensional Configuration. In: 2015 IEEE International Ultrasonics Symposium, Taipei, Taiwan, 21-24 Oct 2015, pp. 1-4. (doi:10.1109/ULTSYM.2015.0213)
Feeney, A. and Lucas, M. (2015) Differential scanning calorimetry of superelastic Nitinol for tunable cymbal transducers. Journal of Intelligent Material Systems and Structures, 27(10), pp. 1376-1387. (doi: 10.1177/1045389X15591383)
Feeney, A., Tweedie, A., Mathieson, A. and Lucas, M. (2015) A Miniaturized Class IV Flextensional Ultrasonic Transducer. In: 44th UIA Symposium, Washington DC, USA, 20-22 Apr 2015
Feeney, A. and Lucas, M. (2015) Differential Scanning Calorimetry of Superelastic Nitinol for Tuneable Devices. In: 10th International Conference on Advances in Experimental Mechanics, Edinburgh, Scotland, 1-3 Sep 2015
Zarif Karimi, N., Fotouhi, M. , Saeedifar, M., Minak, G. and Ahmadi Najafabadi, M. (2015) Inter-laminar Fracture Toughness Measurement of the Mixed-mode Delamination Using Acoustic Emission Technique. 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal, 15-18 Jun 2015.
Mohammadi, R., Saeedifar, M., Toudeshky, H. H., Najafabadi, M. A. and Fotouhi, M. (2015) Prediction of delamination growth in carbon/epoxy composites using a novel acoustic emission-based approach. Journal of Reinforced Plastics and Composites, 34(11), pp. 868-878. (doi: 10.1177/0731684415583166)
Saeedifar, M., Fotouhi, M. , Ahmadi Najafabadi, M. and Hosseini Toudeshky, H. (2015) Prediction of delamination growth in laminated composites using acoustic emission and Cohesive Zone Modeling techniques. Composite Structures, 124, pp. 120-127.(doi: 10.1016/j.compstruct.2015.01.003)
Fotouhi, M. , Saeedifar, M., Sadeghi, S., Ahmadi Najafabadi, M. and Minak, G. (2015) Investigation of the damage mechanisms for mode I delamination growth in foam core sandwich composites using acoustic emission. Structural Health Monitoring, 14(3), pp. 265-280. (doi: 10.1177/1475921714568403)
Brugo, T.M., Minak, G., Zucchelli, A., Saghafi, H. and Fotouhi, M. (2015) An investigation on the fatigue based delamination of woven carbon-epoxy composite laminates reinforced with polyamide nanofibers. Procedia Engineering, 109, pp. 65-72. (doi: 10.1016/j.proeng.2015.06.208)
Grégoire, D., Verdon, L., Lefort, V., Grassl, P. , Saliba, J., Regoin, J.-P., Loukili, A. and Pijaudier-Cabot, G. (2015) Mesoscale analysis of failure in quasi-brittle materials: comparison between lattice model and acoustic emission data. International Journal for Numerical and Analytical Methods in Geomechanics, 39(15), pp. 1639-1664. (doi: 10.1002/nag.2363)
Xenos, D., Grégoire, D., Morel, S. and Grassl, P. (2015) Calibration of nonlocal models for tensile fracture in quasi-brittle heterogeneous materials. Journal of the Mechanics and Physics of Solids, 82, pp. 48-60. (doi: 10.1016/j.jmps.2015.05.019)
Grassl, P. , Fahy, C., Gallipoli, D. and Wheeler, S.J. (2015) On a 2D hydro-mechanical lattice approach for modelling hydraulic fracture. Journal of the Mechanics and Physics of Solids, 93, pp. 64-73. (doi: 10.1016/j.jmps.2014.11.011)
Athanasiadis, I., Wheeler, S. and Grassl, P. (2015) Modelling the Time Dependence of Transport Properties of Porous Materials. In: CONCREEP 10: 10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, Vienna, Austria, 21-23 Sep 2015, pp. 368-372. ISBN 9780784479346 (doi:10.1061/9780784479346.043)
Grassl, P. and Athanasiadis, I. (2015) 3D Modelling of the Influence of Microcracking on Mass Transport in Concrete. In: Concreep 10, Vienna, Austria, 21-23 Sep 2015, pp. 373-376. (doi:10.1061/9780784479346.044)
Big-Alabo, A., Harrison, P. and Cartmell, M. P. (2015) Contact model for elastoplastic analysis of half-space indentation by a spherical impactor.Computers and Structures, 151, pp. 20-29. (doi:10.1016/j.compstruc.2015.01.005)
Schubert, G. and Harrison, P. (2015) Large-strain behaviour of Magneto-Rheological Elastomers tested under uniaxial compression and tension, and pure shear deformations. Polymer Testing, 42, pp. 122-134. (doi:10.1016/j.polymertesting.2015.01.008)
Big-Alabo, A., Harrison, P. and Cartmell, M. P. (2015) Preliminary Investigations of the Low-Velocity Impact Response of a Smart Trimorph Plate for Active Damage Mitigation. In: COMPDYN 2015: 5th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Crete Island, Greece, 25-27 May 2015
Harrison, P., Matos, Y. and Álvarez, M. F. (2015) Modelling of Forming Mechanics of Engineering Fabrics Using a Mutually Constrained Pantographic Beam and Membrane Mesh. In: Catania Workshop on Computational Mechanics and Applications of Generalized Continua to Materials with Microstructure, Catania, Italy, 29-31 Oct 2015
Harrison, P. and Matos, Y. B. (2015) Beyond Shear Characterisation: Determining the Flexural Moduli of Engineering Fabrics Using a Modified Uniaxial Bias Extension Test. In: ESMC 2015: 9th European Solid Mechanics Conference, Madrid, Spain, 6-10 July 2015
Upadhyaya, P. and Kumar, S. (2015) Micromechanics of stress transfer through the interphase in fiber-reinforced composites. Mechanics of Materials, 89, pp. 190-201. (doi: 10.1016/j.mechmat.2015.06.012)
Wang, Z. and Li, P. (2015) Dynamic failure and fracture mechanism in alumina ceramics: Experimental observations and finite element modelling. Ceramics International, 41(10 PtA), pp. 12763-12772. (doi:10.1016/j.ceramint.2015.06.110)
Wang, Z. and Li, P. (2015) Characterisation of dynamic behaviour of alumina ceramics: evaluation of stress uniformity. AIP Advances, 5(10), 107224. (doi:10.1063/1.4934793)
Huang, R. and Li, P. (2015) Elastic behaviour and failure mechanism in epoxy syntactic foams: the effect of glass microballoon volume fractions. Composites Part B: Engineering, 78, pp. 401-408. (doi:10.1016/j.compositesb.2015.04.002)
Li, P. (2015) Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 622, pp. 114-120.(doi:10.1016/j.msea.2014.11.028)
Liu, T., Huang, R. and Li, P. (2015) Cone-beam CT reconstruction along any orientation of interest. Journal of X-Ray Science and Technology, 23(6), pp. 773-782. (doi:10.3233/XST-150527) (PMID:26756412)
Liu, Y. , Dong, H., Lohse, N. and Petrovic, S. (2015) Reducing environmental impact of production during a Rolling Blackout policy: A multi-objective schedule optimisation approach. Journal of Cleaner Production, 102, pp. 418-427.(doi:10.1016/j.jclepro.2015.04.038)
Javili, A., Chatzigeorgiou, G., McBride, A. , Steinmann, P. and Linder, C. (2015) Computational homogenization of nano-materials accounting for size effects via surface elasticity. GAMM-Mitteilungen, 38(2), pp. 285-312. (doi:10.1002/gamm.201510016)
McBride, A. , Bargmann, S. and Reddy, B. D. (2015) A computational investigation of a model of single-crystal gradient thermoplasticity that accounts for the stored energy of cold work and thermal annealing. Computational Mechanics, 55(4), pp. 755-769. (doi:10.1007/s00466-015-1134-5)
Grieshaber, B.J., McBride, A.T. and Reddy, B.D. (2015) Uniformly convergent interior penalty methods using multilinear approximations for problems in elasticity. SIAM: Journal on Numerical Analysis, 53(5), pp. 2255-2278. (doi:10.1137/140966253)
Nowell, D., Mulvihill, D. , Parel, K. and Paynter, R.J. (2015) Measurement and Modelling of Contact Stiffness for Rough Contacts. 42nd Leeds-Lyon Symposium on Tribology, Lyon, France, 7-9 Sept 2015.
Smerdova, O., Sutcliffe, M. P.F. and Mulvihill, D. M. (2015) Real Area of Contact in Carbon Fabric Forming. In: 20th International Conference on Composite Materials (ICCM20), Copenhagen, Denmark, 19-24 Jul 2015,
Dong, H., Unluer, C. , Al-Tabbaa, A. and Yang, E.-H. (2015) Feasibility Study of Synthesizing MgO from Reject Brine. 14th International Congress on the Chemistry of Cement, Beijing, China, 13-16 Oct 2015.
Unluer, C. (2015) Novel Cements with Optimized Carbon Capture Capabilities: Importance of Aggregate Particle Size Distribution and Gap Grading. 14th International Congress on the Chemistry of Cement, Beijing, China, 13-16 Oct 2015.
Unluer, C. and Al-Tabbaa, A. (2015) The role of brucite, ground granulated blastfurnace slag, and magnesium silicates in the carbonation and performance of MgO cements. Construction and Building Materials, 94, pp. 629-643. (doi: 10.1016/j.conbuildmat.2015.07.105)
Unluer, C. (2015) Development of Novel Cements with Optimized Carbon Capture Capabilities. International Conference on Civil and Environmental Engineering, Cappadocia, Turkey, 20-23 May 2015.
Unluer, C. (2015) Development of Novel Cements with Optimized Carbon Capture Capabilities. International Concrete Sustainability Conference, Miami, FL, USA, 11-13 May 2015.
Wielewski, E. , Arthington, M.R., Siviour, C.R. and Petrinic, N. (2015) Characterising the effects of strain rate, crystallographic texture and direction of loading on the mechanical behaviour of Ti-6Al-4V. Journal of Dynamic Behavior of Materials, 1(4), pp. 462-471. (doi:10.1007/s40870-015-0040-4)
Wielewski, E. , Menasche, D. B., Callahan, P. G. and Suter, R. (2015) 3-D α colony characterisation and prior-β grain reconstruction of a lamellar Ti-6Al-4V specimen using near-field high energy x-ray diffraction microscopy. Journal of Applied Crystallography, 48(4), pp. 1165-1171. (doi:10.1107/S1600576715011139)
2014
Feeney, A. and Lucas, M. (2014) Smart cymbal transducers with nitinol end caps tunable to multiple operating frequencies. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 61(10), pp. 1709-1719. (doi: 10.1109/TUFFC.2013.006231)
Harkness, P. , McRobb, M. , Lützkendorf, P., Milligan, R., Feeney, A. and Clark, C. (2014) Development status of AEOLDOS - a deorbit module for small satellites. Advances in Space Research, 54(1), pp. 82-91. (doi: 10.1016/j.asr.2014.03.022)
Bejarano, F., Feeney, A. and Lucas, M. (2014) A cymbal transducer for power ultrasonics applications. Sensors and Actuators A: Physical, 210, pp. 182-189. (doi: 10.1016/j.sna.2014.02.024)
Feeney, A. and Lucas, M. (2014) Characterisation of Nitinol for the Design of Tuneable Transducers. In: 2014 International Conference on Experimental Mechanics, Cambridge, England, 7-11 Jul 2014
Pashmforoush, F., Khamedi, R., Fotouhi, M. , Hajikhani, M. and Ahmadi, M. (2014) Damage classification of sandwich composites using acoustic emission technique and k-means genetic algorithm. Journal of Nondestructive Evaluation, 33(4), pp. 481-492.(doi: 10.1007/s10921-014-0243-y)
Saeedifar, M., Fotouhi, M. , Najafabadi, M. A. and Toudeshky, H. H. (2014) Interlaminar fracture toughness evaluation in glass/epoxy composites using Acoustic Emission and Finite Element Methods. Journal of Materials Engineering and Performance, 24(1), pp. 373-384. (doi: 10.1007/s11665-014-1291-2)
Fotouhi, M. and Ahmadi Najafabadi, M. (2014) Investigation of the mixed-mode delamination in polymer-matrix composites using acoustic emission technique. Journal of Reinforced Plastics and Composites, 33(19), pp. 1767-1782. (doi: 10.1177/0731684414544391)
Mohammadi, R., Saeedifar, M., Fotouhi, M. , Teymuri, C. and Najafabadi, M. A. (2014) Determination of fracture toughness of heat treated AISI D2 steel using Finite Element and Acoustic Emission methods. Journal of Modares Mechanical Engineering, 14(11), pp. 1-8.
Saeedifar, M., Fotouhi, M. , Mohammadi, R., Ahmadi, M., Teymuri, C. and Hajikhani, M. (2014) Classification of damage mechanisms during delamination growth in sandwich composites by acoustic emission. Journal of Modares Mechanical Engineering, 14(6), pp. 144-152.
Saeedifar, M., Fotouhi, M. , Mohammadi, R., Najafabadi, M. A., Teymuri, C. and Toudeshky, H. H. (2014) Investigation of delamination and interlaminar fracture toughness assessment of glass/epoxy composite by acoustic emission. Journal of Modares Mechanical Engineering, 14(4), pp. 1-11.
Dastjerdi, P. B., Fotouhi, M. , Fotouhi, S. and Ahmadi, M. (2014) Acoustic emission based study to monitor the initiation and growth of delamination in composite materials. Journal of Modares Mechanical Engineering, 14(3), pp. 78-84.
Fotouhi, M. , Belalpour Dastjerdi, P. and Ahmadi, M. (2014) Acoustic emission based method to characterize glass/epoxy composite damages during 3-point bending test. International Journal of Material Sciences, 4(1), p. 22. (doi: 10.14355/ijmsci.2014.0401.04)
Fotouhi, M. , Heidary, H., Pashmforoush, F. and Ahmadi, M. (2014) Acoustic Emission Based Study to Characterize Delamination Damage in Laminated Composite Materials. IREC 2014, Tehran, Iran, 2014.
