Publications by Daniel Mulvihill
2021
Min, G., Pullanchiyodan, A., Dahiya, A. S., Hosseini, E. S., Xu, Y. , Mulvihill, D. M. and Dahiya, R. (2021) Ferroelectric-assisted high-performance triboelectric nanogenerators based on electrospun P(VDF-TrFE) composite nanofibers with barium titanate nanofillers. Nano Energy, 90(Part A), 106600. (doi: 10.1016/j.nanoen.2021.106600)
Hamilton, A., Perris, J., Convery, N., Mulvihill, D. M. and Gadegaard, N. (2021) Flexible inserts for injection molding of complex micro-structured polymer components. Macromolecular Materials and Engineering, 306(9), 2100223. (doi: 10.1002/mame.202100223)
Perris, J., Xu, Y. , Kartal, M. E., Gadegaard, N. and Mulvihill, D. M. (2021) Tailorable and repeatable normal contact stiffness via micropatterned interfaces. Tribology Letters, 69, 106. (doi: 10.1007/s11249-021-01473-3)
Min, G., Xu, Y. , Cochran, P., Gadegaard, N. , Mulvihill, D. M. and Dahiya, R. (2021) Origin of the contact force-dependent response of triboelectric nanogenerators. Nano Energy, 83, 105829. (doi: 10.1016/j.nanoen.2021.105829)
Hamilton, A., Xu, Y. , Kartal, M. E., Gadegaard, N. and Mulvihill, D. M. (2021) Enhancing strength and toughness of adhesive joints via micro-structured mechanical interlocking. International Journal of Adhesion and Adhesives, 105, 102775. (doi: 10.1016/j.ijadhadh.2020.102775)
Sneddon, S., Xu, Y. , Dixon, M., Rugg, D., Li, P. and Mulvihill, D. M. (2021) Sensitivity of material failure to surface roughness: a study on titanium alloys Ti64 and Ti407. Materials and Design, 200, 109438. (doi: 10.1016/j.matdes.2020.109438)
Sneddon, S., Mulvihill, D. M. , Wielewski, E. , Dixon, M., Rugg, D. and Li, P. (2021) Deformation and failure behaviour of a titanium alloy Ti-407 with reduced aluminium content: a comparison with Ti-6Al-4V in tension and compression. Materials Characterization, 172, 110901. (doi: 10.1016/j.matchar.2021.110901)
Bin Jaber, S., Hamilton, A., Xu, Y. , Kartal, M. E., Gadegaard, N. and Mulvihill, D. M. (2021) Friction of flat and micropatterned interfaces with nanoscale roughness. Tribology International, 153, 106563. (doi: 10.1016/j.triboint.2020.106563)
Hamilton, A., Perris, J., Convery, N., Mulvihill, D. M. and Gadegaard, N. (2021) Flexible inserts for injection molding of complex micro-structured polymer components. Macromolecular Materials and Engineering, 306(9), 2100223. (doi: 10.1002/mame.202100223)
Perris, J., Xu, Y. , Kartal, M. E., Gadegaard, N. and Mulvihill, D. M. (2021) Tailorable and repeatable normal contact stiffness via micropatterned interfaces. Tribology Letters, 69, 106. (doi: 10.1007/s11249-021-01473-3)
Min, G., Xu, Y. , Cochran, P., Gadegaard, N. , Mulvihill, D. M. and Dahiya, R. (2021) Origin of the contact force-dependent response of triboelectric nanogenerators. Nano Energy, 83, 105829. (doi: 10.1016/j.nanoen.2021.105829)
Hamilton, A., Xu, Y. , Kartal, M. E., Gadegaard, N. and Mulvihill, D. M. (2021) Enhancing strength and toughness of adhesive joints via micro-structured mechanical interlocking. International Journal of Adhesion and Adhesives, 105, 102775. (doi: 10.1016/j.ijadhadh.2020.102775)
Sneddon, S., Xu, Y. , Dixon, M., Rugg, D., Li, P. and Mulvihill, D. M. (2021) Sensitivity of material failure to surface roughness: a study on titanium alloys Ti64 and Ti407. Materials and Design, 200, 109438. (doi: 10.1016/j.matdes.2020.109438)
Sneddon, S., Mulvihill, D. M. , Wielewski, E. , Dixon, M., Rugg, D. and Li, P. (2021) Deformation and failure behaviour of a titanium alloy Ti-407 with reduced aluminium content: a comparison with Ti-6Al-4V in tension and compression. Materials Characterization, 172, 110901. (doi: 10.1016/j.matchar.2021.110901)
