Publications by Mohammad Fotouhi
Navigate to year: 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010
2022
Tabatabaeian, A., Ghasemi, A. R., Shokrieh, M. M., Marzbanrad, B., Baraheni, M. and Fotouhi, M. (2022) Residual stress in engineering materials: a review. Advanced Engineering Materials, 24(3), 2100786. (doi: 10.1002/adem.202100786)
2021
Cormack, J., Fotouhi, M. , Adams, G. and Pipe, T. (2021) Comparison of Concentrated and Distributed Compliant Elements in a 3D Printed Gripper. In: Towards Autonomous Robotic Systems (TAROS 2021), Lincoln, United Kingdom, 08-10 Sep 2021, pp. 193-197. ISBN 9783030891763 (doi: 10.1007/978-3-030-89177-0_20)
Fotouhi, S. , Khayatzadeh, S., Pui, W. X., Damghani, M. and Fotouhi, M. (2021) Detection of barely visible impact damage in polymeric laminated composites using a biomimetic tactile whisker. Polymers, 13(20), 3587. (doi: 10.3390/polym13203587)(PMCID:PMC8536986)
Ahmadi, M., Fotouhi, M. , Hosseini-Toudeshky, H. and Sadighi, M. (2021) Damage behavior analysis of Al/TiC particulate composite by acoustic emission monitoring and peridynamic modeling. Composites Part C: Open Access, 6, 100206. (doi: 10.1016/j.jcomc.2021.100206)
Cormack, J., Fotouhi, M. , Adams, G. and Pipe, T. (2021) Automated extraction of 3D printed parts from unfused PA12 powder using a one-shot 3D printed compliant gripper. IEEE Robotics and Automation Letters, 6(4), pp. 8655-8662. (doi: 10.1109/LRA.2021.3113383)
Kazemi, M.E., Bodaghi, M., Shanmugam, L., Fotouhi, M. , Yang, L., Zhang, W. and Yang, J. (2021) Developing thermoplastic hybrid titanium composite laminates (HTCLS) at room temperature: low-velocity impact analyses. Composites Part A: Applied Science and Manufacturing, 149, 106552. (doi: 10.1016/j.compositesa.2021.106552)
Idarraga, G., Jalalvand, M., Fotouhi, M. , Meza, J. and Wisnom, M. R. (2021) Gradual failure in high-performance unidirectional thin-ply carbon/glass hybrid composites under bending. Composite Structures, 271, 114128. (doi: 10.1016/j.compstruct.2021.114128)
Ali, H. T., Alghtani, A. H., Felemban, B. F., Abd El-Aziz, K., Saber, D., Ahmed, E. M., Megahed, M. and Fotouhi, M. (2021) Multivariable analysis for selection of natural fibers as fillers for a sustainable food packaging industry. Materials Research Express, 8(9), 095504. (doi: 10.1088/2053-1591/ac17a9)
Fotouhi, S., Khoshravan Azar, M.R. and Fotouhi, M. (2021) Achieving robust acoustic emission-based damage characterisation of scaled laminated composites under indentation. eXPRESS Polymer Letters, 15(9), pp. 839-852. (doi: 10.3144/expresspolymlett.2021.67)
Fotouhi, S., Pashmforoush, F., Bodaghi, M. and Fotouhi, M. (2021) Autonomous damage recognition in visual inspection of laminated composite structures using deep learning. Composite Structures, 268, 113960. (doi: 10.1016/j.compstruct.2021.113960)
Fotouhi, S., Tabatabaeian, A., Zuo, S., Liu, S., Heidari, H. and Fotouhi, M. (2021) Application of Electrical Resistance Change Method for Impact Damage Monitoring in Quasi-isotropic Hybrid Composites. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021.
Ali, H. T., Akrami, R., Fotouhi, S., Bodaghi, M., Saeedifar, M., Yusuff, M. and Fotouhi, M. (2021) Fiber reinforced polymer composites in bridge industry. Structures, 30, pp. 774-785. (doi: 10.1016/j.istruc.2020.12.092)
Tabatabaeian, A., Fotouhi, M. and Harrison, P. (2021) Design, Analysis and Manufacturing of a Smart Composite Skateboard with Self-sensing Capability. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021.
Delbariani-Nejad, A., Farrokhabadi, A., Haddad Khodaparast, H. and Fotouhi, M. (2021) Finite Element Reliability Analysis of Edge Delamination Onset Due to the Interlaminar Stresses in General Composite Laminates. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021. (Accepted for Publication)
Fotouhi, M. , Pui, W. X., Fotouhi, S., Jalalvand, M. and Wisnom, M. R. (2021) Detection of Barely Visible Impact Damage Using a Smart Hybrid Composite Surface Layer. In: Twenty-Third International Conference on Composite Materials (ICCM23), Belfast, Northern Ireland, 30 Jul - 4 Aug 2023, (Accepted for Publication)
Cormack, J., Fotouhi, M. , Adams, G. and Pipe, A. (2021) One-shot 3D Printed Underactuated Gripper. In: 21st Towards Autonomous Robotic Systems Conference, Nottingham, UK, 16 Sep 2020, pp. 400-404. ISBN 9783030634858 (doi: 10.1007/978-3-030-63486-5_41)
de Castro, B. D., Fotouhi, M. , Vieira, L. M. G., de Faria, P. E. and Campos Rubio, J. C. (2021) Mechanical behaviour of a green composite from biopolymers reinforced with sisal fibres. Journal of Polymers and the Environment, 29(2), pp. 429-440. (doi: 10.1007/s10924-020-01875-9)
Akrami, R., Anjum, S., Fotouhi, S., Boaretto, J., Vannucchi de Camargo, F. and Fotouhi, M. (2021) Investigating the effect of interface morphology in adhesively bonded composite wavy-lap joints. Journal of Composites Science, 5(1), 32. (doi: 10.3390/jcs5010032)
Boaretto, J., Fotouhi, M. , Tende, E., Aver, G. F., Marcon, V. R. R., Cordeiro, G. L., Bergmann, C. P. and Vannucchi de Camargo, F. (2021) Biomimetics and composite materials toward efficient mobility: a review. Journal of Composites Science, 5, 22. (doi: 10.3390/jcs5010022)
Fotouhi, S. , Khayatzadeh, S., Pui, W. X., Damghani, M. and Fotouhi, M. (2021) Detection of barely visible impact damage in polymeric laminated composites using a biomimetic tactile whisker. Polymers, 13(20), 3587. (doi: 10.3390/polym13203587)(PMCID:PMC8536986)
Ahmadi, M., Fotouhi, M. , Hosseini-Toudeshky, H. and Sadighi, M. (2021) Damage behavior analysis of Al/TiC particulate composite by acoustic emission monitoring and peridynamic modeling. Composites Part C: Open Access, 6, 100206. (doi: 10.1016/j.jcomc.2021.100206)
Cormack, J., Fotouhi, M. , Adams, G. and Pipe, T. (2021) Automated extraction of 3D printed parts from unfused PA12 powder using a one-shot 3D printed compliant gripper. IEEE Robotics and Automation Letters, 6(4), pp. 8655-8662. (doi: 10.1109/LRA.2021.3113383)
Kazemi, M.E., Bodaghi, M., Shanmugam, L., Fotouhi, M. , Yang, L., Zhang, W. and Yang, J. (2021) Developing thermoplastic hybrid titanium composite laminates (HTCLS) at room temperature: low-velocity impact analyses. Composites Part A: Applied Science and Manufacturing, 149, 106552. (doi: 10.1016/j.compositesa.2021.106552)
Idarraga, G., Jalalvand, M., Fotouhi, M. , Meza, J. and Wisnom, M. R. (2021) Gradual failure in high-performance unidirectional thin-ply carbon/glass hybrid composites under bending. Composite Structures, 271, 114128. (doi: 10.1016/j.compstruct.2021.114128)
Ali, H. T., Alghtani, A. H., Felemban, B. F., Abd El-Aziz, K., Saber, D., Ahmed, E. M., Megahed, M. and Fotouhi, M. (2021) Multivariable analysis for selection of natural fibers as fillers for a sustainable food packaging industry. Materials Research Express, 8(9), 095504. (doi: 10.1088/2053-1591/ac17a9)
Fotouhi, S., Khoshravan Azar, M.R. and Fotouhi, M. (2021) Achieving robust acoustic emission-based damage characterisation of scaled laminated composites under indentation. eXPRESS Polymer Letters, 15(9), pp. 839-852. (doi: 10.3144/expresspolymlett.2021.67)
Fotouhi, S., Pashmforoush, F., Bodaghi, M. and Fotouhi, M. (2021) Autonomous damage recognition in visual inspection of laminated composite structures using deep learning. Composite Structures, 268, 113960. (doi: 10.1016/j.compstruct.2021.113960)
Fotouhi, S., Tabatabaeian, A., Zuo, S., Liu, S., Heidari, H. and Fotouhi, M. (2021) Application of Electrical Resistance Change Method for Impact Damage Monitoring in Quasi-isotropic Hybrid Composites. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021.