Fotouhi, M. , Hosseini, K., Shallo, M. and Ahmadi, M. (2014) Study of Delamination Damage in Composites Laminates Using Acoustic Emission Technique. In: 4th International Conference on Acoustics and Vibration (ISAV 2014), Tehran, Iran, 10-11 December 2014,
Fotouhi, M. , Poursoleimani, H. and Fotouhi, S. (2014) Experimental Study of the Mechanical and Vibrational Behaviors of Glass-Reinforced Aluminum Laminates. In: 4th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-4), Tehran, Iran, 16-17 December 2014,
Grassl, P. , Xenos, D., Jirásek, M. and Horák, M. (2014) Evaluation of nonlocal approaches for modelling fracture near nonconvex boundaries. International Journal of Solids and Structures, 51(18), pp. 3239-3251. (doi: 10.1016/j.ijsolstr.2014.05.023)
Athanasiadis, I., Wheeler, S. and Grassl, P. (2014) Three-dimensional network modelling of the influence of microstructure of concrete on water transport. In: Computational Modelling of Concrete Structures (Euro-C), St. Anton Am Arlberg, Austria, 24-27 Mar 2014, pp. 775-780. ISBN 9781138001459 (doi:10.1201/b16645-87)
Athanasiadis, I., Wheeler, S. and Grassl, P. (2014) Three-dimensional network modelling of the influence of microstructure on mass transport in unsaturated soils. In: International Symposium on Geomechanics from Micro to Macro, Cambridge, UK, 01-03 Sep 2014, pp. 901-906. ISBN 9781138027077 (doi:10.1201/b17395-161)
Fahy, C., Grassl, P. and Gallipoli, D. (2014) Corrosion induced cracking of reinforced concrete. In: Andrade, C., Gulikers, J. and Polder, R. (eds.) Durability of Reinforced Concrete from Composition to Protection: Selected Papers of the 6th International RILEM PhD Workshop held in Delft, The Netherlands, July 4-5, 2013. Springer International Publishing, pp. 77-86. ISBN 9783319099200 (doi:10.1007/978-3-319-09921-7_8)
Grassl, P. , Fahy, C., Wheeler, S. and Gallipoli, D. (2014) A 2D hydro-mechanical lattice approach for modelling corrosion induced cracking of reinforced concrete. In: Computational Modelling of Concrete Structures (Euro-C), St. Anton Am Arlberg, Austria, 24-27 Mar 2014, pp. 759-764. ISBN 9781138001459 (doi:10.1201/b16645-85)
Lefort, V., Pijaudier-Cabot, G., Grégoire, D. and Grassl, P. (2014) Correlations in the mesoscale modelling of fracture of quasi-brittle materials—extracting internal lengths. In: Computational Modelling of Concrete Structures (Euro-C), St. Anton Am Arlberg, Austria, 24-27 Mar 2014, pp. 393-403. ISBN 9781138001459 (doi:10.1201/b16645-44)
Xenos, D. and Grassl, P. (2014) Comparison of nonlocal and crack-band damage-plasticity approaches for modelling the failure of reinforced concrete structures. In: Computational Modelling of Concrete Structures (Euro-C), St. Anton Am Arlberg, Austria, 24-27 Mar 2014, pp. 513-520. (doi:10.1201/b16645-57)
Grustan Gutierrez, E. , Borrajo-Pelaez, R. and Gamero-Castaño, M. (2014) Fast etching of microscale structures by bombardment with electrosprayed nanodroplets. International Symposium on Microelectronics, 2014(1), pp. 466-470. (doi: 10.4071/isom-wa36)
Härtel, F. and Harrison, P. (2014) Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics. Composites Part A: Applied Science and Manufacturing, 37, pp. 61-69. (doi:10.1016/j.compositesa.2014.08.011)
Biglari, A., Harrison, P. and Bićanić, N. (2014) Quasi-hinge beam element implemented within the hybrid force-based method. Computers and Structures, 137, pp. 31-46. (doi:10.1016/j.compstruc.2013.10.016)
Big-Alabo, A., Harrison, P. and Cartmell, M. P. (2014) Algorithm for the solution of elastoplastic half-space impact: force-indentation linearisation method. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 229(5), pp. 850-858.(doi:10.1177/0954406214541431)
Guo, Z., Shi, X., Chen, Y., Chen, H., Peng, X. and Harrison, P. (2014) Mechanical modeling of incompressible particle-reinforced neo-Hookean composites based on numerical homogenization. Mechanics of Materials, 70, pp. 1-17. (doi:10.1016/j.mechmat.2013.11.004)
Ahn, H., Na, W., Han, S., Harrison, P., Park, J. K., Jeong, E. and Yu, W.-R. (2014) Characterizations of STF-treated aramid fabrics using picture frame test. Key Engineering Materials, 611-12, pp. 344-348. (doi:10.4028/www.scientific.net/KEM.611-612.344)
Big-Alabo, A., Harrison, P. and Cartmell, M. P. (2014) Elastoplastic half-space impact analysis using a novel contact model that accounts for post-yield effects. In: EURODYN 2014: 9th International Conference on Structural Dynamics, Porto, Portugal, 30 June - 2 July 2014
Li, P., Wang, Z., Petrinic, N. and Siviour, C.R. (2014) Deformation behaviour of stainless steel microlattice structures by selective laser melting. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 614, pp. 116-121. (doi:10.1016/j.msea.2014.07.015)
Huang, Y., Wei, C., Chen, L. and Li, P. (2014) Quantitative correlation between geometric parameters and stress concentration of corrosion pits. Engineering Failure Analysis, 44, pp. 168-178. (doi:10.1016/j.engfailanal.2014.05.020)
Badica, P., Grasso, S., Borodianska, H., Xie, S. S., Li, P., Tatarko, P., Reece, M. J., Sakka, Y. and Vasylkiv, O. (2014) Tough and dense boron carbide obtained by high-pressure (300 MPa) and low-temperature (1600°C) spark plasma sintering. Journal of the Ceramic Society of Japan, 122(1424), pp. 271-275. (doi:10.2109/jcersj2.122.271)
Badica, P., Borodianska, H., Xie, S., Zhao, T., Demirskyi, D., Li, P., Tok, A. I.Y., Sakka, Y. and Vasylkiv, O. (2014) Toughness control of boron carbide obtained by spark plasma sintering in nitrogen atmosphere. Ceramics International, 40(2), pp. 3053-3061.(doi:10.1016/j.ceramint.2013.09.141)
Song, X., Fong, K.S., Oon, S.R., Tiong, W.R., Li, P.F., Korsunsky, A. M. and Danno, A. (2014) Diametrical growth in the forward flow forming process: simulation, validation, and prediction. International Journal of Advanced Manufacturing Technology, 71(1-4), pp. 207-217. (doi:10.1007/s00170-013-5492-x)
Liu, Y. , Dong, H., Lohse, N., Petrovic, S. and Gindy, N. (2014) An investigation into minimising total energy consumption and total weighted tardiness in job shops. Journal of Cleaner Production, 65, pp. 87-96. (doi:10.1016/j.jclepro.2013.07.060)
Javili, A., McBride, A. , Steinmann, P. and Reddy, B.D. (2014) A unified computational framework for bulk and surface elasticity theory: a curvilinear-coordinate-based finite element methodology.Computational Mechanics, 54(3), pp. 745-762. (doi:10.1007/s00466-014-1030-4)
Povall, T.M., McBride, A.T. and Reddy, B.D. (2014) Finite element simulation of large-strain single-crystal viscoplasticity: an investigation of various hardening relations. Computational Materials Science, 81, pp. 386-396. (doi:10.1016/j.commatsci.2013.08.043)
Nowell, D., Mulvihill, D. , Brunskill, H., Kartal, M.E. and Dwyer-Joyce, R. (2014) Measurement and Modelling of Interface Stiffness in Frictional Contacts. In: 5th World Tribology Congress (WTC 2013), Torino, Italy, 8-13 Sept 2013, pp. 2232-2235. ISBN 9781634393522
Unluer, C. (2014) Improving the Carbonation Potential of MgO-cement Porous Blocks through Different Aggregate Profiles. 34th Cement and Concrete Science Conference, Sheffield, UK, 14-16 Sep 2015.
Unluer, C. and Al-Tabbaa, A. (2014) Characterization of light and heavy hydrated magnesium carbonates using thermal analysis. Journal of Thermal Analysis and Calorimetry, 115(1), pp. 595-607. (doi: 10.1007/s10973-013-3300-3)
Unluer, C. and Al-Tabbaa, A. (2014) Enhancing the carbonation of MgO cement porous blocks through improved curing conditions. Cement and Concrete Research, 59, pp. 55-65. (doi: 10.1016/j.cemconres.2014.02.005)
Hazell, P. J., Appleby-Thomas, G. J., Wielewski, E. and Escobedo, J. P. (2014) The shock and spall response of three industrially important hexagonal close-packed metals: magnesium, titanium and zirconium. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 372(2023), 20130204. (doi:10.1098/rsta.2013.0204) (PMCID:25071240)
Harkness, P. , McRobb, M. , Lützkendorf, P., Milligan, R., Feeney, A. and Clark, C. (2014) Development status of AEOLDOS - a deorbit module for small satellites. Advances in Space Research, 54(1), pp. 82-91. (doi: 10.1016/j.asr.2014.03.022)
Bejarano, F., Feeney, A. and Lucas, M. (2014) A cymbal transducer for power ultrasonics applications. Sensors and Actuators A: Physical, 210, pp. 182-189. (doi: 10.1016/j.sna.2014.02.024)
Feeney, A. and Lucas, M. (2014) Characterisation of Nitinol for the Design of Tuneable Transducers. In: 2014 International Conference on Experimental Mechanics, Cambridge, England, 7-11 Jul 2014
Pashmforoush, F., Khamedi, R., Fotouhi, M. , Hajikhani, M. and Ahmadi, M. (2014) Damage classification of sandwich composites using acoustic emission technique and k-means genetic algorithm. Journal of Nondestructive Evaluation, 33(4), pp. 481-492.(doi: 10.1007/s10921-014-0243-y)
Saeedifar, M., Fotouhi, M. , Najafabadi, M. A. and Toudeshky, H. H. (2014) Interlaminar fracture toughness evaluation in glass/epoxy composites using Acoustic Emission and Finite Element Methods. Journal of Materials Engineering and Performance, 24(1), pp. 373-384. (doi: 10.1007/s11665-014-1291-2)
Fotouhi, M. and Ahmadi Najafabadi, M. (2014) Investigation of the mixed-mode delamination in polymer-matrix composites using acoustic emission technique. Journal of Reinforced Plastics and Composites, 33(19), pp. 1767-1782. (doi: 10.1177/0731684414544391)
Mohammadi, R., Saeedifar, M., Fotouhi, M. , Teymuri, C. and Najafabadi, M. A. (2014) Determination of fracture toughness of heat treated AISI D2 steel using Finite Element and Acoustic Emission methods. Journal of Modares Mechanical Engineering, 14(11), pp. 1-8.
Saeedifar, M., Fotouhi, M. , Mohammadi, R., Ahmadi, M., Teymuri, C. and Hajikhani, M. (2014) Classification of damage mechanisms during delamination growth in sandwich composites by acoustic emission. Journal of Modares Mechanical Engineering, 14(6), pp. 144-152.
Saeedifar, M., Fotouhi, M. , Mohammadi, R., Najafabadi, M. A., Teymuri, C. and Toudeshky, H. H. (2014) Investigation of delamination and interlaminar fracture toughness assessment of glass/epoxy composite by acoustic emission. Journal of Modares Mechanical Engineering, 14(4), pp. 1-11.
Dastjerdi, P. B., Fotouhi, M. , Fotouhi, S. and Ahmadi, M. (2014) Acoustic emission based study to monitor the initiation and growth of delamination in composite materials. Journal of Modares Mechanical Engineering, 14(3), pp. 78-84.
Fotouhi, M. , Belalpour Dastjerdi, P. and Ahmadi, M. (2014) Acoustic emission based method to characterize glass/epoxy composite damages during 3-point bending test. International Journal of Material Sciences, 4(1), p. 22. (doi: 10.14355/ijmsci.2014.0401.04)
Fotouhi, M. , Heidary, H., Pashmforoush, F. and Ahmadi, M. (2014) Acoustic Emission Based Study to Characterize Delamination Damage in Laminated Composite Materials. IREC 2014, Tehran, Iran, 2014.
Fotouhi, M. , Hosseini, K., Shallo, M. and Ahmadi, M. (2014) Study of Delamination Damage in Composites Laminates Using Acoustic Emission Technique. In: 4th International Conference on Acoustics and Vibration (ISAV 2014), Tehran, Iran, 10-11 December 2014,
Fotouhi, M. , Poursoleimani, H. and Fotouhi, S. (2014) Experimental Study of the Mechanical and Vibrational Behaviors of Glass-Reinforced Aluminum Laminates. In: 4th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-4), Tehran, Iran, 16-17 December 2014,
Grassl, P. , Xenos, D., Jirásek, M. and Horák, M. (2014) Evaluation of nonlocal approaches for modelling fracture near nonconvex boundaries. International Journal of Solids and Structures, 51(18), pp. 3239-3251. (doi: 10.1016/j.ijsolstr.2014.05.023)
Athanasiadis, I., Wheeler, S. and Grassl, P. (2014) Three-dimensional network modelling of the influence of microstructure of concrete on water transport. In: Computational Modelling of Concrete Structures (Euro-C), St. Anton Am Arlberg, Austria, 24-27 Mar 2014, pp. 775-780. ISBN 9781138001459 (doi:10.1201/b16645-87)
Athanasiadis, I., Wheeler, S. and Grassl, P. (2014) Three-dimensional network modelling of the influence of microstructure on mass transport in unsaturated soils. In: International Symposium on Geomechanics from Micro to Macro, Cambridge, UK, 01-03 Sep 2014, pp. 901-906. ISBN 9781138027077 (doi:10.1201/b17395-161)
Fahy, C., Grassl, P. and Gallipoli, D. (2014) Corrosion induced cracking of reinforced concrete. In: Andrade, C., Gulikers, J. and Polder, R. (eds.) Durability of Reinforced Concrete from Composition to Protection: Selected Papers of the 6th International RILEM PhD Workshop held in Delft, The Netherlands, July 4-5, 2013. Springer International Publishing, pp. 77-86. ISBN 9783319099200 (doi:10.1007/978-3-319-09921-7_8)
Grassl, P. , Fahy, C., Wheeler, S. and Gallipoli, D. (2014) A 2D hydro-mechanical lattice approach for modelling corrosion induced cracking of reinforced concrete. In: Computational Modelling of Concrete Structures (Euro-C), St. Anton Am Arlberg, Austria, 24-27 Mar 2014, pp. 759-764. ISBN 9781138001459 (doi:10.1201/b16645-85)
Lefort, V., Pijaudier-Cabot, G., Grégoire, D. and Grassl, P. (2014) Correlations in the mesoscale modelling of fracture of quasi-brittle materials—extracting internal lengths. In: Computational Modelling of Concrete Structures (Euro-C), St. Anton Am Arlberg, Austria, 24-27 Mar 2014, pp. 393-403. ISBN 9781138001459 (doi:10.1201/b16645-44)
Xenos, D. and Grassl, P. (2014) Comparison of nonlocal and crack-band damage-plasticity approaches for modelling the failure of reinforced concrete structures. In: Computational Modelling of Concrete Structures (Euro-C), St. Anton Am Arlberg, Austria, 24-27 Mar 2014, pp. 513-520. (doi:10.1201/b16645-57)
Grustan Gutierrez, E. , Borrajo-Pelaez, R. and Gamero-Castaño, M. (2014) Fast etching of microscale structures by bombardment with electrosprayed nanodroplets. International Symposium on Microelectronics, 2014(1), pp. 466-470. (doi: 10.4071/isom-wa36)
Härtel, F. and Harrison, P. (2014) Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics. Composites Part A: Applied Science and Manufacturing, 37, pp. 61-69. (doi:10.1016/j.compositesa.2014.08.011)
Biglari, A., Harrison, P. and Bićanić, N. (2014) Quasi-hinge beam element implemented within the hybrid force-based method. Computers and Structures, 137, pp. 31-46. (doi:10.1016/j.compstruc.2013.10.016)
Big-Alabo, A., Harrison, P. and Cartmell, M. P. (2014) Algorithm for the solution of elastoplastic half-space impact: force-indentation linearisation method. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 229(5), pp. 850-858.(doi:10.1177/0954406214541431)
Guo, Z., Shi, X., Chen, Y., Chen, H., Peng, X. and Harrison, P. (2014) Mechanical modeling of incompressible particle-reinforced neo-Hookean composites based on numerical homogenization. Mechanics of Materials, 70, pp. 1-17. (doi:10.1016/j.mechmat.2013.11.004)
Ahn, H., Na, W., Han, S., Harrison, P., Park, J. K., Jeong, E. and Yu, W.-R. (2014) Characterizations of STF-treated aramid fabrics using picture frame test. Key Engineering Materials, 611-12, pp. 344-348. (doi:10.4028/www.scientific.net/KEM.611-612.344)
Big-Alabo, A., Harrison, P. and Cartmell, M. P. (2014) Elastoplastic half-space impact analysis using a novel contact model that accounts for post-yield effects. In: EURODYN 2014: 9th International Conference on Structural Dynamics, Porto, Portugal, 30 June - 2 July 2014
Li, P., Wang, Z., Petrinic, N. and Siviour, C.R. (2014) Deformation behaviour of stainless steel microlattice structures by selective laser melting. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 614, pp. 116-121. (doi:10.1016/j.msea.2014.07.015)
Huang, Y., Wei, C., Chen, L. and Li, P. (2014) Quantitative correlation between geometric parameters and stress concentration of corrosion pits. Engineering Failure Analysis, 44, pp. 168-178. (doi:10.1016/j.engfailanal.2014.05.020)
Badica, P., Grasso, S., Borodianska, H., Xie, S. S., Li, P., Tatarko, P., Reece, M. J., Sakka, Y. and Vasylkiv, O. (2014) Tough and dense boron carbide obtained by high-pressure (300 MPa) and low-temperature (1600°C) spark plasma sintering. Journal of the Ceramic Society of Japan, 122(1424), pp. 271-275. (doi:10.2109/jcersj2.122.271)
Badica, P., Borodianska, H., Xie, S., Zhao, T., Demirskyi, D., Li, P., Tok, A. I.Y., Sakka, Y. and Vasylkiv, O. (2014) Toughness control of boron carbide obtained by spark plasma sintering in nitrogen atmosphere. Ceramics International, 40(2), pp. 3053-3061.(doi:10.1016/j.ceramint.2013.09.141)
Song, X., Fong, K.S., Oon, S.R., Tiong, W.R., Li, P.F., Korsunsky, A. M. and Danno, A. (2014) Diametrical growth in the forward flow forming process: simulation, validation, and prediction. International Journal of Advanced Manufacturing Technology, 71(1-4), pp. 207-217. (doi:10.1007/s00170-013-5492-x)
Liu, Y. , Dong, H., Lohse, N., Petrovic, S. and Gindy, N. (2014) An investigation into minimising total energy consumption and total weighted tardiness in job shops. Journal of Cleaner Production, 65, pp. 87-96. (doi:10.1016/j.jclepro.2013.07.060)
Javili, A., McBride, A. , Steinmann, P. and Reddy, B.D. (2014) A unified computational framework for bulk and surface elasticity theory: a curvilinear-coordinate-based finite element methodology.Computational Mechanics, 54(3), pp. 745-762. (doi:10.1007/s00466-014-1030-4)
Povall, T.M., McBride, A.T. and Reddy, B.D. (2014) Finite element simulation of large-strain single-crystal viscoplasticity: an investigation of various hardening relations. Computational Materials Science, 81, pp. 386-396. (doi:10.1016/j.commatsci.2013.08.043)
Nowell, D., Mulvihill, D. , Brunskill, H., Kartal, M.E. and Dwyer-Joyce, R. (2014) Measurement and Modelling of Interface Stiffness in Frictional Contacts. In: 5th World Tribology Congress (WTC 2013), Torino, Italy, 8-13 Sept 2013, pp. 2232-2235. ISBN 9781634393522
Unluer, C. (2014) Improving the Carbonation Potential of MgO-cement Porous Blocks through Different Aggregate Profiles. 34th Cement and Concrete Science Conference, Sheffield, UK, 14-16 Sep 2015.
Unluer, C. and Al-Tabbaa, A. (2014) Characterization of light and heavy hydrated magnesium carbonates using thermal analysis. Journal of Thermal Analysis and Calorimetry, 115(1), pp. 595-607. (doi: 10.1007/s10973-013-3300-3)
Unluer, C. and Al-Tabbaa, A. (2014) Enhancing the carbonation of MgO cement porous blocks through improved curing conditions. Cement and Concrete Research, 59, pp. 55-65. (doi: 10.1016/j.cemconres.2014.02.005)
Hazell, P. J., Appleby-Thomas, G. J., Wielewski, E. and Escobedo, J. P. (2014) The shock and spall response of three industrially important hexagonal close-packed metals: magnesium, titanium and zirconium. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 372(2023), 20130204. (doi:10.1098/rsta.2013.0204) (PMCID:25071240)
2013
Feeney, A. and Lucas, M. (2013) An Investigation of the Vibration Response of a Superelastic Nitinol Cymbal Transducer. In: 2013 International Congress on Ultrasonics, Singapore, 2-5 May 2013, pp. 321-326. ISBN 9789810759384 (doi:10.3850/978-981-07-5938-4)
Feeney, A. and Lucas, M. (2013) Nitinol Cymbal Transducers for Power Ultrasonics Applications. In: 9th International Conference on Advances in Experimental Mechanics, Cardiff, Wales, 3-5 Sept 2013,
Lucas, M. and Feeney, A. (2013) Smart cymbal transducers with Nitinol end-caps for power ultrasonics applications. In: 2013 IEEE International Ultrasonics Symposium (IUS), Prague, 21-25 July 2013, pp. 1440-1443. (doi:10.1109/ULTSYM.2013.0365)
Fotouhi, M. , Sindi, C. T., Ahmadi, M. and Pashmforoush, F. (2013) Fracture characteristics of AISI D2 tool steel at different tempering temperatures using acoustic emission and fuzzy C-means clustering. Arabian Journal for Science and Engineering, 38(8), pp. 2205-2217. (doi: 10.1007/s13369-013-0579-0)
Fotouhi, M. , Teymuri, C. and Ahmadi, M. (2013) Determination of Metallic Materials Toughness Using Acoustic Emission Monitoring Technique. Iran’s 3rd International Conference on Industrial Automation, Tehran, Iran, 2013.