Bin Jaber, S., Hamilton, A., Xu, Y. , Kartal, M. E., Gadegaard, N. and Mulvihill, D. M. (2021) Friction of flat and micropatterned interfaces with nanoscale roughness. Tribology International, 153, 106563. (doi: 10.1016/j.triboint.2020.106563)
2020
Harrison, P. , Campbell, I., Guliyev, E., McLelland, B., Gomes, R., Curado-Correia, N., McGookin, E. and Mulvihill, D.M. (2020) Induction melt thermoforming of advanced multi-axial thermoplastic composite laminates. Journal of Manufacturing Processes, 60, pp. 673-683. (doi: 10.1016/j.jmapro.2020.10.026)
Xu, Y. , Min, G., Gadegaard, N. , Dahiya, R. and Mulvihill, D. M. (2020) A unified contact force-dependent model for triboelectric nanogenerators accounting for surface roughness. Nano Energy, 76, 105067. (doi: 10.1016/j.nanoen.2020.105067)
Min, G., Manjakkal, L. , Mulvihill, D. M. and Dahiya, R. S. (2020) Triboelectric nanogenerator with enhanced performance via an optimized low permittivity substrate. IEEE Sensors Journal, 20(13), pp. 6856-6862. (doi: 10.1109/JSEN.2019.2938605)
Hastie, J. C., Kartal, M. E., Carter, L. N., Attallah, M. M. and Mulvihill, D. (2020) Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: influence of processing parameters and heat treatment. Materials Characterization, 163, 110225. (doi: 10.1016/j.matchar.2020.110225)
Xu, Y. , Min, G., Gadegaard, N. , Dahiya, R. and Mulvihill, D. M. (2020) A unified contact force-dependent model for triboelectric nanogenerators accounting for surface roughness. Nano Energy, 76, 105067. (doi: 10.1016/j.nanoen.2020.105067)
Min, G., Manjakkal, L. , Mulvihill, D. M. and Dahiya, R. S. (2020) Triboelectric nanogenerator with enhanced performance via an optimized low permittivity substrate. IEEE Sensors Journal, 20(13), pp. 6856-6862. (doi: 10.1109/JSEN.2019.2938605)
Hastie, J. C., Kartal, M. E., Carter, L. N., Attallah, M. M. and Mulvihill, D. (2020) Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: influence of processing parameters and heat treatment. Materials Characterization, 163, 110225. (doi: 10.1016/j.matchar.2020.110225)
2018
Min, G., Manjakkal, L. , Mulvihill, D. M. and Dahiya, R. S. (2018) Enhanced Triboelectric Nanogenerator Performance via an Optimised Low Permittivity, Low Thickness Substrate. In: IEEE Sensors Conference, New Delhi, India, 28-31 Oct 2018, ISBN 9781538647080 (doi:10.1109/ICSENS.2018.8589631)
Avgoulas, E.I., Mulvihill, D.M. , Endruweit, A., Sutcliffe, M.P.F., Warrior, N.A., De Focatiis, D.S.A. and Long, A.C. (2018) Frictional behaviour of non-crimp fabrics (NCFs) in contact with a forming tool. Tribology International, 121, pp. 71-77. (doi: 10.1016/j.triboint.2018.01.026)
Sutcliffe, M. P.F., Mulvihill, D. and Smerdova, O. (2018) Friction Between a Dry Fibre Bundle and Rough or Smooth Surfaces. 10th European Solid Mechanics Conference, Bologna, Italy, 2-6 July 2018.
Avgoulas, E.I., Mulvihill, D.M. , Endruweit, A., Sutcliffe, M.P.F., Warrior, N.A., De Focatiis, D.S.A. and Long, A.C. (2018) Frictional behaviour of non-crimp fabrics (NCFs) in contact with a forming tool. Tribology International, 121, pp. 71-77. (doi: 10.1016/j.triboint.2018.01.026)
Sutcliffe, M. P.F., Mulvihill, D. and Smerdova, O. (2018) Friction Between a Dry Fibre Bundle and Rough or Smooth Surfaces. 10th European Solid Mechanics Conference, Bologna, Italy, 2-6 July 2018.
2017
Kartal, M.E., Dugdale, L.H., Harrigan, J.J., Siddiq, M.A., Pokrajac, D. and Mulvihill, D.M. (2017) Three-dimensional in situ observations of compressive damage mechanisms in syntactic foam using X-ray microcomputed tomography. Journal of Materials Science, 52(17), pp. 10186-10197. (doi: 10.1007/s10853-017-1177-4)
Mulvihill, D. M. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Experimental Observations on the Friction of Textile Fibres Relevant to Carbon Fibre Composite Forming. 12th BSSM Conference, Sheffield, UK, 29-31 Aug 2017.