Ali, H. T., Akrami, R., Fotouhi, S., Bodaghi, M., Saeedifar, M., Yusuff, M. and Fotouhi, M. (2021) Fiber reinforced polymer composites in bridge industry. Structures, 30, pp. 774-785. (doi: 10.1016/j.istruc.2020.12.092)
Tabatabaeian, A., Fotouhi, M. and Harrison, P. (2021) Design, Analysis and Manufacturing of a Smart Composite Skateboard with Self-sensing Capability. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021.
Delbariani-Nejad, A., Farrokhabadi, A., Haddad Khodaparast, H. and Fotouhi, M. (2021) Finite Element Reliability Analysis of Edge Delamination Onset Due to the Interlaminar Stresses in General Composite Laminates. 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal, 1-3 Sept 2021. (Accepted for Publication)
Fotouhi, M. , Pui, W. X., Fotouhi, S., Jalalvand, M. and Wisnom, M. R. (2021) Detection of Barely Visible Impact Damage Using a Smart Hybrid Composite Surface Layer. In: Twenty-Third International Conference on Composite Materials (ICCM23), Belfast, Northern Ireland, 30 Jul - 4 Aug 2023, (Accepted for Publication)
Cormack, J., Fotouhi, M. , Adams, G. and Pipe, A. (2021) One-shot 3D Printed Underactuated Gripper. In: 21st Towards Autonomous Robotic Systems Conference, Nottingham, UK, 16 Sep 2020, pp. 400-404. ISBN 9783030634858 (doi: 10.1007/978-3-030-63486-5_41)
de Castro, B. D., Fotouhi, M. , Vieira, L. M. G., de Faria, P. E. and Campos Rubio, J. C. (2021) Mechanical behaviour of a green composite from biopolymers reinforced with sisal fibres. Journal of Polymers and the Environment, 29(2), pp. 429-440. (doi: 10.1007/s10924-020-01875-9)
Akrami, R., Anjum, S., Fotouhi, S., Boaretto, J., Vannucchi de Camargo, F. and Fotouhi, M. (2021) Investigating the effect of interface morphology in adhesively bonded composite wavy-lap joints. Journal of Composites Science, 5(1), 32. (doi: 10.3390/jcs5010032)
Boaretto, J., Fotouhi, M. , Tende, E., Aver, G. F., Marcon, V. R. R., Cordeiro, G. L., Bergmann, C. P. and Vannucchi de Camargo, F. (2021) Biomimetics and composite materials toward efficient mobility: a review. Journal of Composites Science, 5, 22. (doi: 10.3390/jcs5010022)
2020
Ali, H. T., Akrami, R., Fotouhi, S., Bodaghi, M., Saeedifar, M., Yusuff, M. and Fotouhi, M. (2020) Fiber reinforced polymer composites in bridge industry: a review. Structures, (Accepted for Publication)
Fotouhi, S., Khoshravan Azar, M. R. and Fotouhi, M. (2020) Damage Characterization of Scaled Laminated Composites under Indentation by Acoustic Emission. ICCS24 - 24th International Conference on Composite Structures, Porto, Portugal, 14-18 Jun 2021. (Accepted for Publication)
de Castro, B. D., Fotouhi, M. , Vieira, L. M. G., de Faria, P. E. and Campos Rubio, J. C. (2020) Mechanical behaviour of a green composite from biopolymers reinforced with sisal fibres. Journal of Polymers and the Environment, (doi: 10.1007/s10924-020-01875-9) (Early Online Publication)
Pozegic, T. R., Fotouhi, M. , Wu, X., Hartley, J. W., Wisnom, M. R. and Hamerton, I. (2020) Pseudo-ductile behaviour in fibre reinforced thermoplastic angle-ply composites. Composites Science and Technology, 197, 108261. (doi: 10.1016/j.compscitech.2020.108261)
Fotouhi, M. , Jalalvand, M., Saeedifar, M., Xiao, B. and Wisnom, M. R. (2020) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour loaded off-axis. Composite Structures, 247, 112444.
Fotouhi, M. , Damghani, M., Leong, M. C., Fotouhi, S., Jalalvand, M. and Wisnom, M. R. (2020) A comparative study on glass and carbon fibre reinforced laminated composites in scaled quasi-static indentation tests. Composite Structures, 245, 112327. (doi: 10.1016/j.compstruct.2020.112327)
Amir, B., Fotouhi, M. and William, M. (2020) A new design for friction stir spot joining of Al alloys and carbon fibre reinforced composites. Journal of Materials Engineering and Performance, 29, pp. 4913-4921. (doi: 10.1007/s11665-020-04998-1)
Fotouhi, M. , Abazari, A.-M., Ajaj, A. M., Akrami, R., Fotouhi, S. and Ali, H. T. (2020) Topology Optimisation of a Wing Box Rib Using Ansys. 28th Annual International Conference of the Iranian Society of Mechanical Engineers (ISME2020), Tehran, Iran, 27-29 May 2020.
Bodaghi, M., Serjouei, A., Zolfagharian, A., Fotouhi, M. , Hafizur, R. and Durand, D. (2020) Reversible energy absorbing meta-sandwiches by 4D FDM printing. International Journal of Mechanical Sciences, 173, 105451. (doi: 10.1016/j.ijmecsci.2020.105451)
Noroozi, R., Bodaghi, M., Jafari, H., Zolfagharian, A. and Fotouhi, M. (2020) Shape-adaptive metastructures with variable bandgap regions by 4D printing. Polymers, 12(3), 519. (doi: 10.3390/polym12030519)
Ali, H. T., Fotouhi, S., Akrami, R., Pashmforoush, F., Pavlovic, A. and Fotouhi, M. (2020) Effect of ply thickness on damage mechanisms of composite laminates under repeated loading. FME Transactions, 48(2), pp. 287-293. (doi: 10.5937/fme2002287T)
Abazari, A. M., Fotouhi, M. , Tavakkoli, H. and Rezazadeh, G. (2020) An experimental study for characterization of size-dependence in microstructures via electrostatic pull-in instability technique. Applied Physics Letters, 116, 244102. (doi: 10.1063/5.0011335)
Ali, H. T., Akrami, R., Fotouhi, S., Pashmforoush, F., Fragassa, C. and Fotouhi, M. (2020) Effect of the stacking sequence on the impact response of carbon-glass/epoxy hybrid composites. Facta Universitatis, Series: Mechanical Engineering, 18(1), pp. 69-77.(doi: 10.22190/FUME191119010A)
Fotouhi, S., Khoshravan Azar, M. R. and Fotouhi, M. (2020) Damage Characterization of Scaled Laminated Composites under Indentation by Acoustic Emission. ICCS24 - 24th International Conference on Composite Structures, Porto, Portugal, 14-18 Jun 2021. (Accepted for Publication)
de Castro, B. D., Fotouhi, M. , Vieira, L. M. G., de Faria, P. E. and Campos Rubio, J. C. (2020) Mechanical behaviour of a green composite from biopolymers reinforced with sisal fibres. Journal of Polymers and the Environment, (doi: 10.1007/s10924-020-01875-9) (Early Online Publication)
Pozegic, T. R., Fotouhi, M. , Wu, X., Hartley, J. W., Wisnom, M. R. and Hamerton, I. (2020) Pseudo-ductile behaviour in fibre reinforced thermoplastic angle-ply composites. Composites Science and Technology, 197, 108261. (doi: 10.1016/j.compscitech.2020.108261)
Fotouhi, M. , Jalalvand, M., Saeedifar, M., Xiao, B. and Wisnom, M. R. (2020) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour loaded off-axis. Composite Structures, 247, 112444.
Fotouhi, M. , Damghani, M., Leong, M. C., Fotouhi, S., Jalalvand, M. and Wisnom, M. R. (2020) A comparative study on glass and carbon fibre reinforced laminated composites in scaled quasi-static indentation tests. Composite Structures, 245, 112327. (doi: 10.1016/j.compstruct.2020.112327)
Amir, B., Fotouhi, M. and William, M. (2020) A new design for friction stir spot joining of Al alloys and carbon fibre reinforced composites. Journal of Materials Engineering and Performance, 29, pp. 4913-4921. (doi: 10.1007/s11665-020-04998-1)
Fotouhi, M. , Abazari, A.-M., Ajaj, A. M., Akrami, R., Fotouhi, S. and Ali, H. T. (2020) Topology Optimisation of a Wing Box Rib Using Ansys. 28th Annual International Conference of the Iranian Society of Mechanical Engineers (ISME2020), Tehran, Iran, 27-29 May 2020.