Mahdian, A., Fotouhi, M. and Ahmadi, M. (2013) Study of the Damage in Laminated Composite Caused by Impact Using Acoustic Emission Method. 3rd
International Conference on Acoustics and Vibration (ISAV2013), Tehran, Iran, 2013.
Grassl, P. , Xenos, D., Nyström, U., Rempling, R. and Gylltoft, K. (2013) CDPM2: a damage-plasticity approach to modelling the failure of concrete. International Journal of Solids and Structures, 50(24), pp. 3805-3816. (doi: 10.1016/j.ijsolstr.2013.07.008)
Fahy, C., Grassl, P. and Gallipoli, D. (2013) A lattice model for liquid transport in unsaturated porous materials. In: First Pan-American Conference on Unsaturated Soils, Cartagena de Indias, Columbia, 20-22 Feb 2013, pp. 507-512. ISBN 9780415620956(doi:10.1201/b14393-79)
Grégoire, D., Grassl, P. , Rojas-Solano, L. B. and Pijaudier-Cabot, G. (2013) Macro and mesoscale models to predict concrete failure and size effects. In: Pijaudier-Cabot, G. and Dufour, F. (eds.) Damage Mechanics of Cementitious Materials and Structures.John Wiley & Sons, Inc., pp. 121-160. ISBN 9781848213401 (doi:10.1002/9781118562086.ch5)
Borrajo-Pelaez, R., Grustan Gutierrez, E. and Gamero-Castano, M. (2013) Sputtering of Si, SiC, InAs, InP, Ge, GaAs, GaSb, and GaN by electrosprayed nanodroplets. Journal of Applied Physics, 114, 184304. (doi: 10.1063/1.4829925)
Alsayednoor, J., Harrison, P. and Guo, Z. (2013) Large strain compressive response of 2-D periodic representative volume element for random foam microstructures. Mechanics of Materials, 66, pp. 7-20. (doi:10.1016/j.mechmat.2013.06.006)
Harrison, P., Gomes, R. and Curado-Correia, N. (2013) Press forming a 0/90 cross-ply advanced thermoplastic composite using the double-dome benchmark geometry. Composites Part A: Applied Science and Manufacturing, 54, pp. 56-69. (doi:10.1016/j.compositesa.2013.06.014)
Abdiwi, F., Harrison, P. and Yu, W.-R. (2013) Effect of tow meander on the shear compliance of woven engineering fabrics measured using the biaxial bias extension test. Key Engineering Materials, 554, pp. 402-409. (doi:10.4028/www.scientific.net/KEM.554-557.402)
Abdiwi, F., Harrison, P. and Yu, W.R. (2013) Modelling the shear-tension coupling of woven engineering fabrics. Advances in Materials Science and Engineering, 2013(786769), (doi:10.1155/2013/786769)
Biglari, A.F. and Harrison, P. (2013) A 3D beam-column element implemented within a hybrid force-based method. In: International Conference on Computational Mechanics, Durham, UK, 25-27 Mar 2013
Harrison, P. and Curado-Correia, N. (2013) Temperature and rate dependent multi-scale shear modelling of molten thermoplastic advanced composties. In: 19th International Conference on Composite Materials, Montreal, Canada, 28 Jul - 2 Aug 2013
Harrison, P., Schubert, G. and Guo, Z. (2013) The behaviour of magneto-rheological elastomers under equi-biaxial tension. In: 19th International Conference on Composite Materials, Montreal, Canada, 28 Jul - 2 Aug 2013
Park, H., Yu, W., Harrison, P. and Guo, Z. (2013) Three-dimensional constitutive equation of shape memory polymers an their composites. In: 19th International Conference on Composite Materials, Montreal, Canada, 28 Jul - 2 Aug 2013
Kumar, S. and Cocks, A.C.F. (2013) Computational modelling of constrained sintering in EB-PVD thermal barrier coatings. Modelling and Simulation in Materials Science and Engineering, 21, 065008. (doi: 10.1088/0965-0393/21/6/065008)
Javili, A., McBride, A. , Mergheim, J., Steinmann, P. and Schmidt, U. (2013) Micro-to-macro transitions for continua with surface structure at the microscale. International Journal of Solids and Structures, 50(16-17), pp. 2561-2572. (doi:10.1016/j.ijsolstr.2013.03.022)
Lamichhane, B. P., McBride, A. T. and Reddy, B. D. (2013) A finite element method for a three-field formulation of linear elasticity based on biorthogonal systems. Computer Methods in Applied Mechanics and Engineering, 258, pp. 109-117. (doi:10.1016/j.cma.2013.02.008)
Javili, A., McBride, A. and Steinmann, P. (2013) Numerical modelling of thermomechanical solids with highly-conductive energetic interfaces. International Journal for Numerical Methods in Engineering, 93(5), pp. 551-574. (doi:10.1002/nme.4402)
Davydov, D., Javili, A., Steinmann, P. and McBride, A. (2013) A comparison of atomistic and surface enhanced continuum approaches at finite temperature. In: Altenbach, H. and Morozov, N.F.(eds.) Surface Effects in Solid Mechanics. Springer-Verlag Berlin, pp. 21-33. ISBN 9783642357824 (doi:10.1007/978-3-642-35783-1_4)
Javili, A., McBride, A. and Steinmann, P. (2013) Thermomechanics of solids with lower-dimensional energetics: On the importance of surface, interface, and curve structures at the nanoscale. A unifying review. Applied Mechanics Reviews, 65(1), 010802. (doi:10.1115/1.4023012)
Mulvihill, D.M. , Brunskill, H., Kartal, M.E., Dwyer-Joyce, R.S. and Nowell, D. (2013) A comparison of contact stiffness measurements obtained by the digital image correlation and ultrasound techniques. Experimental Mechanics, 53(7), pp. 1245-1263. (doi: 10.1007/s11340-013-9718-5)
Unluer, C. and Al-Tabbaa, A. (2013) Impact of hydrated magnesium carbonate additives on the carbonation of reactive MgO cements. Cement and Concrete Research, 54, pp. 87-97. (doi: 10.1016/j.cemconres.2013.08.009)
Yi, Y.L., Liska, M., Unluer, C. and Al-Tabbaa, A. (2013) Initial investigation into the carbonation of MgO for soil stabilisation. In: 18th International Conference on Soil Mechanics and Geotechnical Engineering: Challenges and Innovations in Geotechnics, ICSMGE 2013, Paris Convention Centre Paris, France, 2-6 Sept 2013,
Yi, Y., Liska, M., Akinyugha, A., Unluer, C. and Al-Tabbaa, A. (2013) Preliminary laboratory-scale model auger installation and testing of carbonated soil-MgO columns. Geotechnical Testing Journal, 36(3), pp. 384-393. (doi: 10.1520/GTJ20120052)
Yi, Y., Liska, M., Unluer, C. and Al-Tabbaa, A. (2013) Carbonating magnesia for soil stabilization. Canadian Geotechnical Journal, 50(8), pp. 899-905. (doi: 10.1139/cgj-2012-0364)
Wielewski, E. , Birkbeck, A. and Thomson, R. (2013) Ballistic resistance of spaced multi-layer plate structures: experiments on fibre reinforced plastic targets and an analytical framework for calculating the ballistic limit. Materials and Design, 50, pp. 737-741. (doi:10.1016/j.matdes.2013.03.006)
Wielewski, E. , Appleby-Thomas, G.J., Hazell, P.J. and Hameed, A. (2013) An experimental investigation into the micro-mechanics of spall initiation and propagation in Ti–6Al–4V during shock loading. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 578, pp. 331-339. (doi:10.1016/j.msea.2013.04.055)
Feeney, A. and Lucas, M. (2013) Nitinol Cymbal Transducers for Power Ultrasonics Applications. In: 9th International Conference on Advances in Experimental Mechanics, Cardiff, Wales, 3-5 Sept 2013,
Lucas, M. and Feeney, A. (2013) Smart cymbal transducers with Nitinol end-caps for power ultrasonics applications. In: 2013 IEEE International Ultrasonics Symposium (IUS), Prague, 21-25 July 2013, pp. 1440-1443. (doi:10.1109/ULTSYM.2013.0365)
Fotouhi, M. , Sindi, C. T., Ahmadi, M. and Pashmforoush, F. (2013) Fracture characteristics of AISI D2 tool steel at different tempering temperatures using acoustic emission and fuzzy C-means clustering. Arabian Journal for Science and Engineering, 38(8), pp. 2205-2217. (doi: 10.1007/s13369-013-0579-0)
Fotouhi, M. , Teymuri, C. and Ahmadi, M. (2013) Determination of Metallic Materials Toughness Using Acoustic Emission Monitoring Technique. Iran’s 3rd International Conference on Industrial Automation, Tehran, Iran, 2013.
Mahdian, A., Fotouhi, M. and Ahmadi, M. (2013) Study of the Damage in Laminated Composite Caused by Impact Using Acoustic Emission Method. 3rd
International Conference on Acoustics and Vibration (ISAV2013), Tehran, Iran, 2013.
Grassl, P. , Xenos, D., Nyström, U., Rempling, R. and Gylltoft, K. (2013) CDPM2: a damage-plasticity approach to modelling the failure of concrete. International Journal of Solids and Structures, 50(24), pp. 3805-3816. (doi: 10.1016/j.ijsolstr.2013.07.008)
Fahy, C., Grassl, P. and Gallipoli, D. (2013) A lattice model for liquid transport in unsaturated porous materials. In: First Pan-American Conference on Unsaturated Soils, Cartagena de Indias, Columbia, 20-22 Feb 2013, pp. 507-512. ISBN 9780415620956(doi:10.1201/b14393-79)
Grégoire, D., Grassl, P. , Rojas-Solano, L. B. and Pijaudier-Cabot, G. (2013) Macro and mesoscale models to predict concrete failure and size effects. In: Pijaudier-Cabot, G. and Dufour, F. (eds.) Damage Mechanics of Cementitious Materials and Structures.John Wiley & Sons, Inc., pp. 121-160. ISBN 9781848213401 (doi:10.1002/9781118562086.ch5)
Borrajo-Pelaez, R., Grustan Gutierrez, E. and Gamero-Castano, M. (2013) Sputtering of Si, SiC, InAs, InP, Ge, GaAs, GaSb, and GaN by electrosprayed nanodroplets. Journal of Applied Physics, 114, 184304. (doi: 10.1063/1.4829925)
Alsayednoor, J., Harrison, P. and Guo, Z. (2013) Large strain compressive response of 2-D periodic representative volume element for random foam microstructures. Mechanics of Materials, 66, pp. 7-20. (doi:10.1016/j.mechmat.2013.06.006)
Harrison, P., Gomes, R. and Curado-Correia, N. (2013) Press forming a 0/90 cross-ply advanced thermoplastic composite using the double-dome benchmark geometry. Composites Part A: Applied Science and Manufacturing, 54, pp. 56-69. (doi:10.1016/j.compositesa.2013.06.014)
Abdiwi, F., Harrison, P. and Yu, W.-R. (2013) Effect of tow meander on the shear compliance of woven engineering fabrics measured using the biaxial bias extension test. Key Engineering Materials, 554, pp. 402-409. (doi:10.4028/www.scientific.net/KEM.554-557.402)
Abdiwi, F., Harrison, P. and Yu, W.R. (2013) Modelling the shear-tension coupling of woven engineering fabrics. Advances in Materials Science and Engineering, 2013(786769), (doi:10.1155/2013/786769)
Biglari, A.F. and Harrison, P. (2013) A 3D beam-column element implemented within a hybrid force-based method. In: International Conference on Computational Mechanics, Durham, UK, 25-27 Mar 2013
Harrison, P. and Curado-Correia, N. (2013) Temperature and rate dependent multi-scale shear modelling of molten thermoplastic advanced composties. In: 19th International Conference on Composite Materials, Montreal, Canada, 28 Jul - 2 Aug 2013
Harrison, P., Schubert, G. and Guo, Z. (2013) The behaviour of magneto-rheological elastomers under equi-biaxial tension. In: 19th International Conference on Composite Materials, Montreal, Canada, 28 Jul - 2 Aug 2013
Park, H., Yu, W., Harrison, P. and Guo, Z. (2013) Three-dimensional constitutive equation of shape memory polymers an their composites. In: 19th International Conference on Composite Materials, Montreal, Canada, 28 Jul - 2 Aug 2013
Kumar, S. and Cocks, A.C.F. (2013) Computational modelling of constrained sintering in EB-PVD thermal barrier coatings. Modelling and Simulation in Materials Science and Engineering, 21, 065008. (doi: 10.1088/0965-0393/21/6/065008)
Javili, A., McBride, A. , Mergheim, J., Steinmann, P. and Schmidt, U. (2013) Micro-to-macro transitions for continua with surface structure at the microscale. International Journal of Solids and Structures, 50(16-17), pp. 2561-2572. (doi:10.1016/j.ijsolstr.2013.03.022)
Lamichhane, B. P., McBride, A. T. and Reddy, B. D. (2013) A finite element method for a three-field formulation of linear elasticity based on biorthogonal systems. Computer Methods in Applied Mechanics and Engineering, 258, pp. 109-117. (doi:10.1016/j.cma.2013.02.008)
Javili, A., McBride, A. and Steinmann, P. (2013) Numerical modelling of thermomechanical solids with highly-conductive energetic interfaces. International Journal for Numerical Methods in Engineering, 93(5), pp. 551-574. (doi:10.1002/nme.4402)
Davydov, D., Javili, A., Steinmann, P. and McBride, A. (2013) A comparison of atomistic and surface enhanced continuum approaches at finite temperature. In: Altenbach, H. and Morozov, N.F.(eds.) Surface Effects in Solid Mechanics. Springer-Verlag Berlin, pp. 21-33. ISBN 9783642357824 (doi:10.1007/978-3-642-35783-1_4)
Javili, A., McBride, A. and Steinmann, P. (2013) Thermomechanics of solids with lower-dimensional energetics: On the importance of surface, interface, and curve structures at the nanoscale. A unifying review. Applied Mechanics Reviews, 65(1), 010802. (doi:10.1115/1.4023012)
Mulvihill, D.M. , Brunskill, H., Kartal, M.E., Dwyer-Joyce, R.S. and Nowell, D. (2013) A comparison of contact stiffness measurements obtained by the digital image correlation and ultrasound techniques. Experimental Mechanics, 53(7), pp. 1245-1263. (doi: 10.1007/s11340-013-9718-5)
Unluer, C. and Al-Tabbaa, A. (2013) Impact of hydrated magnesium carbonate additives on the carbonation of reactive MgO cements. Cement and Concrete Research, 54, pp. 87-97. (doi: 10.1016/j.cemconres.2013.08.009)
Yi, Y.L., Liska, M., Unluer, C. and Al-Tabbaa, A. (2013) Initial investigation into the carbonation of MgO for soil stabilisation. In: 18th International Conference on Soil Mechanics and Geotechnical Engineering: Challenges and Innovations in Geotechnics, ICSMGE 2013, Paris Convention Centre Paris, France, 2-6 Sept 2013,
Yi, Y., Liska, M., Akinyugha, A., Unluer, C. and Al-Tabbaa, A. (2013) Preliminary laboratory-scale model auger installation and testing of carbonated soil-MgO columns. Geotechnical Testing Journal, 36(3), pp. 384-393. (doi: 10.1520/GTJ20120052)
Yi, Y., Liska, M., Unluer, C. and Al-Tabbaa, A. (2013) Carbonating magnesia for soil stabilization. Canadian Geotechnical Journal, 50(8), pp. 899-905. (doi: 10.1139/cgj-2012-0364)
Wielewski, E. , Birkbeck, A. and Thomson, R. (2013) Ballistic resistance of spaced multi-layer plate structures: experiments on fibre reinforced plastic targets and an analytical framework for calculating the ballistic limit. Materials and Design, 50, pp. 737-741. (doi:10.1016/j.matdes.2013.03.006)
Wielewski, E. , Appleby-Thomas, G.J., Hazell, P.J. and Hameed, A. (2013) An experimental investigation into the micro-mechanics of spall initiation and propagation in Ti–6Al–4V during shock loading. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 578, pp. 331-339. (doi:10.1016/j.msea.2013.04.055)
2012
Bejarano, F., Feeney, A. and Lucas, M. (2012) Vibration Characterisation of Cymbal Transducers for Power Ultrasonic Applications. In: Modern Practice in Stress and Vibration Analysis 2012 (MPSVA 2012), Glasgow, Scotland, 29-31 Aug 2012,(doi:10.1088/1742-6596/382/1/012063)
Bejarano, F., Feeney, A. and Lucas, M. (2012) Optimisation of a Cymbal Transducer for its use as Driver of a High-Power Ultrasonic Cutting Device for Bone Surgery. In: 41st UIA Symposium, San Francisco, CA, USA, 16-18 Apr 2012,
Feeney, A., Bejarano, F. and Lucas, M. (2012) Dynamics Characterisation of Cymbal Transducers for Power Ultrasonics Applications. In: 41st UIA Symposium, San Francisco, CA, USA, 16-18 Apr 2012
Mostafavi, S., Fotouhi, M. , Motasemi, A., Ahmadi, M. and Sindi, C. T. (2012) Acoustic emission methodology to evaluate the fracture toughness in heat treated AISI D2 tool steel. Journal of Materials Engineering and Performance, 21(10), pp. 2106-2116.(doi: 10.1007/s11665-011-0119-6)
Fotouhi, M. , Heidary, H., Ahmadi, M. and Pashmforoush, F. (2012) Characterization of composite materials damage under quasi-static three-point bending test using wavelet and fuzzy C-means clustering. Journal of Composite Materials, 46(15), pp. 1795-1808. (doi: 10.1177/0021998311425968)
Pashmforoush, F., Fotouhi, M. and Ahmadi, M. (2012) Damage characterization of glass/epoxy composite under three-point bending test using acoustic emission technique. Journal of Materials Engineering and Performance, 21(7), pp. 1380-1390. (doi: 10.1007/s11665-011-0013-2)
Pashmforoush, F., Fotouhi, M. and Ahmadi, M. (2012) Acoustic emission-based damage classification of glass/polyester composites using harmony search k-means algorithm. Journal of Reinforced Plastics and Composites, 31(10), pp. 671-680. (doi: 10.1177/0731684412442257)
Fotouhi, M. , Fotouhi, H., Belalpour, P. and Ahmadi, M. (2012) Monitoring of Initiation and Growth of Delamination in Composite Materials Using Acoustic Emission and Energy Function. 6th Condition Monitoring and Fault Diagnosis Conference (CMFD2012), Tehran, Iran, 28-29 February 2012.
