Publications by Peifeng Li
2021
Damiati, L. A. et al. (2021) Materials-driven fibronectin assembly on nanoscale topography enhances mesenchymal stem cell adhesion, protecting cells from bacterial virulence factors and preventing biofilm formation. Biomaterials, (doi: 10.1016/j.biomaterials.2021.121263) (In Press)
Sneddon, S., Xu, Y. , Dixon, M., Rugg, D., Li, P. and Mulvihill, D. M. (2021) Sensitivity of material failure to surface roughness: a study on titanium alloys Ti64 and Ti407. Materials and Design, 200, 109438. (doi: 10.1016/j.matdes.2020.109438)
Sneddon, S., Mulvihill, D. M. , Wielewski, E. , Dixon, M., Rugg, D. and Li, P. (2021) Deformation and failure behaviour of a titanium alloy Ti-407 with reduced aluminium content: a comparison with Ti-6Al-4V in tension and compression. Materials Characterization, 172, 110901. (doi: 10.1016/j.matchar.2021.110901)
Sneddon, S., Xu, Y. , Dixon, M., Rugg, D., Li, P. and Mulvihill, D. M. (2021) Sensitivity of material failure to surface roughness: a study on titanium alloys Ti64 and Ti407. Materials and Design, 200, 109438. (doi: 10.1016/j.matdes.2020.109438)
Sneddon, S., Mulvihill, D. M. , Wielewski, E. , Dixon, M., Rugg, D. and Li, P. (2021) Deformation and failure behaviour of a titanium alloy Ti-407 with reduced aluminium content: a comparison with Ti-6Al-4V in tension and compression. Materials Characterization, 172, 110901. (doi: 10.1016/j.matchar.2021.110901)
2020
Liu, G., Song, W. and Li, P. (2020) Compressive mechanical properties of metal fiber sintered sheets at different strain rates. Composite Structures, 233, 111703. (doi:10.1016/j.compstruct.2019.111703)
Wang, Z. and Li, P. (2020) Visco‐elasto‐plastic constitutive model of adhesives under uniaxial compression in a range of strain rates. Journal of Applied Polymer Science, (doi:10.1002/app.48962) (Early Online Publication)
Wang, Z. and Li, P. (2020) A model incorporating damage evolution to predict the penetration behaviour of a ceramic target subjected to the long projectile impact. International Journal of Impact Engineering, 135, 103393.(doi:10.1016/j.ijimpeng.2019.103393)
Wang, Z. and Li, P. (2020) Visco‐elasto‐plastic constitutive model of adhesives under uniaxial compression in a range of strain rates. Journal of Applied Polymer Science, (doi:10.1002/app.48962) (Early Online Publication)
Wang, Z. and Li, P. (2020) A model incorporating damage evolution to predict the penetration behaviour of a ceramic target subjected to the long projectile impact. International Journal of Impact Engineering, 135, 103393.(doi:10.1016/j.ijimpeng.2019.103393)
2019
Xiao, L., Song, W., Hu, M. and Li, P. (2019) Compressive properties and micro-structural characteristics of Ti–6Al–4V fabricated by electron beam melting and selective laser melting. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 764, 138204. (doi:10.1016/j.msea.2019.138204)
Huang, R., Li, P. , Liu, T. and Xu, J. (2019) The 3D failure process in polymeric syntactic foams with different cenosphere volume fractions. Journal of Applied Polymer Science, 136(19), 47491. (doi:10.1002/app.47491)
Liu, Z., Li, P. and Srikanth, N. (2019) Effect of delamination on the flexural response of [+45/−45/0]2s carbon fibre reinforced polymer laminates. Composite Structures, 209, pp. 93-102. (doi:10.1016/j.compstruct.2018.10.049)
Vasylkiv, O., Borodianska, H., Demirskyi, D., Li, P. , Suzuki, T.S., Grigoroscuta, M.A., Pasuk, I., Kuncser, A. and Badica, P. (2019) Bulks of Al-B-C obtained by reactively spark plasma sintering and impact properties by Split Hopkinson Pressure Bar.Scientific Reports, 9, 19484. (doi:10.1038/s41598-019-55888-z) (PMID:31863060) (PMCID:PMC6925236)