Bodaghi, M., Serjouei, A., Zolfagharian, A., Fotouhi, M. , Hafizur, R. and Durand, D. (2020) Reversible energy absorbing meta-sandwiches by 4D FDM printing. International Journal of Mechanical Sciences, 173, 105451. (doi: 10.1016/j.ijmecsci.2020.105451)
Noroozi, R., Bodaghi, M., Jafari, H., Zolfagharian, A. and Fotouhi, M. (2020) Shape-adaptive metastructures with variable bandgap regions by 4D printing. Polymers, 12(3), 519. (doi: 10.3390/polym12030519)
Ali, H. T., Fotouhi, S., Akrami, R., Pashmforoush, F., Pavlovic, A. and Fotouhi, M. (2020) Effect of ply thickness on damage mechanisms of composite laminates under repeated loading. FME Transactions, 48(2), pp. 287-293. (doi: 10.5937/fme2002287T)
Abazari, A. M., Fotouhi, M. , Tavakkoli, H. and Rezazadeh, G. (2020) An experimental study for characterization of size-dependence in microstructures via electrostatic pull-in instability technique. Applied Physics Letters, 116, 244102. (doi: 10.1063/5.0011335)
Ali, H. T., Akrami, R., Fotouhi, S., Pashmforoush, F., Fragassa, C. and Fotouhi, M. (2020) Effect of the stacking sequence on the impact response of carbon-glass/epoxy hybrid composites. Facta Universitatis, Series: Mechanical Engineering, 18(1), pp. 69-77.(doi: 10.22190/FUME191119010A)
2019
Akrami, R., Fotouhi, S., Fotouhi, M. , Bodaghi, M., Clamp, J. and Bolouri, A. (2019) High-performance bio-inspired composite T-joints. Composites Science and Technology, 184, 107840. (doi: 10.1016/j.compscitech.2019.107840)
Fotouhi, S., Clamp, J., Bolouri, A., Pozegic, T. R. and Fotouhi, M. (2019) Investigating polyethersulfone interleaved glass/carbon hybrid composite under impact and its comparison with GLARE. Composite Structures, 226, 111268. (doi: 10.1016/j.compstruct.2019.111268)
Suresh Kumar, C., Fotouhi, M. , Saeedifar, M. and Arumugam, V. (2019) Acoustic emission based investigation on the effect of temperature and hybridization on drop weight impact and post-impact residual strength of hemp and basalt fibres reinforced polymer composite laminates. Composites Part B: Engineering, 173, 106962. (doi: 10.1016/j.compositesb.2019.106962)
Suwarta, P., Fotouhi, M. , Czél, G., Longana, M. and Wisnom, M. R. (2019) Fatigue behaviour of pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites. Composite Structures, 224, 110996. (doi: 10.1016/j.compstruct.2019.110996)
Fotouhi, M. , Suwarta, P., Jenkin, R., Jalalvand, M. and Wisnom, M.R. (2019) Fatigue Behaviour of Un-Notched and Open-Hole Quasi-Isotropic Pseudo-Ductile Thin-Ply Carbon/Glass Hybrid Laminates. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Fotouhi, S., Akrami, R., Ferreira‐Green, K., Naser, M. G. A., Fotouhi, M. and Fragassa, C. (2019) Piezoelectric PVDF Sensor as a Reliable Device for Strain/Load Monitoring of Engineering Structures. 9th International Scientific Conference - Research and Development of Mechanical Elements and Systems (IRMES 2019), Kragujevac, Serbia, 5-7 Sept 2019.
Idarraga, G., Fotouhi, M. , Jalalvand, M., Meza, J. and Wisnom, M.R. (2019) Investigation of the Hybrid Effect in High Performance Quasi-Isotropic Thin-Ply Carbon/Glass Composite Under Tension. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Jalalvand, M., Idarraga, G., Fotouhi, M. , Meza, J. and Wisnom, M.R. (2019) Achieving Gradual Failure in Hybrid Composite Laminates-Progressing from Tension to Bending. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Bolouri, A., Moseley, W. and Fotouhi, M. (2019) Effects of Pin Design on Materials Interactions to Friction Stir Spot Joining Aluminium Alloys to Carbon Fibre Reinforced Plastics. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2019), Stockholm, Sweden, 1-5 Sept 2019.
Fotouhi, S., Clamp, J., Bolouri, A. and Fotouhi, M. (2019) Polyether Sulfone Interleaved Glass/Carbon Hybrid Composite Under Impact Loading. 9th International Conference on Composite Testing and Model Identification (CompTest 2019), Luleå, Sweden, 27-29 May 2019.
Fotouhi, M. , Fuller, J., Longana, M., Jalalvand, M. and Wisnom, M. R. (2019) The high strain rate tension behaviour of pseudo-ductile high performance thin ply composites. Composite Structures, 215, pp. 365-376. (doi: 10.1016/j.compstruct.2019.02.068)
Bodaghi, M., Noroozi, R., Zolfagharian, A., Fotouhi, M. and Norouzi, S. (2019) 4D printing self-morphing structures. Materials, 12(8), 1353. (doi: 10.3390/ma12081353) (PMID:31027212) (PMCID:PMC6515691)
Sahmani, S., Fotouhi, M. and Aghdam, M. M. (2019) Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells. Acta Mechanica, 230(3), pp. 1077-1103. (doi: 10.1007/s00707-018-2334-9)
Fotouhi, M. , Fragassa, C., Fotouhi, S., Saghafi, H. and Minak, G. (2019) Damage characterization of nano-interleaved CFRP under static and fatigue loading. Fibers, 7(2), 13. (doi: 10.3390/fib7020013)
Pozegic, T.R., King, S.G., Fotouhi, M. , Stolojan, V., Silva, S.R.P. and Hamerton, I. (2019) Delivering interlaminar reinforcement in composites through electrospun nanofibres. Advanced Manufacturing: Polymer and Composites Science, 5(4), pp. 155-171.(doi: 10.1080/20550340.2019.1665226)
Fotouhi, S., Clamp, J., Bolouri, A., Pozegic, T. R. and Fotouhi, M. (2019) Investigating polyethersulfone interleaved glass/carbon hybrid composite under impact and its comparison with GLARE. Composite Structures, 226, 111268. (doi: 10.1016/j.compstruct.2019.111268)
Suresh Kumar, C., Fotouhi, M. , Saeedifar, M. and Arumugam, V. (2019) Acoustic emission based investigation on the effect of temperature and hybridization on drop weight impact and post-impact residual strength of hemp and basalt fibres reinforced polymer composite laminates. Composites Part B: Engineering, 173, 106962. (doi: 10.1016/j.compositesb.2019.106962)
Suwarta, P., Fotouhi, M. , Czél, G., Longana, M. and Wisnom, M. R. (2019) Fatigue behaviour of pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites. Composite Structures, 224, 110996. (doi: 10.1016/j.compstruct.2019.110996)
Fotouhi, M. , Suwarta, P., Jenkin, R., Jalalvand, M. and Wisnom, M.R. (2019) Fatigue Behaviour of Un-Notched and Open-Hole Quasi-Isotropic Pseudo-Ductile Thin-Ply Carbon/Glass Hybrid Laminates. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Fotouhi, S., Akrami, R., Ferreira‐Green, K., Naser, M. G. A., Fotouhi, M. and Fragassa, C. (2019) Piezoelectric PVDF Sensor as a Reliable Device for Strain/Load Monitoring of Engineering Structures. 9th International Scientific Conference - Research and Development of Mechanical Elements and Systems (IRMES 2019), Kragujevac, Serbia, 5-7 Sept 2019.
Idarraga, G., Fotouhi, M. , Jalalvand, M., Meza, J. and Wisnom, M.R. (2019) Investigation of the Hybrid Effect in High Performance Quasi-Isotropic Thin-Ply Carbon/Glass Composite Under Tension. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Jalalvand, M., Idarraga, G., Fotouhi, M. , Meza, J. and Wisnom, M.R. (2019) Achieving Gradual Failure in Hybrid Composite Laminates-Progressing from Tension to Bending. 22nd International Conference on Composite Materials 2019 (ICCM 22), Melbourne, Australia, 11-16 Aug 2019.
Bolouri, A., Moseley, W. and Fotouhi, M. (2019) Effects of Pin Design on Materials Interactions to Friction Stir Spot Joining Aluminium Alloys to Carbon Fibre Reinforced Plastics. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2019), Stockholm, Sweden, 1-5 Sept 2019.