Fotouhi, M. , Fotouhi, S., Belalpour, P. and Ahmadi, M. (2012) Damage Characterization of Laminated Composites Under Quasi-Static 3-Pointbending Test Using Power Spectrum Analysis. 6th Condition Monitoring and Fault Diagnosis Conference (CMFD2012), Tehran, Iran, 28-29 February 2012.
Fotouhi, M. , Yousefi, J., Ahmadi, M. and Fotouhi, H. (2012) Monitoring the Initiation and Growth of Delamination in Composite Materials Using Acoustic Emission. 3rd International Conference On Composites:characterization, Fabrication And Application (CCFA), Tehran, Iran, 18-19 December 2012.
Grassl, P. , Grégoire, D., Rojas Solano, L. and Pijaudier-Cabot, G. (2012) Meso-scale modelling of the size effect on the fracture process zone of concrete. International Journal of Solids and Structures, 49(13), pp. 1818-1827. (doi: 10.1016/j.ijsolstr.2012.03.023)
Novak, J., Kaczmarczyk, L. , Grassl, P. , Zeman, J. and Pearce, C.J. (2012) A micromechanics-enhanced finite element formulation for modelling heterogeneous materials. Computer Methods in Applied Mechanics and Engineering, 201-4, 53 - 64. (doi: 10.1016/j.cma.2011.09.003)
Harrison, P. (2012) Normalisation of biaxial bias extension test results considering shear tension coupling. Composites Part A: Applied Science and Manufacturing, 43(9), pp. 1546-1554. (doi:10.1016/j.compositesa.2012.04.014)
Jebur, Q.H., Harrison, P., Guo, Z., Schubert, G., Ju, X. and Navez, V. (2012) Characterisation and modelling of a transversely isotropic melt-extruded LDPE closed cell foam under uniaxial compression. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 226(9), pp. 2168-2177. (doi:10.1177/0954406211431528)
Harrison, P., Abdiwi, F., Guo, Z., Potluri, P. and Yu, W.R. (2012) Characterising the shear–tension coupling and wrinkling behaviour of woven engineering fabrics. Composites Part A: Applied Science and Manufacturing, 43(6), pp. 903-914. (doi:10.1016/j.compositesa.2012.01.024)
Abdiwi, F., Harrison, P., Koyama, I., Yu, W.R., Long, A.C., Corriea, N. and Guo, Z. (2012) Characterising and modelling variability of tow orientation in engineering fabrics and textile composites. Composites Science and Technology, 72(9), pp. 1034-1041. (doi:10.1016/j.compscitech.2012.03.017)
Abdiwi, F., Harrison, P., Yu, W.R. and Guo, Z. (2012) Modelling the Shear-Tension Coupling of Engineering Fabrics. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Alsayednoor, J., Harrison, P. and Guo, Z. (2012) Effect of contact and boundary conditions on the large strain compression of random cellular structures. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Biglari, A., Harrison, P. and Guo, Z. (2012) Flexibility based beam element based on large increment method. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Biglari, A.F., Harrison, P., Guo, Z. and Bicanic, N. (2012) A 2D Euler-Bernoulli inelastic beam-column element for the large increment method. In: 20th UK Conference of the Association for Computational Mechanics, Manchester, UK, 27-28 Mar 2012
Guo, Z., Shi, X., Peng, X. and Harrison, P. (2012) A hyperelastic model for incompressible particle-reinforced neo-Hookean composite. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Harrison, P. (2012) Normalisation of biaxial bias-extension test results considering shear-tension coupling. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Harrison, P., Gomes, P., Correia, R., Abdiwi, F. and Yu, W.R. (2012) Press forming the double-dome benchmark geometry using a 0/90 uniaxial cross-ply advanced thermoplastic composite. In: ECCM 15 - 15th European Conference on Composite Materials, Venice, Italy, 24-28 Jun 2012
Jebur, Q.H., Harrison, P. and Guo, Z. (2012) Predicting the transversely isotropic behaviour of closed-cell foam subjected to compressive loading.In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Schubert, G., Harrison, P. and Guo, Z. (2012) Characterisation of the magneto-rheological effect of silicone rubber - iron particle composites under large strains. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Kumar, S. and Cocks, A.C.F. (2012) Sintering and mud cracking in EB-PVD thermal barrier coatings. Journal of the Mechanics and Physics of Solids, 60(4), pp. 723-749. (doi: 10.1016/j.jmps.2011.12.004)
Javili, A., McBride, A. and Steinmann, P. (2012) Numerical modelling of thermomechanical solids with mechanically energetic (generalised) Kapitza interfaces. Computational Materials Science, 65, pp. 542-551. (doi:10.1016/j.commatsci.2012.06.006)
McBride, A. , Mergheim, J., Javili, A., Steinmann, P. and Bargmann, S. (2012) Micro-to-macro transitions for heterogeneous material layers accounting for in-plane stretch. Journal of the Mechanics and Physics of Solids, 60(6), pp. 1221-1239. (doi:10.1016/j.jmps.2012.01.003)
Reddy, B. D. and McBride, A. (2012) Introduction to finite element analysis and recent developments. In: Patanaik, A. (ed.) Modeling and Simulation in Fibrous Materials: Techniques and Applications. Nova Science Publishers, New York: New York, United States, pp. 1-28. ISBN 9781621001164
Steinmann, P., McBride, A. T. , Bargmann, S. and Javili, A. (2012) A deformational and configurational framework for geometrically non-linear continuum thermomechanics coupled to diffusion.International Journal of Non-Linear Mechanics, 47(2), pp. 215-227. (doi:10.1016/j.ijnonlinmec.2011.05.009)
Javili, A., McBride, A. , Mergheim, J., Steinmann, P. and Schmidt, U. (2012) Micro-To-Macro Transitions for Continua with Surface Structure at the Microscale. In: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Darmstadt, Germany, 26-30 Mar 2012, pp. 23-26. (doi:10.1002/pamm.201210007)
Javili, A., McBride, A. , Steinmann, P. and Reddy, B.D. (2012) Relationships between the admissible range of surface material parameters and stability of linearly elastic bodies. Philosophical Magazine, 92(28-30), pp. 3540-3563. (doi:10.1080/14786435.2012.682175)
Riedlbauer, D., Mergheim, J., McBride, A. and Steinmann, P. (2012) Macroscopic Modelling of the Selective Beam Melting Process. In: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Darmstadt, Germany, 26-30 Mar 2012, pp. 381-382. (doi:10.1002/pamm.201210179)
Unluer, C. and Al-Tabbaa, A. (2012) Effect of Aggregate Size Distribution on the Carbonation of Reactive Magnesia Based Porous Blocks. 18th Annual International Sustainable Development Research Conference, Hull, UK, 24-26 Jun 2012.
Hazell, P.J., Appleby-Thomas, G.J., Wielewski, E. , Stennett, C. and Siviour, C. (2012) The influence of microstructure on the shock and spall behaviour of the magnesium alloy, Elektron 675. Acta Materialia, 60(17), pp. 6042-6050.(doi:10.1016/j.actamat.2012.07.041)
Wielewski, E. , Siviour, C. R. and Petrinic, N. (2012) On the correlation between macrozones and twinning in Ti–6Al–4V at very high strain rates. Scripta Materialia, 67(3), pp. 229-232. (doi:10.1016/j.scriptamat.2012.04.026)
Bejarano, F., Feeney, A. and Lucas, M. (2012) Optimisation of a Cymbal Transducer for its use as Driver of a High-Power Ultrasonic Cutting Device for Bone Surgery. In: 41st UIA Symposium, San Francisco, CA, USA, 16-18 Apr 2012,
Feeney, A., Bejarano, F. and Lucas, M. (2012) Dynamics Characterisation of Cymbal Transducers for Power Ultrasonics Applications. In: 41st UIA Symposium, San Francisco, CA, USA, 16-18 Apr 2012
Mostafavi, S., Fotouhi, M. , Motasemi, A., Ahmadi, M. and Sindi, C. T. (2012) Acoustic emission methodology to evaluate the fracture toughness in heat treated AISI D2 tool steel. Journal of Materials Engineering and Performance, 21(10), pp. 2106-2116.(doi: 10.1007/s11665-011-0119-6)
Fotouhi, M. , Heidary, H., Ahmadi, M. and Pashmforoush, F. (2012) Characterization of composite materials damage under quasi-static three-point bending test using wavelet and fuzzy C-means clustering. Journal of Composite Materials, 46(15), pp. 1795-1808. (doi: 10.1177/0021998311425968)
Pashmforoush, F., Fotouhi, M. and Ahmadi, M. (2012) Damage characterization of glass/epoxy composite under three-point bending test using acoustic emission technique. Journal of Materials Engineering and Performance, 21(7), pp. 1380-1390. (doi: 10.1007/s11665-011-0013-2)
Pashmforoush, F., Fotouhi, M. and Ahmadi, M. (2012) Acoustic emission-based damage classification of glass/polyester composites using harmony search k-means algorithm. Journal of Reinforced Plastics and Composites, 31(10), pp. 671-680. (doi: 10.1177/0731684412442257)
Fotouhi, M. , Fotouhi, H., Belalpour, P. and Ahmadi, M. (2012) Monitoring of Initiation and Growth of Delamination in Composite Materials Using Acoustic Emission and Energy Function. 6th Condition Monitoring and Fault Diagnosis Conference (CMFD2012), Tehran, Iran, 28-29 February 2012.
Fotouhi, M. , Fotouhi, S., Belalpour, P. and Ahmadi, M. (2012) Damage Characterization of Laminated Composites Under Quasi-Static 3-Pointbending Test Using Power Spectrum Analysis. 6th Condition Monitoring and Fault Diagnosis Conference (CMFD2012), Tehran, Iran, 28-29 February 2012.
Fotouhi, M. , Yousefi, J., Ahmadi, M. and Fotouhi, H. (2012) Monitoring the Initiation and Growth of Delamination in Composite Materials Using Acoustic Emission. 3rd International Conference On Composites:characterization, Fabrication And Application (CCFA), Tehran, Iran, 18-19 December 2012.
Grassl, P. , Grégoire, D., Rojas Solano, L. and Pijaudier-Cabot, G. (2012) Meso-scale modelling of the size effect on the fracture process zone of concrete. International Journal of Solids and Structures, 49(13), pp. 1818-1827. (doi: 10.1016/j.ijsolstr.2012.03.023)
Novak, J., Kaczmarczyk, L. , Grassl, P. , Zeman, J. and Pearce, C.J. (2012) A micromechanics-enhanced finite element formulation for modelling heterogeneous materials. Computer Methods in Applied Mechanics and Engineering, 201-4, 53 - 64. (doi: 10.1016/j.cma.2011.09.003)
Harrison, P. (2012) Normalisation of biaxial bias extension test results considering shear tension coupling. Composites Part A: Applied Science and Manufacturing, 43(9), pp. 1546-1554. (doi:10.1016/j.compositesa.2012.04.014)
Jebur, Q.H., Harrison, P., Guo, Z., Schubert, G., Ju, X. and Navez, V. (2012) Characterisation and modelling of a transversely isotropic melt-extruded LDPE closed cell foam under uniaxial compression. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 226(9), pp. 2168-2177. (doi:10.1177/0954406211431528)
Harrison, P., Abdiwi, F., Guo, Z., Potluri, P. and Yu, W.R. (2012) Characterising the shear–tension coupling and wrinkling behaviour of woven engineering fabrics. Composites Part A: Applied Science and Manufacturing, 43(6), pp. 903-914. (doi:10.1016/j.compositesa.2012.01.024)
Abdiwi, F., Harrison, P., Koyama, I., Yu, W.R., Long, A.C., Corriea, N. and Guo, Z. (2012) Characterising and modelling variability of tow orientation in engineering fabrics and textile composites. Composites Science and Technology, 72(9), pp. 1034-1041. (doi:10.1016/j.compscitech.2012.03.017)
Abdiwi, F., Harrison, P., Yu, W.R. and Guo, Z. (2012) Modelling the Shear-Tension Coupling of Engineering Fabrics. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Alsayednoor, J., Harrison, P. and Guo, Z. (2012) Effect of contact and boundary conditions on the large strain compression of random cellular structures. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Biglari, A., Harrison, P. and Guo, Z. (2012) Flexibility based beam element based on large increment method. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Biglari, A.F., Harrison, P., Guo, Z. and Bicanic, N. (2012) A 2D Euler-Bernoulli inelastic beam-column element for the large increment method. In: 20th UK Conference of the Association for Computational Mechanics, Manchester, UK, 27-28 Mar 2012
Guo, Z., Shi, X., Peng, X. and Harrison, P. (2012) A hyperelastic model for incompressible particle-reinforced neo-Hookean composite. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Harrison, P. (2012) Normalisation of biaxial bias-extension test results considering shear-tension coupling. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Harrison, P., Gomes, P., Correia, R., Abdiwi, F. and Yu, W.R. (2012) Press forming the double-dome benchmark geometry using a 0/90 uniaxial cross-ply advanced thermoplastic composite. In: ECCM 15 - 15th European Conference on Composite Materials, Venice, Italy, 24-28 Jun 2012
Jebur, Q.H., Harrison, P. and Guo, Z. (2012) Predicting the transversely isotropic behaviour of closed-cell foam subjected to compressive loading.In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Schubert, G., Harrison, P. and Guo, Z. (2012) Characterisation of the magneto-rheological effect of silicone rubber - iron particle composites under large strains. In: 8th European Solid Mechanics Conference (ESCM2012), Graz, Austria, 9-13 July 2012
Kumar, S. and Cocks, A.C.F. (2012) Sintering and mud cracking in EB-PVD thermal barrier coatings. Journal of the Mechanics and Physics of Solids, 60(4), pp. 723-749. (doi: 10.1016/j.jmps.2011.12.004)
Javili, A., McBride, A. and Steinmann, P. (2012) Numerical modelling of thermomechanical solids with mechanically energetic (generalised) Kapitza interfaces. Computational Materials Science, 65, pp. 542-551. (doi:10.1016/j.commatsci.2012.06.006)
McBride, A. , Mergheim, J., Javili, A., Steinmann, P. and Bargmann, S. (2012) Micro-to-macro transitions for heterogeneous material layers accounting for in-plane stretch. Journal of the Mechanics and Physics of Solids, 60(6), pp. 1221-1239. (doi:10.1016/j.jmps.2012.01.003)
Reddy, B. D. and McBride, A. (2012) Introduction to finite element analysis and recent developments. In: Patanaik, A. (ed.) Modeling and Simulation in Fibrous Materials: Techniques and Applications. Nova Science Publishers, New York: New York, United States, pp. 1-28. ISBN 9781621001164
Steinmann, P., McBride, A. T. , Bargmann, S. and Javili, A. (2012) A deformational and configurational framework for geometrically non-linear continuum thermomechanics coupled to diffusion.International Journal of Non-Linear Mechanics, 47(2), pp. 215-227. (doi:10.1016/j.ijnonlinmec.2011.05.009)
Javili, A., McBride, A. , Mergheim, J., Steinmann, P. and Schmidt, U. (2012) Micro-To-Macro Transitions for Continua with Surface Structure at the Microscale. In: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Darmstadt, Germany, 26-30 Mar 2012, pp. 23-26. (doi:10.1002/pamm.201210007)
Javili, A., McBride, A. , Steinmann, P. and Reddy, B.D. (2012) Relationships between the admissible range of surface material parameters and stability of linearly elastic bodies. Philosophical Magazine, 92(28-30), pp. 3540-3563. (doi:10.1080/14786435.2012.682175)
Riedlbauer, D., Mergheim, J., McBride, A. and Steinmann, P. (2012) Macroscopic Modelling of the Selective Beam Melting Process. In: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Darmstadt, Germany, 26-30 Mar 2012, pp. 381-382. (doi:10.1002/pamm.201210179)
Unluer, C. and Al-Tabbaa, A. (2012) Effect of Aggregate Size Distribution on the Carbonation of Reactive Magnesia Based Porous Blocks. 18th Annual International Sustainable Development Research Conference, Hull, UK, 24-26 Jun 2012.
Hazell, P.J., Appleby-Thomas, G.J., Wielewski, E. , Stennett, C. and Siviour, C. (2012) The influence of microstructure on the shock and spall behaviour of the magnesium alloy, Elektron 675. Acta Materialia, 60(17), pp. 6042-6050.(doi:10.1016/j.actamat.2012.07.041)
Wielewski, E. , Siviour, C. R. and Petrinic, N. (2012) On the correlation between macrozones and twinning in Ti–6Al–4V at very high strain rates. Scripta Materialia, 67(3), pp. 229-232. (doi:10.1016/j.scriptamat.2012.04.026)
2011
Sinn, T., McRobb, M. , Wujek, A., Skogby, J., Zhang, M., Vasile, M., Tibert, G., Weppler, J., Feeney, A. and Russell, J. (2011) REXUS 12 Suaineadh experiment: deployment of a web in microgravity conditions using centrifugal forces. In: 62nd International Astronautical Congress, Cape Town, South Africa, 3-7 Oct 2011, IAC-11.