Huang, R., Li, P. , Liu, T. and Xu, J. (2019) The 3D failure process in polymeric syntactic foams with different cenosphere volume fractions. Journal of Applied Polymer Science, 136(19), 47491. (doi:10.1002/app.47491)
Liu, Z., Li, P. and Srikanth, N. (2019) Effect of delamination on the flexural response of [+45/−45/0]2s carbon fibre reinforced polymer laminates. Composite Structures, 209, pp. 93-102. (doi:10.1016/j.compstruct.2018.10.049)
Vasylkiv, O., Borodianska, H., Demirskyi, D., Li, P. , Suzuki, T.S., Grigoroscuta, M.A., Pasuk, I., Kuncser, A. and Badica, P. (2019) Bulks of Al-B-C obtained by reactively spark plasma sintering and impact properties by Split Hopkinson Pressure Bar.Scientific Reports, 9, 19484. (doi:10.1038/s41598-019-55888-z) (PMID:31863060) (PMCID:PMC6925236)
2018
Wang, Z., Li, P. and Song, W. (2018) Inelastic deformation micromechanism and modified fragmentation model for silicon carbide under dynamic compression. Materials and Design, 157, pp. 244-250. (doi:10.1016/j.matdes.2018.07.032)
Badica, P., Batalu, D., Burdusel, M., Grigoroscuta, M. A., Aldica, G. V., Enculescu, M., Gabor, R. A., Wang, Z., Huang, R. and Li, P. (2018) Compressive properties of pristine and SiC-Te-added MgB 2 powders, green compacts and spark-plasma-sintered bulks. Ceramics International, 44(9), pp. 10181-10191. (doi:10.1016/j.ceramint.2018.03.008)
Wang, Z. and Li, P. (2018) Characterisation and constitutive model of tensile properties of selective laser melted Ti-6Al-4V struts for microlattice structures.Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 725, pp. 350-358.(doi:10.1016/j.msea.2018.04.006)
Badica, P., Batalu, D., Burdusel, M., Grigoroscuta, M. A., Aldica, G. V., Enculescu, M., Gabor, R. A., Wang, Z., Huang, R. and Li, P. (2018) Compressive properties of pristine and SiC-Te-added MgB 2 powders, green compacts and spark-plasma-sintered bulks. Ceramics International, 44(9), pp. 10181-10191. (doi:10.1016/j.ceramint.2018.03.008)
Wang, Z. and Li, P. (2018) Characterisation and constitutive model of tensile properties of selective laser melted Ti-6Al-4V struts for microlattice structures.Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 725, pp. 350-358.(doi:10.1016/j.msea.2018.04.006)
2017
Wang, Z. and Li, P. (2017) Voronoi cell finite element modelling of the intergranular fracture mechanism in polycrystalline alumina. Ceramics International, 43(9), pp. 6967-6975. (doi:10.1016/j.ceramint.2017.02.121)
Ho, N. S. K., Li, P., Raghavan, S. and Li, T. (2017) The effect of slurry composition on the microstructure and mechanical properties of open-cell Inconel foams manufactured by the slurry coating technique. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 687, pp. 123-130. (doi:10.1016/j.msea.2017.01.038)
Ho, N. S. K., Li, P., Raghavan, S. and Li, T. (2017) The effect of slurry composition on the microstructure and mechanical properties of open-cell Inconel foams manufactured by the slurry coating technique. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 687, pp. 123-130. (doi:10.1016/j.msea.2017.01.038)
2016
Liu, Z., Li, P., Srikanth, N., Liu, T. and Chai, G. B. (2016) Quantification of flexural fatigue life and 3D damage in carbon fibre reinforced polymer laminates. Composites Part A: Applied Science and Manufacturing, 90, pp. 778-785.(doi:10.1016/j.compositesa.2016.09.008)
Huang, R., Li, P., Wang, Z. and Liu, T. (2016) X-ray microtomographic characterization and quantification of the strain rate dependent failure mechanism in cenosphere epoxy syntactic foams. Advanced Engineering Materials, 18(9), pp. 1550-1555.(doi:10.1002/adem.201600215)