Mulvihill, D. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Friction of Fibrous Tows. 6th European Conference on Tribology (ECOTRIB), Ljubljana, Slovenia, 7-9 June 2017.
Mulvihill, D. M. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Friction of carbon fibre tows. Composites Part A: Applied Science and Manufacturing, 93, pp. 185-198. (doi: 10.1016/j.compositesa.2016.08.034)
Mulvihill, D. M. and Sutcliffe, M. P.F. (2017) Effect of tool surface topography on friction with carbon fibre tows for composite fabric forming. Composites Part A: Applied Science and Manufacturing, 93, pp. 199-206. (doi: 10.1016/j.compositesa.2016.10.017)
Mulvihill, D. M. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Experimental Observations on the Friction of Textile Fibres Relevant to Carbon Fibre Composite Forming. 12th BSSM Conference, Sheffield, UK, 29-31 Aug 2017.
Mulvihill, D. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Friction of Fibrous Tows. 6th European Conference on Tribology (ECOTRIB), Ljubljana, Slovenia, 7-9 June 2017.
Mulvihill, D. M. , Smerdova, O. and Sutcliffe, M. P.F. (2017) Friction of carbon fibre tows. Composites Part A: Applied Science and Manufacturing, 93, pp. 185-198. (doi: 10.1016/j.compositesa.2016.08.034)
Mulvihill, D. M. and Sutcliffe, M. P.F. (2017) Effect of tool surface topography on friction with carbon fibre tows for composite fabric forming. Composites Part A: Applied Science and Manufacturing, 93, pp. 199-206. (doi: 10.1016/j.compositesa.2016.10.017)
2016
Mulvihill, D. M. , O'Brien, N. P., Curtin, W. A. and McCarthy, M. A. (2016) Potential routes to stronger carbon nanotube fibres via carbon ion irradiation and deposition. Carbon, 96, pp. 1138-1156. (doi: 10.1016/j.carbon.2015.10.055)
2015
Nowell, D., Mulvihill, D. , Parel, K. and Paynter, R.J. (2015) Measurement and Modelling of Contact Stiffness for Rough Contacts. 42nd Leeds-Lyon Symposium on Tribology, Lyon, France, 7-9 Sept 2015.
Smerdova, O., Sutcliffe, M. P.F. and Mulvihill, D. M. (2015) Real Area of Contact in Carbon Fabric Forming. In: 20th International Conference on Composite Materials (ICCM20), Copenhagen, Denmark, 19-24 Jul 2015,
Smerdova, O., Sutcliffe, M. P.F. and Mulvihill, D. M. (2015) Real Area of Contact in Carbon Fabric Forming. In: 20th International Conference on Composite Materials (ICCM20), Copenhagen, Denmark, 19-24 Jul 2015,
2014
Nowell, D., Mulvihill, D. , Brunskill, H., Kartal, M.E. and Dwyer-Joyce, R. (2014) Measurement and Modelling of Interface Stiffness in Frictional Contacts. In: 5th World Tribology Congress (WTC 2013), Torino, Italy, 8-13 Sept 2013, pp. 2232-2235. ISBN 9781634393522
2013
Mulvihill, D.M. , Brunskill, H., Kartal, M.E., Dwyer-Joyce, R.S. and Nowell, D. (2013) A comparison of contact stiffness measurements obtained by the digital image correlation and ultrasound techniques. Experimental Mechanics, 53(7), pp. 1245-1263. (doi: 10.1007/s11340-013-9718-5)
2011
Mulvihill, D.M. , Kartal, M.E., Nowell, D. and Hills, D.A. (2011) An elastic–plastic asperity interaction model for sliding friction. Tribology International, 44(12), pp. 1679-1694. (doi: 10.1016/j.triboint.2011.06.018)
Kartal, M.E., Mulvihill, D.M. , Nowell, D. and Hills, D.A. (2011) Measurements of pressure and area dependent tangential contact stiffness between rough surfaces using digital image correlation. Tribology International, 44(10), pp. 1188-1198. (doi: 10.1016/j.triboint.2011.05.025)
Mulvihill, D.M. , O’Driscoll, C., Stanley, W. and Little, E.G. (2011) A comparison of various patterns of three-dimensional strain rosettes. Strain, 47(s1), e447-e456. (doi: 10.1111/j.1475-1305.2009.00634.x)
Mulvihill, D.M. , Kartal, M.E., Olver, A.V., Nowell, D. and Hills, D.A. (2011) Investigation of non-Coulomb friction behaviour in reciprocating sliding. Wear, 271(5-6), pp. 802-816. (doi: 10.1016/j.wear.2011.03.014)
Mulvihill, D. , Kartal, M.E. and Nowell, D. (2011) An Asperity Interaction Model for Friction. 3rd European Conference on Tribology (ECOTRIB), Vienna, Austria, 7-9 June 2011.