Fotouhi, M. , Pashmforoush, F., Ahmadi, M. and Refahi Oskouei, A. (2011) Monitoring the initiation and growth of delamination in composite materials using acoustic emission under quasi-static three-point bending test. Journal of Reinforced Plastics and Composites, 30(17), pp. 1481-1493. (doi: 10.1177/0731684411415140)
Fotouhi, M. and Ahmadi, M. (2011) Detection of Damage Mechanisms in Delamination of Composite Materials Using Wavelet Analysis. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. and Ahmadi, M. (2011) Monitoring of Initiation and Growth of Delamination Using Acoustic Emission and Energy Function. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. and Ahmadi, M. (2011) Online Monitoring of Glass/Polyester Composites During Mode I Delamination Test Using Acoustic Emission Method. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. , Heidary, H., Pashmforoush, F. and Ahmadi, M. (2011) Composite Materials Damage Characterization Under Quasi-Static 3-Point Bending Test Using Fuzzy C-Means Clustering. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), Singapore, 26-28 February 2011,
Zeinali, M., Fotouhi, M. and Ahmadi, M. (2011) Study of Effect of Micro-Structure on Developing of Residual Stresses for Med During Welding of Carbon Steels. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Grassl, P. and Davies, T. (2011) Lattice modelling of bond and corrosion-induced cracking in reinforced concrete. Cement and Concrete Composites, 33(9), pp. 918-924. (doi: 10.1016/j.cemconcomp.2011.05.005)
Abdiwi, F., Harrison, P., Guo, Z., Potluri, P. and Yu, W.R. (2011) Measuring the shear-tension coupling of engineering fabrics. AIP Conference Proceedings, 1353, pp. 889-894. (doi:10.1063/1.3589628)
Abdiwi, F., Harrison, P., Koyama, I., Yu, W.R., Long, A.C. and Guo, Z. (2011) Modelling Variability of Tow Orientation for Woven Textile Composites.In: 18th International Conference of Composite Materials, Jeju Island, Korea, 21-26 August 2011
Carassiti, L., Jones, A., Harrison, P., Dobson, P.S., Kingman, S., MacLaren, I. and Gregory, D.H. (2011) Ultra-rapid, sustainable and selective synthesis of silicon carbide powders and nanomaterials via microwave heating. Energy and Environmental Science, 4, pp. 1503-1510.(doi:10.1039/C0EE00799D)
Harrison, P., Yu, W.-R. and Long, A.C. (2011) Rate dependent modelling of the forming behaviour of viscous textile composites. Composites Part A: Applied Science and Manufacturing, 42(11), pp. 1719-1726. (doi:10.1016/j.compositesa.2011.07.026)
Jebur, Q.F., Harrison, P., Guo, Z., Schubert, G. and Navez, V. (2011) Characterisation and Modelling of a Melt-Extruded LDPE Closed Cell Foam. In: International Conference on Advances in Experimental Mechanics: Intergrating Simulation and Experimentation for Validation, Edinburgh, UK, 7 - 9 September 2011
Park, H., Yu, W.R., Harrison, P. and Guo, Z. (2011) Analysis of the Mechanical Behaviour of Magneto Shape Memory Polyments under Magnetic Field. In: 18th International Conference of Composite Materials, Jeju Island, Korea, 21-26 August 2011
Shi, X., Guo, Z., Peng, X. and Harrison, P. (2011) Numerical Homogenisation of Particle-Reinforced Neo-Hookean Composite. In: 18th International Conference of Composite Materials, Jeju Island, Korea, 21-26 August 2011
Li, P., Petrinic, N. and Siviour, C.R. (2011) Quantification of impact energy dissipation capacity in metallic thin-walled hollow sphere foams using high speed photography. Journal of Applied Physics, 110(8), 083516. (doi:10.1063/1.3647769)
McBride, A.T. , Javili, A., Steinmann, P. and Bargmann, S. (2011) Geometrically nonlinear continuum thermomechanics with surface energies coupled to diffusion. Journal of the Mechanics and Physics of Solids, 59(10), pp. 2116-2133. (doi:10.1016/j.jmps.2011.06.002)
Bargmann, S., McBride, A. and Steinmann, P. (2011) Models of solvent penetration in glassy polymers with an emphasis on case II diffusion: a comparative review. Applied Mechanics Reviews, 64(1), 010803. (doi:10.1115/1.4003955)
McBride, A. , Bargmann, S. and Steinmann, P. (2011) Geometrically Nonlinear Continuum Thermomechanics Coupled to Diffusion: A Framework for Case II Diffusion. In: 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (PAMM), Graz, Austria, 18-21 Apr 2011, p. 484. (doi:10.1002/pamm.201110233)
McBride, A. T. , Bargmann, S. and Steinmann, P. (2011) Geometrically nonlinear continuum thermomechanics coupled to diffusion: a framework for case II diffusion. In: Markert, B. (ed.)Advances in Extended and Multifield Theories for Continua. Series: Lecture Notes in Applied and Computational Mechanics (59). Springer Berlin Heidelberg, pp. 89-107. ISBN 9783642227370 (doi:10.1007/978-3-642-22738-7_5)
Mulvihill, D.M. , Kartal, M.E., Nowell, D. and Hills, D.A. (2011) An elastic–plastic asperity interaction model for sliding friction. Tribology International, 44(12), pp. 1679-1694. (doi: 10.1016/j.triboint.2011.06.018)
Kartal, M.E., Mulvihill, D.M. , Nowell, D. and Hills, D.A. (2011) Measurements of pressure and area dependent tangential contact stiffness between rough surfaces using digital image correlation. Tribology International, 44(10), pp. 1188-1198. (doi: 10.1016/j.triboint.2011.05.025)
Mulvihill, D.M. , O’Driscoll, C., Stanley, W. and Little, E.G. (2011) A comparison of various patterns of three-dimensional strain rosettes. Strain, 47(s1), e447-e456. (doi: 10.1111/j.1475-1305.2009.00634.x)
Mulvihill, D.M. , Kartal, M.E., Olver, A.V., Nowell, D. and Hills, D.A. (2011) Investigation of non-Coulomb friction behaviour in reciprocating sliding. Wear, 271(5-6), pp. 802-816. (doi: 10.1016/j.wear.2011.03.014)
Mulvihill, D. , Kartal, M.E. and Nowell, D. (2011) An Asperity Interaction Model for Friction. 3rd European Conference on Tribology (ECOTRIB), Vienna, Austria, 7-9 June 2011.
Kartal, M.E., Mulvihill, D.M. , Nowell, D. and Hills, D.A. (2011) Determination of the frictional properties of titanium and nickel alloys using the digital image correlation method. Experimental Mechanics, 51(3), pp. 359-371. (doi: 10.1007/s11340-010-9366-y)
Kartal, M. E., Mulvihill, D. M. , Nowell, D. and Hills, D. A. (2011) Measurement of tangential contact stiffness in frictional contacts: the effect of normal pressure. Applied Mechanics and Materials, 70, pp. 321-326. (doi: 10.4028/www.scientific.net/AMM.70.321)
Mulvihill, D. M. , Kartal, M. E., Nowell, D. and Hills, D. A. (2011) Investigation of the friction variation with sliding which is commonly observed in individual fretting test cycles. Applied Mechanics and Materials, 70, pp. 213-218. (doi: 10.4028/www.scientific.net/AMM.70.213)
Unluer, C. and Al-Tabbaa, A. (2011) Green Construction with Carbonating Reactive Magnesia Blocks: Effect of Cement and Water Contents. International Conference on Future Concrete, Dubai, UAE, December 2011.
Fotouhi, M. , Pashmforoush, F., Ahmadi, M. and Refahi Oskouei, A. (2011) Monitoring the initiation and growth of delamination in composite materials using acoustic emission under quasi-static three-point bending test. Journal of Reinforced Plastics and Composites, 30(17), pp. 1481-1493. (doi: 10.1177/0731684411415140)
Fotouhi, M. and Ahmadi, M. (2011) Detection of Damage Mechanisms in Delamination of Composite Materials Using Wavelet Analysis. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. and Ahmadi, M. (2011) Monitoring of Initiation and Growth of Delamination Using Acoustic Emission and Energy Function. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. and Ahmadi, M. (2011) Online Monitoring of Glass/Polyester Composites During Mode I Delamination Test Using Acoustic Emission Method. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. , Heidary, H., Pashmforoush, F. and Ahmadi, M. (2011) Composite Materials Damage Characterization Under Quasi-Static 3-Point Bending Test Using Fuzzy C-Means Clustering. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), Singapore, 26-28 February 2011,
Zeinali, M., Fotouhi, M. and Ahmadi, M. (2011) Study of Effect of Micro-Structure on Developing of Residual Stresses for Med During Welding of Carbon Steels. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Grassl, P. and Davies, T. (2011) Lattice modelling of bond and corrosion-induced cracking in reinforced concrete. Cement and Concrete Composites, 33(9), pp. 918-924. (doi: 10.1016/j.cemconcomp.2011.05.005)
Abdiwi, F., Harrison, P., Guo, Z., Potluri, P. and Yu, W.R. (2011) Measuring the shear-tension coupling of engineering fabrics. AIP Conference Proceedings, 1353, pp. 889-894. (doi:10.1063/1.3589628)
Abdiwi, F., Harrison, P., Koyama, I., Yu, W.R., Long, A.C. and Guo, Z. (2011) Modelling Variability of Tow Orientation for Woven Textile Composites.In: 18th International Conference of Composite Materials, Jeju Island, Korea, 21-26 August 2011
Carassiti, L., Jones, A., Harrison, P., Dobson, P.S., Kingman, S., MacLaren, I. and Gregory, D.H. (2011) Ultra-rapid, sustainable and selective synthesis of silicon carbide powders and nanomaterials via microwave heating. Energy and Environmental Science, 4, pp. 1503-1510.(doi:10.1039/C0EE00799D)
Harrison, P., Yu, W.-R. and Long, A.C. (2011) Rate dependent modelling of the forming behaviour of viscous textile composites. Composites Part A: Applied Science and Manufacturing, 42(11), pp. 1719-1726. (doi:10.1016/j.compositesa.2011.07.026)
Jebur, Q.F., Harrison, P., Guo, Z., Schubert, G. and Navez, V. (2011) Characterisation and Modelling of a Melt-Extruded LDPE Closed Cell Foam. In: International Conference on Advances in Experimental Mechanics: Intergrating Simulation and Experimentation for Validation, Edinburgh, UK, 7 - 9 September 2011
Park, H., Yu, W.R., Harrison, P. and Guo, Z. (2011) Analysis of the Mechanical Behaviour of Magneto Shape Memory Polyments under Magnetic Field. In: 18th International Conference of Composite Materials, Jeju Island, Korea, 21-26 August 2011
Shi, X., Guo, Z., Peng, X. and Harrison, P. (2011) Numerical Homogenisation of Particle-Reinforced Neo-Hookean Composite. In: 18th International Conference of Composite Materials, Jeju Island, Korea, 21-26 August 2011
Li, P., Petrinic, N. and Siviour, C.R. (2011) Quantification of impact energy dissipation capacity in metallic thin-walled hollow sphere foams using high speed photography. Journal of Applied Physics, 110(8), 083516. (doi:10.1063/1.3647769)
McBride, A.T. , Javili, A., Steinmann, P. and Bargmann, S. (2011) Geometrically nonlinear continuum thermomechanics with surface energies coupled to diffusion. Journal of the Mechanics and Physics of Solids, 59(10), pp. 2116-2133. (doi:10.1016/j.jmps.2011.06.002)
Bargmann, S., McBride, A. and Steinmann, P. (2011) Models of solvent penetration in glassy polymers with an emphasis on case II diffusion: a comparative review. Applied Mechanics Reviews, 64(1), 010803. (doi:10.1115/1.4003955)
McBride, A. , Bargmann, S. and Steinmann, P. (2011) Geometrically Nonlinear Continuum Thermomechanics Coupled to Diffusion: A Framework for Case II Diffusion. In: 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (PAMM), Graz, Austria, 18-21 Apr 2011, p. 484. (doi:10.1002/pamm.201110233)
McBride, A. T. , Bargmann, S. and Steinmann, P. (2011) Geometrically nonlinear continuum thermomechanics coupled to diffusion: a framework for case II diffusion. In: Markert, B. (ed.)Advances in Extended and Multifield Theories for Continua. Series: Lecture Notes in Applied and Computational Mechanics (59). Springer Berlin Heidelberg, pp. 89-107. ISBN 9783642227370 (doi:10.1007/978-3-642-22738-7_5)
Mulvihill, D.M. , Kartal, M.E., Nowell, D. and Hills, D.A. (2011) An elastic–plastic asperity interaction model for sliding friction. Tribology International, 44(12), pp. 1679-1694. (doi: 10.1016/j.triboint.2011.06.018)
Kartal, M.E., Mulvihill, D.M. , Nowell, D. and Hills, D.A. (2011) Measurements of pressure and area dependent tangential contact stiffness between rough surfaces using digital image correlation. Tribology International, 44(10), pp. 1188-1198. (doi: 10.1016/j.triboint.2011.05.025)
Mulvihill, D.M. , O’Driscoll, C., Stanley, W. and Little, E.G. (2011) A comparison of various patterns of three-dimensional strain rosettes. Strain, 47(s1), e447-e456. (doi: 10.1111/j.1475-1305.2009.00634.x)
Mulvihill, D.M. , Kartal, M.E., Olver, A.V., Nowell, D. and Hills, D.A. (2011) Investigation of non-Coulomb friction behaviour in reciprocating sliding. Wear, 271(5-6), pp. 802-816. (doi: 10.1016/j.wear.2011.03.014)
Mulvihill, D. , Kartal, M.E. and Nowell, D. (2011) An Asperity Interaction Model for Friction. 3rd European Conference on Tribology (ECOTRIB), Vienna, Austria, 7-9 June 2011.
Kartal, M.E., Mulvihill, D.M. , Nowell, D. and Hills, D.A. (2011) Determination of the frictional properties of titanium and nickel alloys using the digital image correlation method. Experimental Mechanics, 51(3), pp. 359-371. (doi: 10.1007/s11340-010-9366-y)
Kartal, M. E., Mulvihill, D. M. , Nowell, D. and Hills, D. A. (2011) Measurement of tangential contact stiffness in frictional contacts: the effect of normal pressure. Applied Mechanics and Materials, 70, pp. 321-326. (doi: 10.4028/www.scientific.net/AMM.70.321)
Mulvihill, D. M. , Kartal, M. E., Nowell, D. and Hills, D. A. (2011) Investigation of the friction variation with sliding which is commonly observed in individual fretting test cycles. Applied Mechanics and Materials, 70, pp. 213-218. (doi: 10.4028/www.scientific.net/AMM.70.213)
Unluer, C. and Al-Tabbaa, A. (2011) Green Construction with Carbonating Reactive Magnesia Blocks: Effect of Cement and Water Contents. International Conference on Future Concrete, Dubai, UAE, December 2011.
2010
Fotouhi, M. , Heidary, H., Ahmadi, M. and Shams, S. (2010) Wavelet-based Acoustic Emission Monitoring of Composite Materials Damage Under Quasi-static 3-point Bending Test. In: 2nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2), Kish, Iran, 27-30 Dec 2010,
Fotouhi, M. , Rahimi, A., Shams, S. and Rezaei, M. (2010) Feasibility Study of Using Flexible Manufacturing Systems in Car Industry. In: 11th Iranian Conference on Manufacturing Engineering (ICME 2010), Tabriz, Iran, 19th October 2010,
Grassl, P. and Davies, T. (2010) On a three-dimensional lattice approach for modelling corrosion induced cracking and its influence on bond between reinforcement and concrete. In: 7th International Conference on Fracture Mechanics of Concrete and Concrete Structures, Jeju, South Korea, 23-27 May 2010, pp. 487-492.
Grassl, P. and Jirásek, M. (2010) Meso-scale approach to modelling the fracture process zone of concrete subjected to uniaxial tension. International Journal of Solids and Structures, 47(7-8), pp. 957-968. (doi: 10.1016/j.ijsolstr.2009.12.010)
Grassl, P. and Pearce, C. (2010) Mesoscale approach to modeling concrete subjected to thermomechanical loading. Journal of Engineering Mechanics, 136(3), pp. 322-328. (doi: 10.1061/(ASCE)0733-9399(2010)136:3(322))
Grassl, P. , Wong, H.S. and Buenfeld, N.R. (2010) Influence of aggregate size and volume fraction on shrinkage induced micro-cracking of concrete and mortar. Cement and Concrete Research, 40(1), pp. 85-93. (doi: 10.1016/j.cemconres.2009.09.012)
Grassl, P. , Wong, H.S. and Buenfeld, N. (2010) Influence of entrained air and aggregates on shrinkage induced micro-cracking of concrete. In: CONMOD'10 Symposium on Concrete Modelling, Lausanne, Switzerland, 22-25 June 2010,
Novak, J., Kaczmarczyk, L. , Grassl, P. and Pearce, C. (2010) Hybrid analysis of heterogeneous materials. In: IV European Conference on Computational Mechanics (ECCM-2010), Palais des Congres, Paris, France, 16-21 May 2010,
Novak, J., Kaczmarczyk, L. , Grassl, P. and Pearce, C. (2010) Hybrid computational modelling of heterogenous materials. In: 10th International Conference on Computational Structures Technology, Valencia, Spain, 14-17 September 2010,
Alsayednoor, J., Harrison, P. and Guo, Z. (2010) Effect of Rotational Constraints on 2D Beam-Based RVE for Foam. In: 4th International Conference on Computational Mechanics, China, 19 - 21 November
Peng, X.Q., Guo, Z.Y., Rehman, Z.-U. and Harrison, P. (2010) A simple anisotropic fiber reinforced hyperelastic constitutive model for woven composite fabrics. International Journal of Material Forming, 3(Sup. 1), pp. 723-726. (doi:10.1007/s12289-010-0872-3)
Harrison, P. (2010) Modelling the deformability of non-crimp fabrics. In: Lomov, S. (ed.) Non-crimp fabric composites Manufacturing, properties and applications. Woodside Publishing: Cambridge. ISBN 978 1 84569 762 4
Harrison, P., Thije, R.T., Akkerman, R. and Long, A.C. (2010) Characterising and modelling tool-ply friction of viscous textile composites. World Journal of Engineering, 7(1), pp. 5-22.