Li, P. and Wang, Z. (2016) Experimental characterization and modified constitutive modeling of the strain rate dependent compressive behavior of adhesives. Macromolecular Materials and Engineering, 301(5), pp. 577-585. (doi:10.1002/mame.201500415)
Huang, R., Li, P. and Liu, T. (2016) X-ray microtomography and finite element modelling of compressive failure mechanism in cenosphere epoxy syntactic foams. Composite Structures, 140, pp. 157-165. (doi:10.1016/j.compstruct.2015.12.040)
Li, P., Nguyen, N. V. and Hao, H. (2016) Dynamic compressive behaviour of Mg foams manufactured by the direct foaming process. Materials and Design, 89, pp. 636-641. (doi:10.1016/j.matdes.2015.10.021)
Do, D. K. and Li, P. (2016) The effect of laser energy input on the microstructure, physical and mechanical properties of Ti-6Al-4V alloys by selective laser melting. Virtual and Physical Prototyping, 11(1), pp. 41-47. (doi:10.1080/17452759.2016.1142215)
Huang, R., Li, P., Wang, Z. and Liu, T. (2016) X-ray microtomographic characterization and quantification of the strain rate dependent failure mechanism in cenosphere epoxy syntactic foams. Advanced Engineering Materials, 18(9), pp. 1550-1555.(doi:10.1002/adem.201600215)
Li, P. and Wang, Z. (2016) Experimental characterization and modified constitutive modeling of the strain rate dependent compressive behavior of adhesives. Macromolecular Materials and Engineering, 301(5), pp. 577-585. (doi:10.1002/mame.201500415)
Huang, R., Li, P. and Liu, T. (2016) X-ray microtomography and finite element modelling of compressive failure mechanism in cenosphere epoxy syntactic foams. Composite Structures, 140, pp. 157-165. (doi:10.1016/j.compstruct.2015.12.040)
Li, P., Nguyen, N. V. and Hao, H. (2016) Dynamic compressive behaviour of Mg foams manufactured by the direct foaming process. Materials and Design, 89, pp. 636-641. (doi:10.1016/j.matdes.2015.10.021)
Do, D. K. and Li, P. (2016) The effect of laser energy input on the microstructure, physical and mechanical properties of Ti-6Al-4V alloys by selective laser melting. Virtual and Physical Prototyping, 11(1), pp. 41-47. (doi:10.1080/17452759.2016.1142215)
2015
Wang, Z. and Li, P. (2015) Dynamic failure and fracture mechanism in alumina ceramics: Experimental observations and finite element modelling. Ceramics International, 41(10 PtA), pp. 12763-12772. (doi:10.1016/j.ceramint.2015.06.110)
Wang, Z. and Li, P. (2015) Characterisation of dynamic behaviour of alumina ceramics: evaluation of stress uniformity. AIP Advances, 5(10), 107224. (doi:10.1063/1.4934793)
Huang, R. and Li, P. (2015) Elastic behaviour and failure mechanism in epoxy syntactic foams: the effect of glass microballoon volume fractions. Composites Part B: Engineering, 78, pp. 401-408. (doi:10.1016/j.compositesb.2015.04.002)
Li, P. (2015) Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 622, pp. 114-120.(doi:10.1016/j.msea.2014.11.028)
Liu, T., Huang, R. and Li, P. (2015) Cone-beam CT reconstruction along any orientation of interest. Journal of X-Ray Science and Technology, 23(6), pp. 773-782. (doi:10.3233/XST-150527) (PMID:26756412)
Wang, Z. and Li, P. (2015) Characterisation of dynamic behaviour of alumina ceramics: evaluation of stress uniformity. AIP Advances, 5(10), 107224. (doi:10.1063/1.4934793)
Huang, R. and Li, P. (2015) Elastic behaviour and failure mechanism in epoxy syntactic foams: the effect of glass microballoon volume fractions. Composites Part B: Engineering, 78, pp. 401-408. (doi:10.1016/j.compositesb.2015.04.002)
Li, P. (2015) Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 622, pp. 114-120.(doi:10.1016/j.msea.2014.11.028)
Liu, T., Huang, R. and Li, P. (2015) Cone-beam CT reconstruction along any orientation of interest. Journal of X-Ray Science and Technology, 23(6), pp. 773-782. (doi:10.3233/XST-150527) (PMID:26756412)