Fotouhi, S., Clamp, J., Bolouri, A. and Fotouhi, M. (2019) Polyether Sulfone Interleaved Glass/Carbon Hybrid Composite Under Impact Loading. 9th International Conference on Composite Testing and Model Identification (CompTest 2019), Luleå, Sweden, 27-29 May 2019.
Fotouhi, M. , Fuller, J., Longana, M., Jalalvand, M. and Wisnom, M. R. (2019) The high strain rate tension behaviour of pseudo-ductile high performance thin ply composites. Composite Structures, 215, pp. 365-376. (doi: 10.1016/j.compstruct.2019.02.068)
Bodaghi, M., Noroozi, R., Zolfagharian, A., Fotouhi, M. and Norouzi, S. (2019) 4D printing self-morphing structures. Materials, 12(8), 1353. (doi: 10.3390/ma12081353) (PMID:31027212) (PMCID:PMC6515691)
Sahmani, S., Fotouhi, M. and Aghdam, M. M. (2019) Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells. Acta Mechanica, 230(3), pp. 1077-1103. (doi: 10.1007/s00707-018-2334-9)
Fotouhi, M. , Fragassa, C., Fotouhi, S., Saghafi, H. and Minak, G. (2019) Damage characterization of nano-interleaved CFRP under static and fatigue loading. Fibers, 7(2), 13. (doi: 10.3390/fib7020013)
Pozegic, T.R., King, S.G., Fotouhi, M. , Stolojan, V., Silva, S.R.P. and Hamerton, I. (2019) Delivering interlaminar reinforcement in composites through electrospun nanofibres. Advanced Manufacturing: Polymer and Composites Science, 5(4), pp. 155-171.(doi: 10.1080/20550340.2019.1665226)
2018
Fotouhi, S., Fotouhi, M. , Pavlovic, A. and Djordjevic, N. (2018) Investigating the pre-damaged PZT sensors under impact traction. Journal of Marine Science and Engineering, 6(4), 142. (doi: 10.3390/jmse6040142)
Saghafi, H., Fotouhi, M. and Minak, G. (2018) Improvement of the impact properties of composite laminates by means of nano-modification of the matrix—a review. Applied Sciences, 8(12), 2406. (doi: 10.3390/app8122406)
Suwarta, P., Czel, G., Fotouhi, M. , Rucerz, J. and Wisnom, M. R. (2018) Pseudo-ductility of Unidirectional Thin Ply Hybrid Composites in Longitudinal Compression. In: 33rd Technical Conference of the American Society for Composites, Seattle, WA, USA, 24-27 Sept 2018, pp. 1032-1041. ISBN 9781510872073
Fotouhi, M. , Jalalvand, M., Wu, X. and Wisnom, M.R. (2018) Bearing and Bypass Bearing of Pseudo-ductile Thin-ply Carbon/Glass Hybrids. 21st International Conference on Composite Structures (ICCS21), Bologna, Italy, 4-7 Sept 2018.
Fotouhi, M. , Jalalvand, M., Wu, X. and Wisnom, M.R. (2018) Compact Tension Test Behaviour of Pseudo-ductile Thin-ply Carbon/Glass Hybrids. 21st International Conference on Composite Structures (ICCS21), Bologna, Italy, 4-7 Sept 2018.
Fotouhi, M. , Jalalvand, M. and Wisnom, M. R. (2018) Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates. Composites Part A: Applied Science and Manufacturing, 110, pp. 29-44. (doi: 10.1016/j.compositesa.2018.04.012)
Sobhani, A., Saeedifar, M., Najafabadi, M. A., Fotouhi, M. and Zarouchas, D. (2018) The study of buckling and post-buckling behavior of laminated composites consisting multiple delaminations using acoustic emission. Thin-Walled Structures, 127, pp. 145-156. (doi: 10.1016/j.tws.2018.02.011)
Bolouri, A. and Fotouhi, M. (2018) High-performance Composite T-joints: Topological Design Strategy Towards Strength Improvement and Weight Reduction. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
De, M., Pozegic, T., Hamerton, I. and Fotouhi, M. (2018) Development and Evaluation of a Novel Piezoelectric PVDF Sensor as a Load Spectrum Counter. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Fotouhi, M. , Jalalvand, M., Prato, A. and Wisnom, M. R. (2018) Thin Ply Carbon/ Glass Hybrid Laminates to Activate New Damage Mechanisms Under Indentation. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Jalalvand, M., Wu, H. W. M. L., Sheibanian, F., Fotouhi, M. and Wisnom, M. R. (2018) Self-warning Hybrid Composite Patches for Repairing Cracked Aluminium Panels. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Wisnom, M. R., Czél, G., Fotouhi, M. , Fuller, J., Jalalvand, M., Rev, T. and Wu, X. (2018) Reduced Notch-Sensitivity in Pseudo-Ductile Thin-Ply Composites. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Wu, X., Fuller, J.D., Fotouhi, M. and Wisnom, M. (2018) Bearing Failure of Pseudo-ductile Thin Ply Angle-ply Laminates. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Saeedifar, M., Ahmadi Najafabadi, M., Mohammadi, K., Fotouhi, M. , Hosseini Toudeshky, H. and Mohammadi, R. (2018) Acoustic emission-based methodology to evaluate delamination crack growth under quasi-static and fatigue loading conditions.Journal of Nondestructive Evaluation, 37(1), 1. (doi: 10.1007/s10921-017-0454-0)
Pashmforoush, F., Fotouhi, M. and Sarhan, A. A. D. (2018) Experimental–numerical study on minimizing impact induced damage in laminated composites under low-velocity impact. Journal of Reinforced Plastics and Composites, 37(3), pp. 155-165. (doi: 10.1177/0731684417737166)
Czél, G., Rev, T., Jalalvand, M., Fotouhi, M. , Longana, M. L., Nixon-Pearson, O. J. and Wisnom, M. R. (2018) Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon/epoxy thin-ply hybrid composites. Composites Part A: Applied Science and Manufacturing, 104, pp. 151-164. (doi: 10.1016/j.compositesa.2017.10.028)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M. (2018) Acoustic emission monitoring of thin ply hybrid composites under repeated quasi-static tensile loading. FME Transactions, 46, pp. 238-244. (doi: 10.5937/fmet1802238F)
Sadeghi, S., Karimi, Z., Fotouhi, M. , Hasani, M., Najafabadi, M. A. and Pavlović, A. (2018) Residual stress evaluation in friction stir welding of aluminium plates by means of acoustic emission and ultrasonic waves. FME Transactions, 46, pp. 230-237. (doi: 10.5937/fmet1802230S)
Saghafi, H., Fotouhi, M. and Minak, G. (2018) Improvement of the impact properties of composite laminates by means of nano-modification of the matrix—a review. Applied Sciences, 8(12), 2406. (doi: 10.3390/app8122406)
Suwarta, P., Czel, G., Fotouhi, M. , Rucerz, J. and Wisnom, M. R. (2018) Pseudo-ductility of Unidirectional Thin Ply Hybrid Composites in Longitudinal Compression. In: 33rd Technical Conference of the American Society for Composites, Seattle, WA, USA, 24-27 Sept 2018, pp. 1032-1041. ISBN 9781510872073
Fotouhi, M. , Jalalvand, M., Wu, X. and Wisnom, M.R. (2018) Bearing and Bypass Bearing of Pseudo-ductile Thin-ply Carbon/Glass Hybrids. 21st International Conference on Composite Structures (ICCS21), Bologna, Italy, 4-7 Sept 2018.
Fotouhi, M. , Jalalvand, M., Wu, X. and Wisnom, M.R. (2018) Compact Tension Test Behaviour of Pseudo-ductile Thin-ply Carbon/Glass Hybrids. 21st International Conference on Composite Structures (ICCS21), Bologna, Italy, 4-7 Sept 2018.