Nowell, D., Kartal, M.E., Mulvihill, D. M. and Hills, D.A. (2010) A Simple Model for the Prediction of Tangential Contact Stiffness in Frictional Contact. Fourth European Conference on Computational Mechanics, Paris, France, 16-21 May 2010.
Wielewski, E. , Arthington, M.R., Siviour, C.R., Carter, S., Hofmann, F., Korsunsky, A.M. and Petrinic, N. (2010) A method for the in situ measurement of evolving elliptical cross-sections in initially cylindrical Taylor impact specimens. Journal of Strain Analysis for Engineering Design, 45(6), pp. 429-437. (doi:10.1243/03093247JSA639)
Fotouhi, M. , Rahimi, A., Shams, S. and Rezaei, M. (2010) Feasibility Study of Using Flexible Manufacturing Systems in Car Industry. In: 11th Iranian Conference on Manufacturing Engineering (ICME 2010), Tabriz, Iran, 19th October 2010,
Grassl, P. and Davies, T. (2010) On a three-dimensional lattice approach for modelling corrosion induced cracking and its influence on bond between reinforcement and concrete. In: 7th International Conference on Fracture Mechanics of Concrete and Concrete Structures, Jeju, South Korea, 23-27 May 2010, pp. 487-492.
Grassl, P. and Jirásek, M. (2010) Meso-scale approach to modelling the fracture process zone of concrete subjected to uniaxial tension. International Journal of Solids and Structures, 47(7-8), pp. 957-968. (doi: 10.1016/j.ijsolstr.2009.12.010)
Grassl, P. and Pearce, C. (2010) Mesoscale approach to modeling concrete subjected to thermomechanical loading. Journal of Engineering Mechanics, 136(3), pp. 322-328. (doi: 10.1061/(ASCE)0733-9399(2010)136:3(322))
Grassl, P. , Wong, H.S. and Buenfeld, N.R. (2010) Influence of aggregate size and volume fraction on shrinkage induced micro-cracking of concrete and mortar. Cement and Concrete Research, 40(1), pp. 85-93. (doi: 10.1016/j.cemconres.2009.09.012)
Grassl, P. , Wong, H.S. and Buenfeld, N. (2010) Influence of entrained air and aggregates on shrinkage induced micro-cracking of concrete. In: CONMOD'10 Symposium on Concrete Modelling, Lausanne, Switzerland, 22-25 June 2010,
Novak, J., Kaczmarczyk, L. , Grassl, P. and Pearce, C. (2010) Hybrid analysis of heterogeneous materials. In: IV European Conference on Computational Mechanics (ECCM-2010), Palais des Congres, Paris, France, 16-21 May 2010,
Novak, J., Kaczmarczyk, L. , Grassl, P. and Pearce, C. (2010) Hybrid computational modelling of heterogenous materials. In: 10th International Conference on Computational Structures Technology, Valencia, Spain, 14-17 September 2010,
Alsayednoor, J., Harrison, P. and Guo, Z. (2010) Effect of Rotational Constraints on 2D Beam-Based RVE for Foam. In: 4th International Conference on Computational Mechanics, China, 19 - 21 November
Peng, X.Q., Guo, Z.Y., Rehman, Z.-U. and Harrison, P. (2010) A simple anisotropic fiber reinforced hyperelastic constitutive model for woven composite fabrics. International Journal of Material Forming, 3(Sup. 1), pp. 723-726. (doi:10.1007/s12289-010-0872-3)
Harrison, P. (2010) Modelling the deformability of non-crimp fabrics. In: Lomov, S. (ed.) Non-crimp fabric composites Manufacturing, properties and applications. Woodside Publishing: Cambridge. ISBN 978 1 84569 762 4
Harrison, P., Thije, R.T., Akkerman, R. and Long, A.C. (2010) Characterising and modelling tool-ply friction of viscous textile composites. World Journal of Engineering, 7(1), pp. 5-22.
Nowell, D., Kartal, M.E., Mulvihill, D. M. and Hills, D.A. (2010) A Simple Model for the Prediction of Tangential Contact Stiffness in Frictional Contact. Fourth European Conference on Computational Mechanics, Paris, France, 16-21 May 2010.
Wielewski, E. , Arthington, M.R., Siviour, C.R., Carter, S., Hofmann, F., Korsunsky, A.M. and Petrinic, N. (2010) A method for the in situ measurement of evolving elliptical cross-sections in initially cylindrical Taylor impact specimens. Journal of Strain Analysis for Engineering Design, 45(6), pp. 429-437. (doi:10.1243/03093247JSA639)
2009
Grassl, P. (2009) A lattice approach to model flow in cracked concrete. Cement and Concrete Composites, 31(7), pp. 454-460. (doi: 10.1016/j.cemconcomp.2009.05.001)
Grassl, P. and Bazant, Z.P. (2009) Random lattice particle simulation of statistical size effect in quasibrittle structures failing at crack initiation. Journal of Engineering Mechanics, 135(2), pp. 85-92. (doi: 10.1061/(ASCE)0733-9399(2009)135:2(85))
Asahina, D., Landis, E.N., Grassl, P. and Bolander, J.E. (2009) Role of Phase Interfaces During Pre-Critical Cracking of Particulate Materials. In: International Conference on Particle-Based Methods, Barcelona, Spain, 25-27 Nov 2009,
Grassl, P. (2009) Damage-Plasticity Constitutive Model for the Failure of Concrete. In: 17th UK Conference on Comutational Mechanics (ACME-UK), Nottingham, UK, 6-8 April 2009,
Grassl, P. (2009) On a damage-plasticity approach to model concrete failure. Proceedings of the ICE: Engineering and Computational Mechanics, 162(4), pp. 221-231. (doi: 10.1680/eacm.2009.162.4.221)
Grassl, P. and Bolander, J.E. (2009) Three-dimensional lattice model for coupling of fracture and flow. In: Particles 2009: International Conference on Particle-Based Methods, Barcelona, Spain, 25-27 Nov 2009,
Grassl, P. , Wong, H.S. and Buenfeld, N.R. (2009) Influence of aggregate size and fraction on shrinkage induced micro-cracking of mortar and concrete. In: 12th International Conference on Fracture, Ottawa, Canada, 12-17 July 2009,
Katwan, O.M., Pearce, C. and Grassl, P. (2009) Discrete modelling of heat transfer. In: 17th UK Conference on Computational Mechanics (ACME-UK), Nottingham, UK, 6-8 April 2009,
Novak, J., Pearce, C. and Grassl, P. (2009) Parameter study on the microbond test based on finite element analysis. In: ICCM-17: 17th International Conference on Composite Materials, Edinburgh, UK, 27-31 July 2009, (Unpublished)
Novak, J., Pearce, C. , Grassl, P. , Yang, L. and Thomason, J. (2009) Three-dimensional nonlinear finite element analysis of the microbond test. In: 17th UK Conference on Computational Mechamics (ACME-UK), Nottingham, UK, 6-8 April 2009,
Saka, T., Bolander, J.E. and Grassl, P. (2009) Spalling potential of fire-exposed structural concrete: numerical simulation of the effects of polypropylene fibres. In: 1st International RILEM Workshop on Concrete Spalling Due to Fire Exposure, Leipzig, Germany, 3-5 September 2009,
Harrison, P. and Potluri, P. (2009) Shear tension coupling in biaxial bias extension tests. In: 17th International Conference on Composite Materials, Edinburgh, Scotland, 27th-31st July 2009
Harrison, P., ten Thije, R., Akkerman, R. and Long, A.C. (2009) Characterisation and modelling friction at the tool-ply interface for thermoplastic woven composites. In: NATO Advanced Research Workshop: Use of Textile Composites Technology for Safer Vehicles, Kiev, Ukraine, 18-21 May, 2009
Schubert, G., Guo, Z. and Harrison, P. (2009) A Simple 2D Hyperelastic Model for Textile Composites. In: NATO Advanced Research Workshop: Use of Textile Composites Technology for Safer Vehicles, Kiev, Ukraine, 18-21 May, 2009
McBride, A.T. and Reddy, B.D. (2009) A discontinuous Galerkin formulation of a model of gradient plasticity at finite strains. Computer Methods in Applied Mechanics and Engineering, 198(21-26), pp. 1805-1820. (doi:10.1016/j.cma.2008.12.034)
Grassl, P. and Bazant, Z.P. (2009) Random lattice particle simulation of statistical size effect in quasibrittle structures failing at crack initiation. Journal of Engineering Mechanics, 135(2), pp. 85-92. (doi: 10.1061/(ASCE)0733-9399(2009)135:2(85))
Asahina, D., Landis, E.N., Grassl, P. and Bolander, J.E. (2009) Role of Phase Interfaces During Pre-Critical Cracking of Particulate Materials. In: International Conference on Particle-Based Methods, Barcelona, Spain, 25-27 Nov 2009,
Grassl, P. (2009) Damage-Plasticity Constitutive Model for the Failure of Concrete. In: 17th UK Conference on Comutational Mechanics (ACME-UK), Nottingham, UK, 6-8 April 2009,
Grassl, P. (2009) On a damage-plasticity approach to model concrete failure. Proceedings of the ICE: Engineering and Computational Mechanics, 162(4), pp. 221-231. (doi: 10.1680/eacm.2009.162.4.221)
Grassl, P. and Bolander, J.E. (2009) Three-dimensional lattice model for coupling of fracture and flow. In: Particles 2009: International Conference on Particle-Based Methods, Barcelona, Spain, 25-27 Nov 2009,
Grassl, P. , Wong, H.S. and Buenfeld, N.R. (2009) Influence of aggregate size and fraction on shrinkage induced micro-cracking of mortar and concrete. In: 12th International Conference on Fracture, Ottawa, Canada, 12-17 July 2009,
Katwan, O.M., Pearce, C. and Grassl, P. (2009) Discrete modelling of heat transfer. In: 17th UK Conference on Computational Mechanics (ACME-UK), Nottingham, UK, 6-8 April 2009,
Novak, J., Pearce, C. and Grassl, P. (2009) Parameter study on the microbond test based on finite element analysis. In: ICCM-17: 17th International Conference on Composite Materials, Edinburgh, UK, 27-31 July 2009, (Unpublished)
Novak, J., Pearce, C. , Grassl, P. , Yang, L. and Thomason, J. (2009) Three-dimensional nonlinear finite element analysis of the microbond test. In: 17th UK Conference on Computational Mechamics (ACME-UK), Nottingham, UK, 6-8 April 2009,
Saka, T., Bolander, J.E. and Grassl, P. (2009) Spalling potential of fire-exposed structural concrete: numerical simulation of the effects of polypropylene fibres. In: 1st International RILEM Workshop on Concrete Spalling Due to Fire Exposure, Leipzig, Germany, 3-5 September 2009,
Harrison, P. and Potluri, P. (2009) Shear tension coupling in biaxial bias extension tests. In: 17th International Conference on Composite Materials, Edinburgh, Scotland, 27th-31st July 2009
Harrison, P., ten Thije, R., Akkerman, R. and Long, A.C. (2009) Characterisation and modelling friction at the tool-ply interface for thermoplastic woven composites. In: NATO Advanced Research Workshop: Use of Textile Composites Technology for Safer Vehicles, Kiev, Ukraine, 18-21 May, 2009
Schubert, G., Guo, Z. and Harrison, P. (2009) A Simple 2D Hyperelastic Model for Textile Composites. In: NATO Advanced Research Workshop: Use of Textile Composites Technology for Safer Vehicles, Kiev, Ukraine, 18-21 May, 2009
McBride, A.T. and Reddy, B.D. (2009) A discontinuous Galerkin formulation of a model of gradient plasticity at finite strains. Computer Methods in Applied Mechanics and Engineering, 198(21-26), pp. 1805-1820. (doi:10.1016/j.cma.2008.12.034)
2008
Grassl, P. and Rempling, R. (2008) A damage-plasticity interface approach to the meso-scale modelling of concrete subjected to cyclic compressive loading. Engineering Fracture Mechanics, 75, pp. 4804-4818. (doi: 10.1016/j.engfracmech.2008.06.005)
Jirasek, M. and Grassl, P. (2008) Evaluation of directional mesh bias in concrete fractur simulations using continuum damage models. Engineering Fracture Mechanics, 75, pp. 1921-1943. (doi: 10.1016/j.engfracmech.2007.11.010)
Rempling, R. and Grassl, P. (2008) A parametric study of the meso-scale modelling of concrete subjected to cyclic compression. Computers and Concrete, 5, pp. 359-373.
Harrison, P., Wiggers, J. and Long, A.C. (2008) Normalisation of shear test data for rate-independent compressible fabrics. Journal of Composite Materials, 42(22), pp. 2315-2344. (doi:10.1177/0021998308095367)
Kim, K.J., Yu, W.R. and Harrison, P. (2008) Optimum consolidation of self-reinforced polypropylene composite and its time dependent deformation behaviour. Composites Part A: Applied Science and Manufacturing, 39(10), pp. 1597-1605. (doi:10.1016/j.compositesa.2008.06.005)
Cao, J. et al. (2008) Characterization of mechanical behaviour of woven fabrics: experimental methods and benchmark results. Composites Part A: Applied Science and Manufacturing, 39(6), pp. 1037-1053. (doi:10.1016/j.compositesa.2008.02.016)
Harrison, P., Potluri, P., Bandara, K. and Long, A.C. (2008) A normalisation procedure for biaxial bias extension tests. International Journal of Material Forming, 1(Supp.), pp. 863-866. (doi:10.1007/s12289-008-0272-0)
Harrison, P., Potluri, P., Bandara, K. and Long, A.C. (2008) A Normalisation Procedure for Biaxial Bias Extension Tests. In: 11th International ESAFORM Conference on Materials Forming, Lyon, France, 23rd - 25th April 2008
Willems, A., Lomov, S.V., Verpoest, I., Vandepitte, D., Harrison, P. and Yu, W.R. (2008) Forming simulation of a thermoplastic commingled woven textile on a double dome. International Journal of Material Forming, 1(Supp.), pp. 965-968. (doi:10.1007/s12289-008-0218-6)
Ebobisse, F., McBride, A. and Reddy, B.D. (2008) On the mathematical formulations of a model of strain gradient plasticity. In: Reddy, B.D. (ed.) IUTAM Symposium on Theoretical, Modelling and Computational Aspects of Inelastic Media: Proceedings of the IUTAM Symposium held at Cape Town, South Africa, January 14-18, 2008. Series: IUTAM bookseries. Springer, pp. 117-128. ISBN 9789048180684
Powell, M.S., Govender, I. and McBride, A.T. (2008) Applying DEM outputs to the unified comminution model. Minerals Engineering, 21, pp. 744-750. (doi:10.1016/j.mineng.2008.06.010)
Reddy, B. D., Ebobisse, F. and McBride, A. (2008) Well-posedness of a model of strain gradient plasticity for plastically irrotational materials. International Journal of Plasticity, 24(1), pp. 55-73.(doi:10.1016/j.ijplas.2007.01.013)
McBride, A.T. and Reddy, B.D. (2008) Some aspects of a discontinuous Galerkin formulation for gradient plasticity at finite strains. In: IUTAM Symposium on Theoretical, Modelling and Computational Aspects of Inelastic Media, Cape Town, South Africa, 14-18 Jan 2008, pp. 237-247. ISBN 9781402090899 (doi:10.1007/978-1-4020-9090-5_22)
Jirasek, M. and Grassl, P. (2008) Evaluation of directional mesh bias in concrete fractur simulations using continuum damage models. Engineering Fracture Mechanics, 75, pp. 1921-1943. (doi: 10.1016/j.engfracmech.2007.11.010)
Rempling, R. and Grassl, P. (2008) A parametric study of the meso-scale modelling of concrete subjected to cyclic compression. Computers and Concrete, 5, pp. 359-373.