Kartal, M.E., Mulvihill, D.M. , Nowell, D. and Hills, D.A. (2011) Determination of the frictional properties of titanium and nickel alloys using the digital image correlation method. Experimental Mechanics, 51(3), pp. 359-371. (doi: 10.1007/s11340-010-9366-y)
Kartal, M. E., Mulvihill, D. M. , Nowell, D. and Hills, D. A. (2011) Measurement of tangential contact stiffness in frictional contacts: the effect of normal pressure. Applied Mechanics and Materials, 70, pp. 321-326. (doi: 10.4028/www.scientific.net/AMM.70.321)
Mulvihill, D. M. , Kartal, M. E., Nowell, D. and Hills, D. A. (2011) Investigation of the friction variation with sliding which is commonly observed in individual fretting test cycles. Applied Mechanics and Materials, 70, pp. 213-218. (doi: 10.4028/www.scientific.net/AMM.70.213)
Kartal, M.E., Mulvihill, D.M. , Nowell, D. and Hills, D.A. (2011) Measurements of pressure and area dependent tangential contact stiffness between rough surfaces using digital image correlation. Tribology International, 44(10), pp. 1188-1198. (doi: 10.1016/j.triboint.2011.05.025)
Mulvihill, D.M. , O’Driscoll, C., Stanley, W. and Little, E.G. (2011) A comparison of various patterns of three-dimensional strain rosettes. Strain, 47(s1), e447-e456. (doi: 10.1111/j.1475-1305.2009.00634.x)
Mulvihill, D.M. , Kartal, M.E., Olver, A.V., Nowell, D. and Hills, D.A. (2011) Investigation of non-Coulomb friction behaviour in reciprocating sliding. Wear, 271(5-6), pp. 802-816. (doi: 10.1016/j.wear.2011.03.014)
Mulvihill, D. , Kartal, M.E. and Nowell, D. (2011) An Asperity Interaction Model for Friction. 3rd European Conference on Tribology (ECOTRIB), Vienna, Austria, 7-9 June 2011.
Kartal, M.E., Mulvihill, D.M. , Nowell, D. and Hills, D.A. (2011) Determination of the frictional properties of titanium and nickel alloys using the digital image correlation method. Experimental Mechanics, 51(3), pp. 359-371. (doi: 10.1007/s11340-010-9366-y)
Kartal, M. E., Mulvihill, D. M. , Nowell, D. and Hills, D. A. (2011) Measurement of tangential contact stiffness in frictional contacts: the effect of normal pressure. Applied Mechanics and Materials, 70, pp. 321-326. (doi: 10.4028/www.scientific.net/AMM.70.321)
Mulvihill, D. M. , Kartal, M. E., Nowell, D. and Hills, D. A. (2011) Investigation of the friction variation with sliding which is commonly observed in individual fretting test cycles. Applied Mechanics and Materials, 70, pp. 213-218. (doi: 10.4028/www.scientific.net/AMM.70.213)
2010
Nowell, D., Kartal, M.E., Mulvihill, D. M. and Hills, D.A. (2010) A Simple Model for the Prediction of Tangential Contact Stiffness in Frictional Contact. Fourth European Conference on Computational Mechanics, Paris, France, 16-21 May 2010.
Publications by other group authors
All | D. Barbera | S. Bin Jaber | I. Campbell | D. K. Do | M. Docherty | A. Feeney | M. Fotouhi | S. Fotouhi | E. Frutos-Myro | P. Grassl | E. Grustan-Gutiérrez | A. Hamilton | P. Harrison | S. Kumar | J. Lee | P. Li | S. Liu | Y. Liu | A. McBride | G. Min | J. Perris | J. Schneider | S. Sneddon | A. Tabatabaeian | C. Triantafyllou | C. Unluer | E. Wielewski | R. Williams | L. Yusuf
All | D. Barbera | S. Bin Jaber | I. Campbell | D. K. Do | M. Docherty | A. Feeney | M. Fotouhi | S. Fotouhi | E. Frutos-Myro | P. Grassl | E. Grustan-Gutiérrez | A. Hamilton | P. Harrison | S. Kumar | J. Lee | P. Li | S. Liu | Y. Liu | A. McBride | G. Min | J. Perris | J. Schneider | S. Sneddon | A. Tabatabaeian | C. Triantafyllou | C. Unluer | E. Wielewski | R. Williams | L. Yusuf