Fotouhi, M. , Jalalvand, M. and Wisnom, M. R. (2018) Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates. Composites Part A: Applied Science and Manufacturing, 110, pp. 29-44. (doi: 10.1016/j.compositesa.2018.04.012)
Sobhani, A., Saeedifar, M., Najafabadi, M. A., Fotouhi, M. and Zarouchas, D. (2018) The study of buckling and post-buckling behavior of laminated composites consisting multiple delaminations using acoustic emission. Thin-Walled Structures, 127, pp. 145-156. (doi: 10.1016/j.tws.2018.02.011)
Bolouri, A. and Fotouhi, M. (2018) High-performance Composite T-joints: Topological Design Strategy Towards Strength Improvement and Weight Reduction. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
De, M., Pozegic, T., Hamerton, I. and Fotouhi, M. (2018) Development and Evaluation of a Novel Piezoelectric PVDF Sensor as a Load Spectrum Counter. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Fotouhi, M. , Jalalvand, M., Prato, A. and Wisnom, M. R. (2018) Thin Ply Carbon/ Glass Hybrid Laminates to Activate New Damage Mechanisms Under Indentation. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Jalalvand, M., Wu, H. W. M. L., Sheibanian, F., Fotouhi, M. and Wisnom, M. R. (2018) Self-warning Hybrid Composite Patches for Repairing Cracked Aluminium Panels. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Wisnom, M. R., Czél, G., Fotouhi, M. , Fuller, J., Jalalvand, M., Rev, T. and Wu, X. (2018) Reduced Notch-Sensitivity in Pseudo-Ductile Thin-Ply Composites. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Wu, X., Fuller, J.D., Fotouhi, M. and Wisnom, M. (2018) Bearing Failure of Pseudo-ductile Thin Ply Angle-ply Laminates. In: 18th European Conference on Composite Materials (ECCM 18), Athens, Greece, 24-28 June 2018,
Saeedifar, M., Ahmadi Najafabadi, M., Mohammadi, K., Fotouhi, M. , Hosseini Toudeshky, H. and Mohammadi, R. (2018) Acoustic emission-based methodology to evaluate delamination crack growth under quasi-static and fatigue loading conditions.Journal of Nondestructive Evaluation, 37(1), 1. (doi: 10.1007/s10921-017-0454-0)
Pashmforoush, F., Fotouhi, M. and Sarhan, A. A. D. (2018) Experimental–numerical study on minimizing impact induced damage in laminated composites under low-velocity impact. Journal of Reinforced Plastics and Composites, 37(3), pp. 155-165. (doi: 10.1177/0731684417737166)
Czél, G., Rev, T., Jalalvand, M., Fotouhi, M. , Longana, M. L., Nixon-Pearson, O. J. and Wisnom, M. R. (2018) Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon/epoxy thin-ply hybrid composites. Composites Part A: Applied Science and Manufacturing, 104, pp. 151-164. (doi: 10.1016/j.compositesa.2017.10.028)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M. (2018) Acoustic emission monitoring of thin ply hybrid composites under repeated quasi-static tensile loading. FME Transactions, 46, pp. 238-244. (doi: 10.5937/fmet1802238F)
Sadeghi, S., Karimi, Z., Fotouhi, M. , Hasani, M., Najafabadi, M. A. and Pavlović, A. (2018) Residual stress evaluation in friction stir welding of aluminium plates by means of acoustic emission and ultrasonic waves. FME Transactions, 46, pp. 230-237. (doi: 10.5937/fmet1802230S)
2017
Jalalvand, M., Fotouhi, M. and Wisnom, M. R. (2017) Orientation-dispersed pseudo-ductile hybrid composite laminates – a new lay-up concept to avoid free-edge delamination. Composites Science and Technology, 153, pp. 232-240. (doi: 10.1016/j.compscitech.2017.10.011)
Fotouhi, M. , Jalalvand, M. and Wisnom, M. R. (2017) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour in all fibre orientations. Composites Science and Technology, 152, pp. 101-110. (doi: 10.1016/j.compscitech.2017.08.024)
Zarif Karimi, N., Heidary, H., Fotouhi, M. and Minak, G. (2017) Experimental analysis of GFRP laminates subjected to compression after drilling. Composite Structures, 169, pp. 144-152. (doi: 10.1016/j.compstruct.2017.01.017)
Fotouhi, M. , Sadeghi, S., Jalalvand, M. and Ahmadi, M. (2017) Analysis of the damage mechanisms in mixed-mode delamination of laminated composites using acoustic emission data clustering. Journal of Thermoplastic Composite Materials, 30(3), pp. 318-340. (doi: 10.1177/0892705715598362)
Fotouhi, M. , Sadeghi, S., Jalalvand, M. and Ahmadi, M. (2017) Analysis of the damage mechanisms in mixed-mode delamination of laminated composites using acoustic emission data clustering. Journal of Thermoplastic Composite Materials, 30(3), pp. 318-340. (doi: 10.1177/0892705715598362)
Fotouhi, M. , Saghafi, H., Brugo, T., Minak, G., Fragassa, C., Zucchelli, A. and Ahmadi, M. (2017) Effect of PVDF nanofibers on the fracture behavior of composite laminates for high-speed woodworking machines. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 231(1), pp. 31-43. (doi: 10.1177/0954406216650711)
Fotouhi, M. , Jalalvand, I. and Wisnom, M. (2017) Demonstration of Pseudo-ductility in High Performance Quasi-isotropic Thin Ply Carbon/glass Hybrid Composites. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Fotouhi, M. , Jalalvand, M., Longana, M., Fuller, J. and Wisnom, M.R. (2017) The High Strain Rate Tension Behaviour of Pseudo-ductile High Performance Thin Ply Carbon/Glass Hybrid Composites. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
Fotouhi, M. , Saeedifar, M., Yousefi, J. and Fotouhi, S. (2017) Application of acoustic emission technique in delamination of laminated composites. In: Barile, C. and Pappalettera, G. (eds.) Focus on Acoustic Emission Research. Nova Science Publishers. ISBN 9781536118483
Fotouhi, M. , Xiao, B., Pozegic, T., Jalalvand, M., Hamerton, I. and Wisnom, M. (2017) High Performance Piezo Electric Nanocomposite Sensor Nodes for Structural Health Monitoring. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Jalalvand, I., Fotouhi, M. , Leong, M. C. and Wisnom, M. (2017) A Novel Technique to Accurately Measure the Fibre Failure Strain in Composite Laminates Under a Combined In-plane Tension and Shear Stress State. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Leong, M.C., Fotouhi, M. , Jalalvand, M., Sun, X.C. and Wisnom, M.R. (2017) A Comparison of Damage Mechanisms in Scaled Static Indentation Tests on Glass and Carbon Fibre Laminates. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
Suwart, P., Fotouhi, M. , Czel, G. and Wisnom, M. (2017) Fatigue Behaviour of Pseudo-ductile Thin Ply Hybrid Composites. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Zarif, N., Fotouhi, M. and Minak, G. (2017) A Thrust and Feed Prediction Model for Drilling of Composite Materials. In: 3rd International Conference on Mechanics of Composites (MECHCOMP3), Bologna, Italy, 4-7 July 2017, ISBN 9788893850292(doi:10.15651/978-88-9385-029-2)
Zarif, N., Fotouhi, M. , Heidary, H. and Minak, G. (2017) Effect of Hole Machining Damages on Bending Strength of Composite Laminates. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
Fotouhi, M. , Jalalvand, M. and Wisnom, M. R. (2017) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour in all fibre orientations. Composites Science and Technology, 152, pp. 101-110. (doi: 10.1016/j.compscitech.2017.08.024)
Zarif Karimi, N., Heidary, H., Fotouhi, M. and Minak, G. (2017) Experimental analysis of GFRP laminates subjected to compression after drilling. Composite Structures, 169, pp. 144-152. (doi: 10.1016/j.compstruct.2017.01.017)
Fotouhi, M. , Sadeghi, S., Jalalvand, M. and Ahmadi, M. (2017) Analysis of the damage mechanisms in mixed-mode delamination of laminated composites using acoustic emission data clustering. Journal of Thermoplastic Composite Materials, 30(3), pp. 318-340. (doi: 10.1177/0892705715598362)
Fotouhi, M. , Sadeghi, S., Jalalvand, M. and Ahmadi, M. (2017) Analysis of the damage mechanisms in mixed-mode delamination of laminated composites using acoustic emission data clustering. Journal of Thermoplastic Composite Materials, 30(3), pp. 318-340. (doi: 10.1177/0892705715598362)