Harrison, P., Wiggers, J. and Long, A.C. (2008) Normalisation of shear test data for rate-independent compressible fabrics. Journal of Composite Materials, 42(22), pp. 2315-2344. (doi:10.1177/0021998308095367)
Kim, K.J., Yu, W.R. and Harrison, P. (2008) Optimum consolidation of self-reinforced polypropylene composite and its time dependent deformation behaviour. Composites Part A: Applied Science and Manufacturing, 39(10), pp. 1597-1605. (doi:10.1016/j.compositesa.2008.06.005)
Cao, J. et al. (2008) Characterization of mechanical behaviour of woven fabrics: experimental methods and benchmark results. Composites Part A: Applied Science and Manufacturing, 39(6), pp. 1037-1053. (doi:10.1016/j.compositesa.2008.02.016)
Harrison, P., Potluri, P., Bandara, K. and Long, A.C. (2008) A normalisation procedure for biaxial bias extension tests. International Journal of Material Forming, 1(Supp.), pp. 863-866. (doi:10.1007/s12289-008-0272-0)
Harrison, P., Potluri, P., Bandara, K. and Long, A.C. (2008) A Normalisation Procedure for Biaxial Bias Extension Tests. In: 11th International ESAFORM Conference on Materials Forming, Lyon, France, 23rd - 25th April 2008
Willems, A., Lomov, S.V., Verpoest, I., Vandepitte, D., Harrison, P. and Yu, W.R. (2008) Forming simulation of a thermoplastic commingled woven textile on a double dome. International Journal of Material Forming, 1(Supp.), pp. 965-968. (doi:10.1007/s12289-008-0218-6)
Ebobisse, F., McBride, A. and Reddy, B.D. (2008) On the mathematical formulations of a model of strain gradient plasticity. In: Reddy, B.D. (ed.) IUTAM Symposium on Theoretical, Modelling and Computational Aspects of Inelastic Media: Proceedings of the IUTAM Symposium held at Cape Town, South Africa, January 14-18, 2008. Series: IUTAM bookseries. Springer, pp. 117-128. ISBN 9789048180684
Powell, M.S., Govender, I. and McBride, A.T. (2008) Applying DEM outputs to the unified comminution model. Minerals Engineering, 21, pp. 744-750. (doi:10.1016/j.mineng.2008.06.010)
Reddy, B. D., Ebobisse, F. and McBride, A. (2008) Well-posedness of a model of strain gradient plasticity for plastically irrotational materials. International Journal of Plasticity, 24(1), pp. 55-73.(doi:10.1016/j.ijplas.2007.01.013)
McBride, A.T. and Reddy, B.D. (2008) Some aspects of a discontinuous Galerkin formulation for gradient plasticity at finite strains. In: IUTAM Symposium on Theoretical, Modelling and Computational Aspects of Inelastic Media, Cape Town, South Africa, 14-18 Jan 2008, pp. 237-247. ISBN 9781402090899 (doi:10.1007/978-1-4020-9090-5_22)
2007
Grassl, P. and Rempling, R. (2007) Influence of volumetric–deviatoric coupling on crack prediction in concrete fracture tests. Engineering Fracture Mechanics, 74(10), pp. 1683-1693. (doi: 10.1016/j.engfracmech.2006.08.028)
Bazant, Z. and Grassl, P. (2007) Size effect of cohesive delamination fracture triggered by sandwich skin wrinkling. In: 15th UK Conference of the Association of Computational Mechanics in Engineering (ACME), Glasgow, UK, 2-3 April, ISBN 978-1-905088-13-3 (CD Rom)
Grassl, P. (2007) Discrete approaches to modeling the fracture process zone of quasi brittle materials. In: International Conference on Computational Fracture and Failure of Materials and Structures, Nantes, France, 11-13 June,
Grassl, P. and Jirasek, M. (2007) Modelling of the fracture process zone of concrete. In: 15th UK Conference of the Association of Computational Mechanics in Engineering (ACME), Glasgow, UK, 2-3 April, ISBN 978-1-905088-13-3 (CD Rom)
Grassl, P. and Pearce, C. (2007) Discrete modelling of fracture and moisture transport in heterogeneous materials. In: MHM 2007:Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering, Prague, Czech Republic, 25-27 June, pp. 138-139. ISBN 978-80-01-03762-1
Jirasek, M. and Grassl, P. (2007) Boundary effects induced by nonlocal damage formulations. In: International Conference on Computational Fracture and Failure of Materials and Structures, Nantes, France, 11-13 June,
Pearce, C. and Grassl, P. (2007) On the modelling of temperature loading of concrete using a discrete approach. In: 15th UK Conference of the Association of Computational Mechanics in Engineering (ACME), Glasgow, UK, 2-3 April, ISBN 978-1-905088-13-3 (CD Rom)
Lin, H., Wang, J., Long, A.C., Clifford, M.J. and Harrison, P. (2007) Predictive modelling for optimization of textile composite forming. Composites Science and Technology, 67(15-16), pp. 3242-3252. (doi:10.1016/j.compscitech.2007.03.040)
Harrison, P., Lin, H., Ubbink, M., Akkerman, R., Van,De,Haar,, K. and Long, A. (2007) Characterising and modelling tool-ply friction of viscous textile composites. In: 16th Int. Conf. on Composite Materials, Kyoto, Japan
Harrison, P., Wiggers, J. and Long, A.C. (2007) Normalisation of shear test data for rate-independent compressible fabrics. In: 10th ESAFORM Conference on Materials Forming, Zaragosa, Spain, 18-20 April 2007, pp. 1011-1016. ISBN 9780735404144 (doi:10.1063/1.2729646)
Lin, H., Long, A., Clifford, M., Wang, J. and Harrison, P. (2007) Predictive modelling of FE forming to determine optimum processing conditions. In: 10th Int. ESAFORM Conference on Materials Forming, Zaragoza, Spain, pp. 1092-1097.
Lin, H., Long, A., Clifford, M., Wang, J. and Harrison, P. (2007) Predictive FE modelling of prepreg forming to determine optimum processing conditions. In: 10th ESAFORM Conference on Materials Forming, Zaragosa, Spain, 18-20 April 2007, pp. 1092-1097. ISBN 9780735404144(doi:10.1063/1.2729660)
Djoko, J. K., Ebobisse, F., McBride, A. T. and Reddy, B. D. (2007) A discontinuous Galerkin formulation for classical and gradient plasticity - Part 2: Algorithms and numerical analysis. Computer Methods in Applied Mechanics and Engineering, 196(1-4), pp. 1-21. (doi:10.1016/j.cma.2007.06.027)
Djoko, J. K., Ebobisse, F., McBride, A. and Reddy, B. D. (2007) A discontinuous Galerkin formulation for classical and gradient plasticity. Part 1: Formulation and analysis. Computer Methods in Applied Mechanics and Engineering, 197(37-40), pp. 3881-3897. (doi:10.1016/j.cma.2006.10.045)
Bazant, Z. and Grassl, P. (2007) Size effect of cohesive delamination fracture triggered by sandwich skin wrinkling. In: 15th UK Conference of the Association of Computational Mechanics in Engineering (ACME), Glasgow, UK, 2-3 April, ISBN 978-1-905088-13-3 (CD Rom)
Grassl, P. (2007) Discrete approaches to modeling the fracture process zone of quasi brittle materials. In: International Conference on Computational Fracture and Failure of Materials and Structures, Nantes, France, 11-13 June,
Grassl, P. and Jirasek, M. (2007) Modelling of the fracture process zone of concrete. In: 15th UK Conference of the Association of Computational Mechanics in Engineering (ACME), Glasgow, UK, 2-3 April, ISBN 978-1-905088-13-3 (CD Rom)
Grassl, P. and Pearce, C. (2007) Discrete modelling of fracture and moisture transport in heterogeneous materials. In: MHM 2007:Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering, Prague, Czech Republic, 25-27 June, pp. 138-139. ISBN 978-80-01-03762-1
Jirasek, M. and Grassl, P. (2007) Boundary effects induced by nonlocal damage formulations. In: International Conference on Computational Fracture and Failure of Materials and Structures, Nantes, France, 11-13 June,
Pearce, C. and Grassl, P. (2007) On the modelling of temperature loading of concrete using a discrete approach. In: 15th UK Conference of the Association of Computational Mechanics in Engineering (ACME), Glasgow, UK, 2-3 April, ISBN 978-1-905088-13-3 (CD Rom)
Lin, H., Wang, J., Long, A.C., Clifford, M.J. and Harrison, P. (2007) Predictive modelling for optimization of textile composite forming. Composites Science and Technology, 67(15-16), pp. 3242-3252. (doi:10.1016/j.compscitech.2007.03.040)
Harrison, P., Lin, H., Ubbink, M., Akkerman, R., Van,De,Haar,, K. and Long, A. (2007) Characterising and modelling tool-ply friction of viscous textile composites. In: 16th Int. Conf. on Composite Materials, Kyoto, Japan
Harrison, P., Wiggers, J. and Long, A.C. (2007) Normalisation of shear test data for rate-independent compressible fabrics. In: 10th ESAFORM Conference on Materials Forming, Zaragosa, Spain, 18-20 April 2007, pp. 1011-1016. ISBN 9780735404144 (doi:10.1063/1.2729646)
Lin, H., Long, A., Clifford, M., Wang, J. and Harrison, P. (2007) Predictive modelling of FE forming to determine optimum processing conditions. In: 10th Int. ESAFORM Conference on Materials Forming, Zaragoza, Spain, pp. 1092-1097.
Lin, H., Long, A., Clifford, M., Wang, J. and Harrison, P. (2007) Predictive FE modelling of prepreg forming to determine optimum processing conditions. In: 10th ESAFORM Conference on Materials Forming, Zaragosa, Spain, 18-20 April 2007, pp. 1092-1097. ISBN 9780735404144(doi:10.1063/1.2729660)
Djoko, J. K., Ebobisse, F., McBride, A. T. and Reddy, B. D. (2007) A discontinuous Galerkin formulation for classical and gradient plasticity - Part 2: Algorithms and numerical analysis. Computer Methods in Applied Mechanics and Engineering, 196(1-4), pp. 1-21. (doi:10.1016/j.cma.2007.06.027)
Djoko, J. K., Ebobisse, F., McBride, A. and Reddy, B. D. (2007) A discontinuous Galerkin formulation for classical and gradient plasticity. Part 1: Formulation and analysis. Computer Methods in Applied Mechanics and Engineering, 197(37-40), pp. 3881-3897. (doi:10.1016/j.cma.2006.10.045)
2006
Grassl, P. and Jirasek, M. (2006) Damage-plastic model for concrete failure. International Journal of Solids and Structures, 43(22-23), pp. 7166-7196. (doi: 10.1016/j.ijsolstr.2006.06.032)
Grassl, P. and Jirásek, M. (2006) Plastic model with non-local damage applied to concrete. International Journal for Numerical and Analytical Methods in Geomechanics, 30(1), pp. 71-90. (doi: 10.1002/nag.479)
Grassl, P. and Bazant, Z. (2006) Lattice-cell approach to modeling elastic solids. In: Joint Conference of the Association for Computational Mechanics in Engineering (UK) and the Irish Society for Scientific and Engineering Computation, Belfast, UK, 19-20 April, pp. 171-174. ISBN 085389 8944
Grassl, P., Bazant, Z. and Cusatis, G. (2006) Lattice-cell approach to quasibrittle fracture modeling. In: EURO-C 2006 - Computational Modelling of Concrete Structures, Mayrhofen, Tirol, Austria, 27-30 March, pp. 263-268. ISBN 0 415 39749 9
Wong, C.C., Long, A.C., Sherburn, M., Robitaille, F., Harrison, P. and Rudd, C.D. (2006) Comparisons of novel and efficient approaches for permeability prediction based on the fabric architecture. Composites Part A: Applied Science and Manufacturing, 37(6), pp. 847-857.(doi:10.1016/j.compositesa.2005.01.020)
Harrison, P., Long, A., Yu, W. and Clifford, M. (2006) Investigating the performance of two different constitutive models for viscous textile. In: 8th INt Conf on Textile Composites (TEXCOMP), Nottingham, UK
Lin, H., Evans, P. and Harrison, P. (2006) An Experimental Investigation into the Factors Affecting the Forming Performance of Thermoset Prepreg.In: 9th Int. ESAFORM Conf. on Materials Forming, Glasgow
Lin, H., Harrison, P., Van,De,Haar,, K., Wang, J., Long, A., Akkerman, R. and Clifford, M. (2006) Investigation of Tool-Ply Friction of Textile Composites. In: 8th Int Conf on Textile Composites (TEXCOMP), Nottingham, UK
Lin, H., Wang, J., Long, A., Clifford, M. and Harrison, P. (2006) Textile Wrinkling in Composite Forming. In: AUTEX World Textile Conference, Raleigh, North Carolina, USA
Long, A., Skordos, A., Harrison, P., Clifford, M. and Sutcliffe, M. (2006) Optimisation of Sheet Forming for Textile Composites Using Variable Peripheral Pressure. In: Society for the Advancement of Material and Process Engineering (SAMPE), Paris, France
Wang, J., Harrison, P., Long, A. and Clifford, M. (2006) Prediction and Characterisation of the Shear Behaviour of Viscous Woven Textile Composites. In: 8th Int Conf on Flow Processes in Composite Materials (FPCM8), Douai, France
Wang, J., Lin, H., Long, A., Clifford, M. and Harrison, P. (2006) Predictive Modelling and Experimental Measurements of the Bending Behaviour of Viscous Textile Composites. In: 9th Int. ESAFORM Conference on Materials Forming, Glasgow
Powell, M.S. and McBride, A.T. (2006) What is required from DEM simulations to model breakage in mills? Minerals Engineering, 19, pp. 1013-1021. (doi:10.1016/j.mineng.2006.03.009)
Grassl, P. and Jirásek, M. (2006) Plastic model with non-local damage applied to concrete. International Journal for Numerical and Analytical Methods in Geomechanics, 30(1), pp. 71-90. (doi: 10.1002/nag.479)
Grassl, P. and Bazant, Z. (2006) Lattice-cell approach to modeling elastic solids. In: Joint Conference of the Association for Computational Mechanics in Engineering (UK) and the Irish Society for Scientific and Engineering Computation, Belfast, UK, 19-20 April, pp. 171-174. ISBN 085389 8944
Grassl, P., Bazant, Z. and Cusatis, G. (2006) Lattice-cell approach to quasibrittle fracture modeling. In: EURO-C 2006 - Computational Modelling of Concrete Structures, Mayrhofen, Tirol, Austria, 27-30 March, pp. 263-268. ISBN 0 415 39749 9
Wong, C.C., Long, A.C., Sherburn, M., Robitaille, F., Harrison, P. and Rudd, C.D. (2006) Comparisons of novel and efficient approaches for permeability prediction based on the fabric architecture. Composites Part A: Applied Science and Manufacturing, 37(6), pp. 847-857.(doi:10.1016/j.compositesa.2005.01.020)
Harrison, P., Long, A., Yu, W. and Clifford, M. (2006) Investigating the performance of two different constitutive models for viscous textile. In: 8th INt Conf on Textile Composites (TEXCOMP), Nottingham, UK
Lin, H., Evans, P. and Harrison, P. (2006) An Experimental Investigation into the Factors Affecting the Forming Performance of Thermoset Prepreg.In: 9th Int. ESAFORM Conf. on Materials Forming, Glasgow
Lin, H., Harrison, P., Van,De,Haar,, K., Wang, J., Long, A., Akkerman, R. and Clifford, M. (2006) Investigation of Tool-Ply Friction of Textile Composites. In: 8th Int Conf on Textile Composites (TEXCOMP), Nottingham, UK
Lin, H., Wang, J., Long, A., Clifford, M. and Harrison, P. (2006) Textile Wrinkling in Composite Forming. In: AUTEX World Textile Conference, Raleigh, North Carolina, USA
Long, A., Skordos, A., Harrison, P., Clifford, M. and Sutcliffe, M. (2006) Optimisation of Sheet Forming for Textile Composites Using Variable Peripheral Pressure. In: Society for the Advancement of Material and Process Engineering (SAMPE), Paris, France
Wang, J., Harrison, P., Long, A. and Clifford, M. (2006) Prediction and Characterisation of the Shear Behaviour of Viscous Woven Textile Composites. In: 8th Int Conf on Flow Processes in Composite Materials (FPCM8), Douai, France
Wang, J., Lin, H., Long, A., Clifford, M. and Harrison, P. (2006) Predictive Modelling and Experimental Measurements of the Bending Behaviour of Viscous Textile Composites. In: 9th Int. ESAFORM Conference on Materials Forming, Glasgow
Powell, M.S. and McBride, A.T. (2006) What is required from DEM simulations to model breakage in mills? Minerals Engineering, 19, pp. 1013-1021. (doi:10.1016/j.mineng.2006.03.009)
2005
Yu, W.R., Harrison, P. and Long, A. (2005) Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation.Composites Part A: Applied Science and Manufacturing, 36(8), pp. 1079-1093. (doi:10.1016/j.compositesa.2005.01.007)
Harrison, P., Yu, W.-R., Wang, J., Long, A. C. and Clifford, M. (2005) A predictive approach to simulating the forming of viscous textile composite sheet. European Journal of Computational Mechanics, 14(6-7), pp. 613-631. (doi:10.3166/reef.14.613-631)
Endruweit, A., Wong, C., Harrison, P. and Long, A. (2005) Dual Scale Modelling of Flow Through Non-Uniform Bi-Directional Fabrics. In: 15th Int. Conf. on Composite Materials, Durban, S. Africa
Harrison, P., Haylock, T. and Long, A. (2005) Measurement of the Transverse and Axial Viscosities of Continuous Fibre Reinforced Composites. In: 8th Int. ESAFORM Conf. on Materials Forming, Cluj-Napoca, Romania
Harrison, P., Tan, M. and Long, A. (2005) Kinematics of Intra-Ply Slip in Textile Composites during Bias Extension Tests. In: 8th Int. ESAFORM Conf. on Materials Forming, Cluj-Napoca, Romania
Harrison, P., Yu, W., Wang, J., Baillie, T., Long, A. and Clifford, M. (2005) Numerical evaluation of a Rate Dependant Model for Viscous Textile Composites. In: 15th Int. Conf. on Composite Materials, Durban, S. Africa
Harrison, P. and Clifford, M.J. (2005) Rheological behaviour of pre-impregnated textiles. In: Long, A.C. (ed.) Design and Manufacture of Textile Composites. Woodhead Publishing: Cambridge, UK. ISBN 9781855737440
Kim, K., Yu, W., Harrison, P., Hong, S., Lee, B. and Park, H. (2005) Optimum consolidation of self-reinforcing composite and its time dependent deformation. In: 16th International Conference on Composite Materials, Kyoto, Japan
Yu, W., Harrison, P. and Long, A. (2005) Finite Element Forming Simulation of NCF Considering Natural Fibre Variability. In: 8th Int. ESAFORM Conf. on Materials Forming, Cluj-Napoca, Romania,