2014
Li, P., Wang, Z., Petrinic, N. and Siviour, C.R. (2014) Deformation behaviour of stainless steel microlattice structures by selective laser melting. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 614, pp. 116-121. (doi:10.1016/j.msea.2014.07.015)
Huang, Y., Wei, C., Chen, L. and Li, P. (2014) Quantitative correlation between geometric parameters and stress concentration of corrosion pits. Engineering Failure Analysis, 44, pp. 168-178. (doi:10.1016/j.engfailanal.2014.05.020)
Badica, P., Grasso, S., Borodianska, H., Xie, S. S., Li, P., Tatarko, P., Reece, M. J., Sakka, Y. and Vasylkiv, O. (2014) Tough and dense boron carbide obtained by high-pressure (300 MPa) and low-temperature (1600°C) spark plasma sintering. Journal of the Ceramic Society of Japan, 122(1424), pp. 271-275. (doi:10.2109/jcersj2.122.271)
Badica, P., Borodianska, H., Xie, S., Zhao, T., Demirskyi, D., Li, P., Tok, A. I.Y., Sakka, Y. and Vasylkiv, O. (2014) Toughness control of boron carbide obtained by spark plasma sintering in nitrogen atmosphere. Ceramics International, 40(2), pp. 3053-3061.(doi:10.1016/j.ceramint.2013.09.141)
Song, X., Fong, K.S., Oon, S.R., Tiong, W.R., Li, P.F., Korsunsky, A. M. and Danno, A. (2014) Diametrical growth in the forward flow forming process: simulation, validation, and prediction. International Journal of Advanced Manufacturing Technology, 71(1-4), pp. 207-217. (doi:10.1007/s00170-013-5492-x)
Huang, Y., Wei, C., Chen, L. and Li, P. (2014) Quantitative correlation between geometric parameters and stress concentration of corrosion pits. Engineering Failure Analysis, 44, pp. 168-178. (doi:10.1016/j.engfailanal.2014.05.020)
Badica, P., Grasso, S., Borodianska, H., Xie, S. S., Li, P., Tatarko, P., Reece, M. J., Sakka, Y. and Vasylkiv, O. (2014) Tough and dense boron carbide obtained by high-pressure (300 MPa) and low-temperature (1600°C) spark plasma sintering. Journal of the Ceramic Society of Japan, 122(1424), pp. 271-275. (doi:10.2109/jcersj2.122.271)
Badica, P., Borodianska, H., Xie, S., Zhao, T., Demirskyi, D., Li, P., Tok, A. I.Y., Sakka, Y. and Vasylkiv, O. (2014) Toughness control of boron carbide obtained by spark plasma sintering in nitrogen atmosphere. Ceramics International, 40(2), pp. 3053-3061.(doi:10.1016/j.ceramint.2013.09.141)
Song, X., Fong, K.S., Oon, S.R., Tiong, W.R., Li, P.F., Korsunsky, A. M. and Danno, A. (2014) Diametrical growth in the forward flow forming process: simulation, validation, and prediction. International Journal of Advanced Manufacturing Technology, 71(1-4), pp. 207-217. (doi:10.1007/s00170-013-5492-x)
2011
Li, P., Petrinic, N. and Siviour, C.R. (2011) Quantification of impact energy dissipation capacity in metallic thin-walled hollow sphere foams using high speed photography. Journal of Applied Physics, 110(8), 083516. (doi:10.1063/1.3647769)
Publications by other group authors
All | D. Barbera | S. Bin Jaber | I. Campbell | D. K. Do | M. Docherty | A. Feeney | M. Fotouhi | S. Fotouhi | E. Frutos-Myro | P. Grassl | E. Grustan-Gutiérrez | A. Hamilton | P. Harrison | S. Kumar | J. Lee | S. Liu | Y. Liu | A. McBride | G. Min | D. Mulvihill | J. Perris | J. Schneider | S. Sneddon | A. Tabatabaeian | C. Triantafyllou | C. Unluer | E. Wielewski | R. Williams | L. Yusuf
All | D. Barbera | S. Bin Jaber | I. Campbell | D. K. Do | M. Docherty | A. Feeney | M. Fotouhi | S. Fotouhi | E. Frutos-Myro | P. Grassl | E. Grustan-Gutiérrez | A. Hamilton | P. Harrison | S. Kumar | J. Lee | S. Liu | Y. Liu | A. McBride | G. Min | D. Mulvihill | J. Perris | J. Schneider | S. Sneddon | A. Tabatabaeian | C. Triantafyllou | C. Unluer | E. Wielewski | R. Williams | L. Yusuf