Fotouhi, M. , Saghafi, H., Brugo, T., Minak, G., Fragassa, C., Zucchelli, A. and Ahmadi, M. (2017) Effect of PVDF nanofibers on the fracture behavior of composite laminates for high-speed woodworking machines. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 231(1), pp. 31-43. (doi: 10.1177/0954406216650711)
Fotouhi, M. , Jalalvand, I. and Wisnom, M. (2017) Demonstration of Pseudo-ductility in High Performance Quasi-isotropic Thin Ply Carbon/glass Hybrid Composites. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Fotouhi, M. , Jalalvand, M., Longana, M., Fuller, J. and Wisnom, M.R. (2017) The High Strain Rate Tension Behaviour of Pseudo-ductile High Performance Thin Ply Carbon/Glass Hybrid Composites. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
Fotouhi, M. , Saeedifar, M., Yousefi, J. and Fotouhi, S. (2017) Application of acoustic emission technique in delamination of laminated composites. In: Barile, C. and Pappalettera, G. (eds.) Focus on Acoustic Emission Research. Nova Science Publishers. ISBN 9781536118483
Fotouhi, M. , Xiao, B., Pozegic, T., Jalalvand, M., Hamerton, I. and Wisnom, M. (2017) High Performance Piezo Electric Nanocomposite Sensor Nodes for Structural Health Monitoring. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Jalalvand, I., Fotouhi, M. , Leong, M. C. and Wisnom, M. (2017) A Novel Technique to Accurately Measure the Fibre Failure Strain in Composite Laminates Under a Combined In-plane Tension and Shear Stress State. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Leong, M.C., Fotouhi, M. , Jalalvand, M., Sun, X.C. and Wisnom, M.R. (2017) A Comparison of Damage Mechanisms in Scaled Static Indentation Tests on Glass and Carbon Fibre Laminates. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
Suwart, P., Fotouhi, M. , Czel, G. and Wisnom, M. (2017) Fatigue Behaviour of Pseudo-ductile Thin Ply Hybrid Composites. In: 21st International Conference on Composite Materials (ICCM-21), Xi'an, China, 20-25 Aug 2017,
Zarif, N., Fotouhi, M. and Minak, G. (2017) A Thrust and Feed Prediction Model for Drilling of Composite Materials. In: 3rd International Conference on Mechanics of Composites (MECHCOMP3), Bologna, Italy, 4-7 July 2017, ISBN 9788893850292(doi:10.15651/978-88-9385-029-2)
Zarif, N., Fotouhi, M. , Heidary, H. and Minak, G. (2017) Effect of Hole Machining Damages on Bending Strength of Composite Laminates. In: 20th International Conference on Composite Structures (ICCS20), Paris, France, 4-7 Sept 2017, ISBN 9788893850414 (doi:10.15651/978-88-938-5041-4)
2016
Saeedifar, M., Fotouhi, M. and Ahmadi Najafabadi, M. (2016) Investigation of push-out delamination using cohesive zone modelling and acoustic emission technique. Journal of Composite Materials, 50(25), pp. 3577-3588. (doi: 10.1177/0021998315622983)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czel, G. and Wisnom, M. R. (2016) Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission. Composites Part A: Applied Science and Manufacturing, 86, pp. 66-76. (doi: 10.1016/j.compositesa.2016.04.003)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Acoustic Emission Monitoring of Thin Ply Hybrid Composites Under Repeated Quasi-static Tensile Loading. In: 15th Youth Symposium on Experimental Solid Mechanics (YSESM 15), Rimini, Italy, 8-11 June 2016,
Nazmdar Shahri, M., Yousefi, J., Fotouhi, M. and Ahmadi Najfabadi, M. (2016) Damage evaluation of composite materials using acoustic emission features and Hilbert transform. Journal of Composite Materials, 50(14), pp. 1897-1907. (doi: 10.1177/0021998315597555)
Saeedifar, M., Fotouhi, M. , Ahmadi Najafabadi, M., Hosseini Toudeshky, H. and Minak, G. (2016) Prediction of quasi-static delamination onset and growth in laminated composites by acoustic emission. Composites Part B: Engineering, 85, pp. 113-122.(doi: 10.1016/j.compositesb.2015.09.037)
Czél, G., Rév, T., Jalalvand, M., Fotouhi, M. and Wisnom, M.R. (2016) Demonstration of Pseudo-ductility in Quasi-isotropic Laminates Comprising Thin-ply UD Carbon/epoxy Hybrid Sub-laminates. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Fotouhi, M. , Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Avoiding Free Edge Delamination in Quasi-Isotropic Pseudo-ductile Hybrid Laminates – By Material Dispersion or Layer Angle Dispersion? In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Acoustic Emission Based Method to Characterise the Damage Modes in UD Thin Carbon/glass Hybrid Laminates. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Minak, G., Fotouhi, M. and Ahmadi, M. (2016) Low-velocity impact of laminates. In: Silberschmidt, V. V. (ed.) Dynamic Deformation, Damage and Fracture in Composite Materials and Structures. Elsevier (Woodhead Publishing). ISBN 9780081000809
Palazzetti, R., Brugo, T., Minak, G., Zucchelli, A., Yan, X., Saghafi, H. and Fotouhi, M. (2016) A Study on Fatigue Behavior of Nanointerleaved Woven CFRP. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Saeedifar, M., Fotouhi, M. , Zarif, N., Ahmadi, M., Hosseini Toudeshky, H. and Minak, G. (2016) Prediction of Delamination Growth in Glass/epoxy Composites Using Acoustic Emission. In: 2nd International Conference on Mechanics of Composites (MECHCOMP2), Porto, Portugal, 11-14 July 2016, ISBN 9788874889631 (doi:10.15651/978-88-748-8963-1)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czel, G. and Wisnom, M. R. (2016) Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission. Composites Part A: Applied Science and Manufacturing, 86, pp. 66-76. (doi: 10.1016/j.compositesa.2016.04.003)
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Acoustic Emission Monitoring of Thin Ply Hybrid Composites Under Repeated Quasi-static Tensile Loading. In: 15th Youth Symposium on Experimental Solid Mechanics (YSESM 15), Rimini, Italy, 8-11 June 2016,
Nazmdar Shahri, M., Yousefi, J., Fotouhi, M. and Ahmadi Najfabadi, M. (2016) Damage evaluation of composite materials using acoustic emission features and Hilbert transform. Journal of Composite Materials, 50(14), pp. 1897-1907. (doi: 10.1177/0021998315597555)
Saeedifar, M., Fotouhi, M. , Ahmadi Najafabadi, M., Hosseini Toudeshky, H. and Minak, G. (2016) Prediction of quasi-static delamination onset and growth in laminated composites by acoustic emission. Composites Part B: Engineering, 85, pp. 113-122.(doi: 10.1016/j.compositesb.2015.09.037)
Czél, G., Rév, T., Jalalvand, M., Fotouhi, M. and Wisnom, M.R. (2016) Demonstration of Pseudo-ductility in Quasi-isotropic Laminates Comprising Thin-ply UD Carbon/epoxy Hybrid Sub-laminates. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Fotouhi, M. , Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Avoiding Free Edge Delamination in Quasi-Isotropic Pseudo-ductile Hybrid Laminates – By Material Dispersion or Layer Angle Dispersion? In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Fotouhi, M. , Suwarta, P., Jalalvand, M., Czél, G. and Wisnom, M.R. (2016) Acoustic Emission Based Method to Characterise the Damage Modes in UD Thin Carbon/glass Hybrid Laminates. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Minak, G., Fotouhi, M. and Ahmadi, M. (2016) Low-velocity impact of laminates. In: Silberschmidt, V. V. (ed.) Dynamic Deformation, Damage and Fracture in Composite Materials and Structures. Elsevier (Woodhead Publishing). ISBN 9780081000809
Palazzetti, R., Brugo, T., Minak, G., Zucchelli, A., Yan, X., Saghafi, H. and Fotouhi, M. (2016) A Study on Fatigue Behavior of Nanointerleaved Woven CFRP. In: 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-30 June 2016, ISBN 9783000533877
Saeedifar, M., Fotouhi, M. , Zarif, N., Ahmadi, M., Hosseini Toudeshky, H. and Minak, G. (2016) Prediction of Delamination Growth in Glass/epoxy Composites Using Acoustic Emission. In: 2nd International Conference on Mechanics of Composites (MECHCOMP2), Porto, Portugal, 11-14 July 2016, ISBN 9788874889631 (doi:10.15651/978-88-748-8963-1)
2015
Zarif Karimi, N., Fotouhi, M. , Saeedifar, M., Minak, G. and Ahmadi Najafabadi, M. (2015) Inter-laminar Fracture Toughness Measurement of the Mixed-mode Delamination Using Acoustic Emission Technique. 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal, 15-18 Jun 2015.