Harrison, P., Yu, W.-R., Wang, J., Long, A. C. and Clifford, M. (2005) A predictive approach to simulating the forming of viscous textile composite sheet. European Journal of Computational Mechanics, 14(6-7), pp. 613-631. (doi:10.3166/reef.14.613-631)
Endruweit, A., Wong, C., Harrison, P. and Long, A. (2005) Dual Scale Modelling of Flow Through Non-Uniform Bi-Directional Fabrics. In: 15th Int. Conf. on Composite Materials, Durban, S. Africa
Harrison, P., Haylock, T. and Long, A. (2005) Measurement of the Transverse and Axial Viscosities of Continuous Fibre Reinforced Composites. In: 8th Int. ESAFORM Conf. on Materials Forming, Cluj-Napoca, Romania
Harrison, P., Tan, M. and Long, A. (2005) Kinematics of Intra-Ply Slip in Textile Composites during Bias Extension Tests. In: 8th Int. ESAFORM Conf. on Materials Forming, Cluj-Napoca, Romania
Harrison, P., Yu, W., Wang, J., Baillie, T., Long, A. and Clifford, M. (2005) Numerical evaluation of a Rate Dependant Model for Viscous Textile Composites. In: 15th Int. Conf. on Composite Materials, Durban, S. Africa
Harrison, P. and Clifford, M.J. (2005) Rheological behaviour of pre-impregnated textiles. In: Long, A.C. (ed.) Design and Manufacture of Textile Composites. Woodhead Publishing: Cambridge, UK. ISBN 9781855737440
Kim, K., Yu, W., Harrison, P., Hong, S., Lee, B. and Park, H. (2005) Optimum consolidation of self-reinforcing composite and its time dependent deformation. In: 16th International Conference on Composite Materials, Kyoto, Japan
Yu, W., Harrison, P. and Long, A. (2005) Finite Element Forming Simulation of NCF Considering Natural Fibre Variability. In: 8th Int. ESAFORM Conf. on Materials Forming, Cluj-Napoca, Romania,
2004
Grassl, P. (2004) Modelling of dilation of concrete and its effect in triaxial compression. Finite Elements in Analysis and Design, 40(9-10), pp. 1021-1033. (doi: 10.1016/j.finel.2003.04.002)
Jirásek, M., Rolshoven, S. and Grassl, P. (2004) Size effect on fracture energy induced by non-locality. International Journal for Numerical and Analytical Methods in Geomechanics, 28(7-8), pp. 653-670. (doi: 10.1002/nag.364)
Grassl, P. and Jirasek, M. (2004) Nonlocal plastic models for cohesive-frictional materials. In: Herrmann, J., Ehlers, W., Vermeer, P.A. and Ramm, E. (eds.) Modelling of Cohesive-Frictional Materials: Proceedings of Second International Symposium on Continuous and Discontinuous Modelling of Cohesive-Frictional Materials (CDM 2004). A.A. Balkema, pp. 323-337. ISBN 9780415360234 (doi:10.1201/9780203023631.ch24)
Harrison, P., Clifford, M.J. and Long, A.C. (2004) Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments. Composites Science and Technology, 64(10-11), pp. 1453-1465. (doi:10.1016/j.compscitech.2003.10.015)
Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. (2004) A constituent-based predictive approach to modelling the rheology of viscous textile composites. Composites Part A: Applied Science and Manufacturing, 35(7-8), pp. 915-931. (doi:10.1016/j.compositesa.2004.01.005)
Long, A., Wiggers, J. and Harrison, P. (2004) Modelling the Effects of Blank-Holder Pressure and Material Variability on Forming of Textile Preforms. In: 8th Int. ESAFORM Conf. on Materials Forming, Cluj-Napoca, Romania
Govender, I., McBride, A.T. and Powell, M.S. (2004) Improved experimental tracking techniques for validating discrete element method simulations of tumbling mills. Experimental Mechanics, 44(6), pp. 593-607. (doi:10.1007/BF02428249)
Powell, M. S. and McBride, A. T. (2004) A three-dimensional analysis of media motion and grinding regions in mills. Minerals Engineering, 17(11-12), pp. 1099-1109.(doi:10.1016/j.mineng.2004.06.022)
McBride, A. , Govender, I., Powell, M. and Cloete, T. (2004) Contributions to the experimental validation of the discrete element method applied to tumbling mills. Engineering Computations, 21(2/3/4), pp. 119-136. (doi:10.1108/02644400410519703)
McBride, A.T. , Makepe, T. and Scheele, F. (2004) Discrete Element Method Analysis of A Bearing Capacity Experiment. In: 2nd International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, 5-7 Jul 2004, pp. 1003-1008. ISBN 9789058095688
Sarracino, R., McBride, A.T. and Powell, M.S. (2004) Using Particle Flow Code to Investigate Energy Dissipation in a Rotary Grinding Mill. In: Numerical Modeling in Micromechanics via Particle Methods, Kyoto, Japan, 28-29 Oct 2004, pp. 111-118. ISBN 9058096793
Jirásek, M., Rolshoven, S. and Grassl, P. (2004) Size effect on fracture energy induced by non-locality. International Journal for Numerical and Analytical Methods in Geomechanics, 28(7-8), pp. 653-670. (doi: 10.1002/nag.364)
Grassl, P. and Jirasek, M. (2004) Nonlocal plastic models for cohesive-frictional materials. In: Herrmann, J., Ehlers, W., Vermeer, P.A. and Ramm, E. (eds.) Modelling of Cohesive-Frictional Materials: Proceedings of Second International Symposium on Continuous and Discontinuous Modelling of Cohesive-Frictional Materials (CDM 2004). A.A. Balkema, pp. 323-337. ISBN 9780415360234 (doi:10.1201/9780203023631.ch24)
Harrison, P., Clifford, M.J. and Long, A.C. (2004) Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments. Composites Science and Technology, 64(10-11), pp. 1453-1465. (doi:10.1016/j.compscitech.2003.10.015)
Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. (2004) A constituent-based predictive approach to modelling the rheology of viscous textile composites. Composites Part A: Applied Science and Manufacturing, 35(7-8), pp. 915-931. (doi:10.1016/j.compositesa.2004.01.005)
Long, A., Wiggers, J. and Harrison, P. (2004) Modelling the Effects of Blank-Holder Pressure and Material Variability on Forming of Textile Preforms. In: 8th Int. ESAFORM Conf. on Materials Forming, Cluj-Napoca, Romania
Govender, I., McBride, A.T. and Powell, M.S. (2004) Improved experimental tracking techniques for validating discrete element method simulations of tumbling mills. Experimental Mechanics, 44(6), pp. 593-607. (doi:10.1007/BF02428249)
Powell, M. S. and McBride, A. T. (2004) A three-dimensional analysis of media motion and grinding regions in mills. Minerals Engineering, 17(11-12), pp. 1099-1109.(doi:10.1016/j.mineng.2004.06.022)
McBride, A. , Govender, I., Powell, M. and Cloete, T. (2004) Contributions to the experimental validation of the discrete element method applied to tumbling mills. Engineering Computations, 21(2/3/4), pp. 119-136. (doi:10.1108/02644400410519703)
McBride, A.T. , Makepe, T. and Scheele, F. (2004) Discrete Element Method Analysis of A Bearing Capacity Experiment. In: 2nd International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, 5-7 Jul 2004, pp. 1003-1008. ISBN 9789058095688
Sarracino, R., McBride, A.T. and Powell, M.S. (2004) Using Particle Flow Code to Investigate Energy Dissipation in a Rotary Grinding Mill. In: Numerical Modeling in Micromechanics via Particle Methods, Kyoto, Japan, 28-29 Oct 2004, pp. 111-118. ISBN 9058096793
2003
Gil, R.G., Long, A.C., Clifford, M.J. and Harrison, P. (2003) Modelling of isothermal consolidation in glass–polypropylene commingled composite.Plastics, Rubber and Composites, 32(2), pp. 47-56. (doi:10.1179/146580103225009031)
Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. (2003) A Constitutive Model Based on Meso and Micro Kinmatics for Impregnated Wover Continuous Fibre Reinforced Compsites. In: Composites Testing and Model Identification, Chalons-en-Champagne, France, 28 - 30 January 2003
Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. (2003) Constitutive Modelling of Shear Deformation for Impregnated Textile Composites. In: 6th International ESAFORM Conference on Material Forming, Salerno, Italy, 28-30 April 2003
Harrison, P. and Maltman, A.J. (2003) Numerical modelling of reverse density structures in soft non-Newtonian sediments. In: Van Rensbergen, P., Hillis, R., Maltman, A. and Morley, C. (eds.) Subsurface Sediment Mobilisation. Series: Special Publications. Geological Society, London. ISBN 1862391416
Harrison, P., Wiggers, J., Long, A.C. and Rudd, C.D. (2003) A Constitutive Model Based on Meso and Micro Kinematics for Woven and Stitched Dry Fabrics. In: 14th International Conference on Composite Materials, San Diego, USA, 14 - 18 July 2003
Wiggers, J., Long, A.C., Harrison, P. and Rudd, C.D. (2003) The Effects of Stitch Architecture on the Shear Complinace of Non-Crimp Fabrics. In: 6th International ESAFORM Conference on Materials Forming, Salerno, Italy, 28-30 April 2003, pp. 851-854.
Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. (2003) A Constitutive Model Based on Meso and Micro Kinmatics for Impregnated Wover Continuous Fibre Reinforced Compsites. In: Composites Testing and Model Identification, Chalons-en-Champagne, France, 28 - 30 January 2003
Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. (2003) Constitutive Modelling of Shear Deformation for Impregnated Textile Composites. In: 6th International ESAFORM Conference on Material Forming, Salerno, Italy, 28-30 April 2003
Harrison, P. and Maltman, A.J. (2003) Numerical modelling of reverse density structures in soft non-Newtonian sediments. In: Van Rensbergen, P., Hillis, R., Maltman, A. and Morley, C. (eds.) Subsurface Sediment Mobilisation. Series: Special Publications. Geological Society, London. ISBN 1862391416
Harrison, P., Wiggers, J., Long, A.C. and Rudd, C.D. (2003) A Constitutive Model Based on Meso and Micro Kinematics for Woven and Stitched Dry Fabrics. In: 14th International Conference on Composite Materials, San Diego, USA, 14 - 18 July 2003
Wiggers, J., Long, A.C., Harrison, P. and Rudd, C.D. (2003) The Effects of Stitch Architecture on the Shear Complinace of Non-Crimp Fabrics. In: 6th International ESAFORM Conference on Materials Forming, Salerno, Italy, 28-30 April 2003, pp. 851-854.
2002
Grassl, P. , Lundgren, K. and Gylltoft, K. (2002) Concrete in compression: a plasticity theory with a novel hardening law. International Journal of Solids and Structures, 39(20), pp. 5205-5223. (doi: 10.1016/S0020-7683(02)00408-0)
Harrison, P., Clifford, M.J. and Long, A.C. (2002) Constitutive modelling of impregnated continuous fibre reinforced composites micromechanical approach. Plastics, Rubber and Composites, 31(2), pp. 76-86.
Harrison, P., Clifford, M.J. and Long, A.C. (2002) Shear Characterisation of Woven Textile Composites. In: 10th European Conference on Composite Materials, Brugge, Belgium, 3 - 7 June 2002
Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. (2002) A Micro-Mechanicalconstitutive Model for Continuous Fibre Reinforced Impregnated Composites. In: 5th International ESAFORM Conference on Materials Forming, Krakow, Poland, 15 - 17 April 2002, pp. 275-278.
Harrison, P., Long, A.C., Clifford, M.J., Garcia Gil, R., Ward, I.M. and Hine, P.J. (2002) Investigation of Thermoformability and Molecular Structure of Curv TM. In: Automotive Composites and Plastics, Basildon, UK, 3 - 4 December 2002
Long, A.C., Clifford, M.J., Gacria Gil, R., Harrison, P., Rudd, C.D., Sharma, S.B. and Sutcliffe, M.P.F. (2002) Experimental Analysis of Fabric Deformation During Forming of Textile Composites. In: 5th International ESAFORM Conference on Materials Forming, Krakow, Poland, 15-17 April 2002, pp. 279-282.
Sutcliffe, M.P.F., Sharma, S.B., Long, A.C., Clifford, M.J., Garcia Gil, G., Harrison, P. and Rudd, C.D. (2002) A Comparison of Simulation Approaches for Forming of Textile Composites. In: 5th International ESAFORM Conference on Materials Forming, Krakow, Poland, 15-17 April 2002, pp. 311-314.
Harrison, P., Clifford, M.J. and Long, A.C. (2002) Constitutive modelling of impregnated continuous fibre reinforced composites micromechanical approach. Plastics, Rubber and Composites, 31(2), pp. 76-86.
Harrison, P., Clifford, M.J. and Long, A.C. (2002) Shear Characterisation of Woven Textile Composites. In: 10th European Conference on Composite Materials, Brugge, Belgium, 3 - 7 June 2002
Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. (2002) A Micro-Mechanicalconstitutive Model for Continuous Fibre Reinforced Impregnated Composites. In: 5th International ESAFORM Conference on Materials Forming, Krakow, Poland, 15 - 17 April 2002, pp. 275-278.
Harrison, P., Long, A.C., Clifford, M.J., Garcia Gil, R., Ward, I.M. and Hine, P.J. (2002) Investigation of Thermoformability and Molecular Structure of Curv TM. In: Automotive Composites and Plastics, Basildon, UK, 3 - 4 December 2002
Long, A.C., Clifford, M.J., Gacria Gil, R., Harrison, P., Rudd, C.D., Sharma, S.B. and Sutcliffe, M.P.F. (2002) Experimental Analysis of Fabric Deformation During Forming of Textile Composites. In: 5th International ESAFORM Conference on Materials Forming, Krakow, Poland, 15-17 April 2002, pp. 279-282.
Sutcliffe, M.P.F., Sharma, S.B., Long, A.C., Clifford, M.J., Garcia Gil, G., Harrison, P. and Rudd, C.D. (2002) A Comparison of Simulation Approaches for Forming of Textile Composites. In: 5th International ESAFORM Conference on Materials Forming, Krakow, Poland, 15-17 April 2002, pp. 311-314.
2001
Harrison, P., Janssen, L.J.P., Navez, V.P., Peters, G.W.M. and Baaijens, F.P.T. (2001) Birefringence measurements on polymer melts in an axisymmetric flow cell. Rheologica Acta, 41(1 - 2), pp. 114-133. (doi:10.1007/s003970200011)
Harrison, P., Janssen, L.J.P., Navez, V., Peters, G.W.M. and Baaijens, F.P.T. (2001) Birefringence Measurements on Polymer Melts in an Axisymmetric Flowcell. In: The Society of Rheology 72nd Annual Meeting Program and Abstracts, Hilton Head, USA, 5 - 11 February 2001
Long, A.C., Clifford, M.J., Harrison, P. and Rudd, C.D. (2001) Modelling of Draping and Deformation of Textile Composites. In: International Conference for Manufacturing of Advanced Composites, Belfast, UK, 27 - 28 September 2001, pp. 66-76.
Harrison, P., Janssen, L.J.P., Navez, V., Peters, G.W.M. and Baaijens, F.P.T. (2001) Birefringence Measurements on Polymer Melts in an Axisymmetric Flowcell. In: The Society of Rheology 72nd Annual Meeting Program and Abstracts, Hilton Head, USA, 5 - 11 February 2001
Long, A.C., Clifford, M.J., Harrison, P. and Rudd, C.D. (2001) Modelling of Draping and Deformation of Textile Composites. In: International Conference for Manufacturing of Advanced Composites, Belfast, UK, 27 - 28 September 2001, pp. 66-76.
1999
Harrison, P. and Navard, P. (1999) Band Texture in Liquid Crystalline Polymers. In: Europhysics Conference on Macromolecular Physics, France, 3 - 7 May 1999
Harrison, P. and Navard, P. (1999) Investigation of the bank texture occurring in hydroxypropylcellulose solutions using rheo-optical, rheological and small angle light scattering techniques. Rheologica Acta, 38(6), pp. 569-593. (doi:10.1007/s003970050209)
Harrison, P., Navard, P. and Cidade, M.T. (1999) Investigation of the band texture occurring in acetoxypropylcellulose thermotropic liquid crystalline polymner using rheo-optical, rheological and light scattering techniques. Rheologica Acta, 38(6), pp. 594-605.(doi:10.1007/s003970050210)
Harrison, P. and Navard, P. (1999) Investigation of the bank texture occurring in hydroxypropylcellulose solutions using rheo-optical, rheological and small angle light scattering techniques. Rheologica Acta, 38(6), pp. 569-593. (doi:10.1007/s003970050209)
Harrison, P., Navard, P. and Cidade, M.T. (1999) Investigation of the band texture occurring in acetoxypropylcellulose thermotropic liquid crystalline polymner using rheo-optical, rheological and light scattering techniques. Rheologica Acta, 38(6), pp. 594-605.(doi:10.1007/s003970050210)
1998
Harrison, P. and Navard, P. (1998) Band Texture Formation in Liquid Crystalline Polymers. In: 5th European Rheology Conference, Portooz, Slovenia, 6 - 11 September 1998
1997
Harrison, P. and Navard, P. (1997) Flow Induced Structures Formed During the Shear Relaxation of Liquid Crystalline Polymers. In: The Society of Rheology 69th Annual Meeing Program and Abstracts, Ohio, USA, 19-23 October 1997
Harrison, P. and Navard, P. (1997) Rheological Behavior of a Liquid Crystal Polymer Solution During its Relaxation Through the Development of Bands. In: GDR Rheo-physique des suspension et colloides, Strasbourg, France, 30 June to 2 July 1997
Harrison, P. and Navard, P. (1997) Rheological Behavior of a Liquid Crystal Polymer Solution During its Relaxation Through the Development of Bands. In: Reunion de reseau cristaux liquides, Leuven, Belgium, 5 - 6 June 1997
Harrison, P. and Navard, P. (1997) Rheological Behavior of a Liquid Crystal Polymer Solution During its Relaxation Through the Development of Bands. In: GDR Rheo-physique des suspension et colloides, Strasbourg, France, 30 June to 2 July 1997
Harrison, P. and Navard, P. (1997) Rheological Behavior of a Liquid Crystal Polymer Solution During its Relaxation Through the Development of Bands. In: Reunion de reseau cristaux liquides, Leuven, Belgium, 5 - 6 June 1997