Mohammadi, R., Saeedifar, M., Toudeshky, H. H., Najafabadi, M. A. and Fotouhi, M. (2015) Prediction of delamination growth in carbon/epoxy composites using a novel acoustic emission-based approach. Journal of Reinforced Plastics and Composites, 34(11), pp. 868-878. (doi: 10.1177/0731684415583166)
Saeedifar, M., Fotouhi, M. , Ahmadi Najafabadi, M. and Hosseini Toudeshky, H. (2015) Prediction of delamination growth in laminated composites using acoustic emission and Cohesive Zone Modeling techniques. Composite Structures, 124, pp. 120-127.(doi: 10.1016/j.compstruct.2015.01.003)
Fotouhi, M. , Saeedifar, M., Sadeghi, S., Ahmadi Najafabadi, M. and Minak, G. (2015) Investigation of the damage mechanisms for mode I delamination growth in foam core sandwich composites using acoustic emission. Structural Health Monitoring, 14(3), pp. 265-280. (doi: 10.1177/1475921714568403)
Brugo, T.M., Minak, G., Zucchelli, A., Saghafi, H. and Fotouhi, M. (2015) An investigation on the fatigue based delamination of woven carbon-epoxy composite laminates reinforced with polyamide nanofibers. Procedia Engineering, 109, pp. 65-72. (doi: 10.1016/j.proeng.2015.06.208)
Mohammadi, R., Saeedifar, M., Toudeshky, H. H., Najafabadi, M. A. and Fotouhi, M. (2015) Prediction of delamination growth in carbon/epoxy composites using a novel acoustic emission-based approach. Journal of Reinforced Plastics and Composites, 34(11), pp. 868-878. (doi: 10.1177/0731684415583166)
Saeedifar, M., Fotouhi, M. , Ahmadi Najafabadi, M. and Hosseini Toudeshky, H. (2015) Prediction of delamination growth in laminated composites using acoustic emission and Cohesive Zone Modeling techniques. Composite Structures, 124, pp. 120-127.(doi: 10.1016/j.compstruct.2015.01.003)
Fotouhi, M. , Saeedifar, M., Sadeghi, S., Ahmadi Najafabadi, M. and Minak, G. (2015) Investigation of the damage mechanisms for mode I delamination growth in foam core sandwich composites using acoustic emission. Structural Health Monitoring, 14(3), pp. 265-280. (doi: 10.1177/1475921714568403)
Brugo, T.M., Minak, G., Zucchelli, A., Saghafi, H. and Fotouhi, M. (2015) An investigation on the fatigue based delamination of woven carbon-epoxy composite laminates reinforced with polyamide nanofibers. Procedia Engineering, 109, pp. 65-72. (doi: 10.1016/j.proeng.2015.06.208)
2014
Pashmforoush, F., Khamedi, R., Fotouhi, M. , Hajikhani, M. and Ahmadi, M. (2014) Damage classification of sandwich composites using acoustic emission technique and k-means genetic algorithm. Journal of Nondestructive Evaluation, 33(4), pp. 481-492.(doi: 10.1007/s10921-014-0243-y)
Saeedifar, M., Fotouhi, M. , Najafabadi, M. A. and Toudeshky, H. H. (2014) Interlaminar fracture toughness evaluation in glass/epoxy composites using Acoustic Emission and Finite Element Methods. Journal of Materials Engineering and Performance, 24(1), pp. 373-384. (doi: 10.1007/s11665-014-1291-2)
Fotouhi, M. and Ahmadi Najafabadi, M. (2014) Investigation of the mixed-mode delamination in polymer-matrix composites using acoustic emission technique. Journal of Reinforced Plastics and Composites, 33(19), pp. 1767-1782. (doi: 10.1177/0731684414544391)
Mohammadi, R., Saeedifar, M., Fotouhi, M. , Teymuri, C. and Najafabadi, M. A. (2014) Determination of fracture toughness of heat treated AISI D2 steel using Finite Element and Acoustic Emission methods. Journal of Modares Mechanical Engineering, 14(11), pp. 1-8.
Saeedifar, M., Fotouhi, M. , Mohammadi, R., Ahmadi, M., Teymuri, C. and Hajikhani, M. (2014) Classification of damage mechanisms during delamination growth in sandwich composites by acoustic emission. Journal of Modares Mechanical Engineering, 14(6), pp. 144-152.
Saeedifar, M., Fotouhi, M. , Mohammadi, R., Najafabadi, M. A., Teymuri, C. and Toudeshky, H. H. (2014) Investigation of delamination and interlaminar fracture toughness assessment of glass/epoxy composite by acoustic emission. Journal of Modares Mechanical Engineering, 14(4), pp. 1-11.
Dastjerdi, P. B., Fotouhi, M. , Fotouhi, S. and Ahmadi, M. (2014) Acoustic emission based study to monitor the initiation and growth of delamination in composite materials. Journal of Modares Mechanical Engineering, 14(3), pp. 78-84.
Fotouhi, M. , Belalpour Dastjerdi, P. and Ahmadi, M. (2014) Acoustic emission based method to characterize glass/epoxy composite damages during 3-point bending test. International Journal of Material Sciences, 4(1), p. 22. (doi: 10.14355/ijmsci.2014.0401.04)
Fotouhi, M. , Heidary, H., Pashmforoush, F. and Ahmadi, M. (2014) Acoustic Emission Based Study to Characterize Delamination Damage in Laminated Composite Materials. IREC 2014, Tehran, Iran, 2014.
Fotouhi, M. , Hosseini, K., Shallo, M. and Ahmadi, M. (2014) Study of Delamination Damage in Composites Laminates Using Acoustic Emission Technique. In: 4th International Conference on Acoustics and Vibration (ISAV 2014), Tehran, Iran, 10-11 December 2014,
Fotouhi, M. , Poursoleimani, H. and Fotouhi, S. (2014) Experimental Study of the Mechanical and Vibrational Behaviors of Glass-Reinforced Aluminum Laminates. In: 4th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-4), Tehran, Iran, 16-17 December 2014,
Saeedifar, M., Fotouhi, M. , Najafabadi, M. A. and Toudeshky, H. H. (2014) Interlaminar fracture toughness evaluation in glass/epoxy composites using Acoustic Emission and Finite Element Methods. Journal of Materials Engineering and Performance, 24(1), pp. 373-384. (doi: 10.1007/s11665-014-1291-2)
Fotouhi, M. and Ahmadi Najafabadi, M. (2014) Investigation of the mixed-mode delamination in polymer-matrix composites using acoustic emission technique. Journal of Reinforced Plastics and Composites, 33(19), pp. 1767-1782. (doi: 10.1177/0731684414544391)
Mohammadi, R., Saeedifar, M., Fotouhi, M. , Teymuri, C. and Najafabadi, M. A. (2014) Determination of fracture toughness of heat treated AISI D2 steel using Finite Element and Acoustic Emission methods. Journal of Modares Mechanical Engineering, 14(11), pp. 1-8.
Saeedifar, M., Fotouhi, M. , Mohammadi, R., Ahmadi, M., Teymuri, C. and Hajikhani, M. (2014) Classification of damage mechanisms during delamination growth in sandwich composites by acoustic emission. Journal of Modares Mechanical Engineering, 14(6), pp. 144-152.
Saeedifar, M., Fotouhi, M. , Mohammadi, R., Najafabadi, M. A., Teymuri, C. and Toudeshky, H. H. (2014) Investigation of delamination and interlaminar fracture toughness assessment of glass/epoxy composite by acoustic emission. Journal of Modares Mechanical Engineering, 14(4), pp. 1-11.
Dastjerdi, P. B., Fotouhi, M. , Fotouhi, S. and Ahmadi, M. (2014) Acoustic emission based study to monitor the initiation and growth of delamination in composite materials. Journal of Modares Mechanical Engineering, 14(3), pp. 78-84.
Fotouhi, M. , Belalpour Dastjerdi, P. and Ahmadi, M. (2014) Acoustic emission based method to characterize glass/epoxy composite damages during 3-point bending test. International Journal of Material Sciences, 4(1), p. 22. (doi: 10.14355/ijmsci.2014.0401.04)
Fotouhi, M. , Heidary, H., Pashmforoush, F. and Ahmadi, M. (2014) Acoustic Emission Based Study to Characterize Delamination Damage in Laminated Composite Materials. IREC 2014, Tehran, Iran, 2014.
Fotouhi, M. , Hosseini, K., Shallo, M. and Ahmadi, M. (2014) Study of Delamination Damage in Composites Laminates Using Acoustic Emission Technique. In: 4th International Conference on Acoustics and Vibration (ISAV 2014), Tehran, Iran, 10-11 December 2014,
Fotouhi, M. , Poursoleimani, H. and Fotouhi, S. (2014) Experimental Study of the Mechanical and Vibrational Behaviors of Glass-Reinforced Aluminum Laminates. In: 4th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-4), Tehran, Iran, 16-17 December 2014,
2013
Fotouhi, M. , Sindi, C. T., Ahmadi, M. and Pashmforoush, F. (2013) Fracture characteristics of AISI D2 tool steel at different tempering temperatures using acoustic emission and fuzzy C-means clustering. Arabian Journal for Science and Engineering, 38(8), pp. 2205-2217. (doi: 10.1007/s13369-013-0579-0)
Fotouhi, M. , Teymuri, C. and Ahmadi, M. (2013) Determination of Metallic Materials Toughness Using Acoustic Emission Monitoring Technique. Iran’s 3rd International Conference on Industrial Automation, Tehran, Iran, 2013.
Mahdian, A., Fotouhi, M. and Ahmadi, M. (2013) Study of the Damage in Laminated Composite Caused by Impact Using Acoustic Emission Method. 3rd
International Conference on Acoustics and Vibration (ISAV2013), Tehran, Iran, 2013.
Fotouhi, M. , Teymuri, C. and Ahmadi, M. (2013) Determination of Metallic Materials Toughness Using Acoustic Emission Monitoring Technique. Iran’s 3rd International Conference on Industrial Automation, Tehran, Iran, 2013.
Mahdian, A., Fotouhi, M. and Ahmadi, M. (2013) Study of the Damage in Laminated Composite Caused by Impact Using Acoustic Emission Method. 3rd
International Conference on Acoustics and Vibration (ISAV2013), Tehran, Iran, 2013.
2012
Mostafavi, S., Fotouhi, M. , Motasemi, A., Ahmadi, M. and Sindi, C. T. (2012) Acoustic emission methodology to evaluate the fracture toughness in heat treated AISI D2 tool steel. Journal of Materials Engineering and Performance, 21(10), pp. 2106-2116.(doi: 10.1007/s11665-011-0119-6)
Fotouhi, M. , Heidary, H., Ahmadi, M. and Pashmforoush, F. (2012) Characterization of composite materials damage under quasi-static three-point bending test using wavelet and fuzzy C-means clustering. Journal of Composite Materials, 46(15), pp. 1795-1808. (doi: 10.1177/0021998311425968)
Pashmforoush, F., Fotouhi, M. and Ahmadi, M. (2012) Damage characterization of glass/epoxy composite under three-point bending test using acoustic emission technique. Journal of Materials Engineering and Performance, 21(7), pp. 1380-1390. (doi: 10.1007/s11665-011-0013-2)
Pashmforoush, F., Fotouhi, M. and Ahmadi, M. (2012) Acoustic emission-based damage classification of glass/polyester composites using harmony search k-means algorithm. Journal of Reinforced Plastics and Composites, 31(10), pp. 671-680. (doi: 10.1177/0731684412442257)
Fotouhi, M. , Fotouhi, H., Belalpour, P. and Ahmadi, M. (2012) Monitoring of Initiation and Growth of Delamination in Composite Materials Using Acoustic Emission and Energy Function. 6th Condition Monitoring and Fault Diagnosis Conference (CMFD2012), Tehran, Iran, 28-29 February 2012.
Fotouhi, M. , Fotouhi, S., Belalpour, P. and Ahmadi, M. (2012) Damage Characterization of Laminated Composites Under Quasi-Static 3-Pointbending Test Using Power Spectrum Analysis. 6th Condition Monitoring and Fault Diagnosis Conference (CMFD2012), Tehran, Iran, 28-29 February 2012.
Fotouhi, M. , Yousefi, J., Ahmadi, M. and Fotouhi, H. (2012) Monitoring the Initiation and Growth of Delamination in Composite Materials Using Acoustic Emission. 3rd International Conference On Composites:characterization, Fabrication And Application (CCFA), Tehran, Iran, 18-19 December 2012.
Fotouhi, M. , Heidary, H., Ahmadi, M. and Pashmforoush, F. (2012) Characterization of composite materials damage under quasi-static three-point bending test using wavelet and fuzzy C-means clustering. Journal of Composite Materials, 46(15), pp. 1795-1808. (doi: 10.1177/0021998311425968)
Pashmforoush, F., Fotouhi, M. and Ahmadi, M. (2012) Damage characterization of glass/epoxy composite under three-point bending test using acoustic emission technique. Journal of Materials Engineering and Performance, 21(7), pp. 1380-1390. (doi: 10.1007/s11665-011-0013-2)
Pashmforoush, F., Fotouhi, M. and Ahmadi, M. (2012) Acoustic emission-based damage classification of glass/polyester composites using harmony search k-means algorithm. Journal of Reinforced Plastics and Composites, 31(10), pp. 671-680. (doi: 10.1177/0731684412442257)
Fotouhi, M. , Fotouhi, H., Belalpour, P. and Ahmadi, M. (2012) Monitoring of Initiation and Growth of Delamination in Composite Materials Using Acoustic Emission and Energy Function. 6th Condition Monitoring and Fault Diagnosis Conference (CMFD2012), Tehran, Iran, 28-29 February 2012.
Fotouhi, M. , Fotouhi, S., Belalpour, P. and Ahmadi, M. (2012) Damage Characterization of Laminated Composites Under Quasi-Static 3-Pointbending Test Using Power Spectrum Analysis. 6th Condition Monitoring and Fault Diagnosis Conference (CMFD2012), Tehran, Iran, 28-29 February 2012.
Fotouhi, M. , Yousefi, J., Ahmadi, M. and Fotouhi, H. (2012) Monitoring the Initiation and Growth of Delamination in Composite Materials Using Acoustic Emission. 3rd International Conference On Composites:characterization, Fabrication And Application (CCFA), Tehran, Iran, 18-19 December 2012.
2011
Fotouhi, M. , Pashmforoush, F., Ahmadi, M. and Refahi Oskouei, A. (2011) Monitoring the initiation and growth of delamination in composite materials using acoustic emission under quasi-static three-point bending test. Journal of Reinforced Plastics and Composites, 30(17), pp. 1481-1493. (doi: 10.1177/0731684411415140)
Fotouhi, M. and Ahmadi, M. (2011) Detection of Damage Mechanisms in Delamination of Composite Materials Using Wavelet Analysis. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. and Ahmadi, M. (2011) Monitoring of Initiation and Growth of Delamination Using Acoustic Emission and Energy Function. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. and Ahmadi, M. (2011) Online Monitoring of Glass/Polyester Composites During Mode I Delamination Test Using Acoustic Emission Method. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. , Heidary, H., Pashmforoush, F. and Ahmadi, M. (2011) Composite Materials Damage Characterization Under Quasi-Static 3-Point Bending Test Using Fuzzy C-Means Clustering. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), Singapore, 26-28 February 2011,
Zeinali, M., Fotouhi, M. and Ahmadi, M. (2011) Study of Effect of Micro-Structure on Developing of Residual Stresses for Med During Welding of Carbon Steels. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. and Ahmadi, M. (2011) Detection of Damage Mechanisms in Delamination of Composite Materials Using Wavelet Analysis. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. and Ahmadi, M. (2011) Monitoring of Initiation and Growth of Delamination Using Acoustic Emission and Energy Function. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. and Ahmadi, M. (2011) Online Monitoring of Glass/Polyester Composites During Mode I Delamination Test Using Acoustic Emission Method. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
Fotouhi, M. , Heidary, H., Pashmforoush, F. and Ahmadi, M. (2011) Composite Materials Damage Characterization Under Quasi-Static 3-Point Bending Test Using Fuzzy C-Means Clustering. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), Singapore, 26-28 February 2011,
Zeinali, M., Fotouhi, M. and Ahmadi, M. (2011) Study of Effect of Micro-Structure on Developing of Residual Stresses for Med During Welding of Carbon Steels. In: 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 December 2011,
2010
Fotouhi, M. , Heidary, H., Ahmadi, M. and Shams, S. (2010) Wavelet-based Acoustic Emission Monitoring of Composite Materials Damage Under Quasi-static 3-point Bending Test. In: 2nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2), Kish, Iran, 27-30 Dec 2010,
Fotouhi, M. , Rahimi, A., Shams, S. and Rezaei, M. (2010) Feasibility Study of Using Flexible Manufacturing Systems in Car Industry. In: 11th Iranian Conference on Manufacturing Engineering (ICME 2010), Tabriz, Iran, 19th October 2010,
Fotouhi, M. , Rahimi, A., Shams, S. and Rezaei, M. (2010) Feasibility Study of Using Flexible Manufacturing Systems in Car Industry. In: 11th Iranian Conference on Manufacturing Engineering (ICME 2010), Tabriz, Iran, 19th October 2010,
Publications by other group authors
All | D. Barbera | S. Bin Jaber | I. Campbell | D. K. Do | M. Docherty | A. Feeney | S. Fotouhi | E. Frutos-Myro | P. Grassl | E. Grustan-Gutiérrez | A. Hamilton | P. Harrison | S. Kumar | J. Lee | P. Li | S. Liu | Y. Liu | A. McBride | G. Min | D. Mulvihill | J. Perris | J. Schneider | S. Sneddon | A. Tabatabaeian | C. Triantafyllou | C. Unluer | E. Wielewski | R. Williams | L. Yusuf
All | D. Barbera | S. Bin Jaber | I. Campbell | D. K. Do | M. Docherty | A. Feeney | S. Fotouhi | E. Frutos-Myro | P. Grassl | E. Grustan-Gutiérrez | A. Hamilton | P. Harrison | S. Kumar | J. Lee | P. Li | S. Liu | Y. Liu | A. McBride | G. Min | D. Mulvihill | J. Perris | J. Schneider | S. Sneddon | A. Tabatabaeian | C. Triantafyllou | C. Unluer | E. Wielewski | R. Williams | L. Yusuf